• NEWSLETTER 전기공업
• /
• no.97-1 s.170
• /
• pp.17-44
• /
• 1997

• NEWSLETTER 전기공업
• /
• no.97-15 s.184
• /
• pp.9-23
• /
• 1997

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.42-46
• /
• 2002

This research is conducted with the object of Piling up the foundation of design technologies for high temperature superconducting (HTS) power transformer which is thought to be as a powerful power transformer of next generation. In this study, not only the theoretical design of high temperature superconducting (HTS) transformer but also the arrangements of superconducting tape and the cooling method have been conducted. Moreover, electromagnetic analyses using finite element method (FEM) were conducted to confirm the efficiency of the designed transformer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.235-236
• /
• 2007

변압기형 전류제한기는 1차측이 선로와 연결되어 있고 2차측은 고온 초전도 소자가 연결되어 있다. 사고 시 고온 초전도 소자의 부담을 줄이고자 2차측에 무유도 션트 저항을 연결하여 특성을 분석하였다. 션트가 없을 때 선로전류 제한율은 좋은나 2차측에 있는 초전도 소자가 부담해야하는 전력은 크다. 션트가 있을 때는 선로전류 제한율은 감소하는 반면 초전도 소자가 부당해야하는 전력은 크게 줄어들었다. 이때 2차측의 전압과 전류 중 전압의 감소 폭이 더 컸으며 션트저항 값이 작을수록 전압의 크기는 더 작아졌다. 결론적으로 션트저항의 연결에 따라 제한율은 낮아지지만 소자가 부담해야하는 전력은 크게 줄어든다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.295-300
• /
• 2007

High temperature superconducting (HTS) windings for an HTS transformer which have been developed have two kinds of type, one is the layer winding and the other is disk winding. The layer winding has adopted for an HTS power transformer so far because of the small AC losses of the HTS windings. The disk windings have surface of the HTS wire. We propose a new winding method for a high voltage HTS transformer which has advantages of both type of HTS windings, and we call it continuous disk winding. This new HTS winding consists of pile of HTS disk windings. The continuous disk winding was fabricated with multi-stacked HTS wires for dover HTS transformer. We can check the potential possibility from the characteristic test of the fabricated winding. The new type HTS windings can be applied to HTS power transformers, especially to the high voltage ones.

• NEWSLETTER 전기공업
• /
• no.91-8 s.21
• /
• pp.1-23
• /
• 1991

• NEWSLETTER 전기공업
• /
• no.91-19 s.32
• /
• pp.1-17
• /
• 1991

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.945-947
• /
• 2005

변압기, 케이블, 한류기와 같은 고온초전도 선재의 전력기기의 개발과 응용에 있어서 교류손실은 기기의 운용과 효율에 밀접한 관계가 있기 때문에 중요한 연구 분야가 되고 있다. 또한 현재 전력기기에 응용 하고 있는 고온초전도 선재는 전력기기에 필요한 통전용량을 수용 할 수 없기 때문에 이를 해결하기 위한 방법으로 선재를 적층하여 통전용량을 증대시키는 다양한 방법이 연구되고 있다. 본 논문에서는 고온초전도 선재의 적층배열을 달리 하였을 때, 외부자계에 의한 고온초전도 선재의 자화손실 특성에 대해서 연구하였다. 선재의 적층 배열의 형상은 Edge-to-Edge, Face-to-Face형과 Matrix형이며, 적층배열에 사용한 선재의 개수는 2, 4, 8개이다. 연구결과, 동일한 적층 수의 조건하에서 Face-to-Face형의 적층배열이 다른 종류의 배열보다 자화손실이 낮음을 확인하였고, 이는 Face-to-Face 형태로 적층 될 때 인접선재로 인한 자기차폐효과가 다른 배열의 경우보다 우수하기 때문으로 보인다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.288-290
• /
• 2003

The transformer is expected to be an essential component of resistive type superconducting fault current limiter (SFCL) for both the increase of voltage ratings in SFCL and the simultaneous quench due to different critical current between HTSC elements. However, for the design to prevent the saturation of iron core and the effective fault current limitation, the analysis for operation of SFCL with consideration for the magnetization characteristics are required. In this paper, the fault current limiting characteristics related with the magnetization ones were investigated through the variation of the ratio of the number of turns in the 1st and the 2nd windings. The proper design condition with variation of the number of turns to make the effective fault current limiting operation could be determined.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.233-236
• /
• 2002

A conceptual design of single phase high Tc superconducting (HTS) 1MVA transformer was presented in this paper. The rated voltages of each sides of the transformer are 22.9kV /6.6kV respectively. Double pancake windings of BSCCO-2223 HTS tape and the room temperature shell type core are adopted. The HTS tapes of windings are going to be cooled down to 65K by sub-cooled liquid nitrogen. A cryostat made of nonmagnetic and nonconducting material with a bore is going to be used in order to locate the core out of the cryostat. This conceptual design will be modified and a fabrication of the machine is going to be based on the presented design in this paper.