• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.569-572
• /
• 2000

This paper presents the optimized fabrication and thermal characteristics of micro-heaters for thermal MEMS applications using a SDB SOI substrate. The micro-heater is based on a thermal measurement principle and contains for thermal isolation regions a 10$\mu\textrm{m}$ thick silicon membrane with oxide-filled trenches in the SOI membrane rim. The micro-heater was fabricated with Pt-RTD(Resistance Thermometer Device)on the same substrate by using MgO as medium layer. The thermal characteristics of the micro-heater with the SOI membrane is 280$^{\circ}C$ at input Power 0.9 W; for the SOI membrane with 10 trenches, it is 580$^{\circ}C$ due to reduction of the external thermal loss. Therefore, the micro-heater with trenches in SOI membrane rim provides a powerful and versatile alternative technology for improving the performance of micro thermal sensors and actuators.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.647-654
• /
• 2018

In order to solve the global warming and reduce greenhouse gas emissions, it has been developed the $CO_2$ capture technology by oxy-fuel combustion. But there is a problem that the economic efficiency is low because the oxygen production cost is high. ASU (Air Separation Unit) is known to be most suitable method for producing large capacity of oxygen (>2,000 tpd). But most of them are optimized for high purity (>99.5%) oxygen production. If the ASU process is optimized for low purity(90~97%) oxygen producing, it is possible to reduce the production cost of oxygen by improving the process efficiency. In this study, the process analysis and comparative evaluation was conducted for developing large capacity ASU for oxy-fuel combustion. The process efficiency was evaluated by calculating the recovery rate and power consumption according to the oxygen purity using the AspenHysys. As a result, it confirmed that the optimal purity of oxygen for oxyfuel combustion is 95%, and the power consumption can be reduced by process optimization to 12~18%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.288-290
• /
• 2014

In this paper, Escape and BTA(Bus Turn Around) modes of master bridge IC are implemented, which supports MIPI(Mobile Industry Processor Interface) DSI(Display Serial Interface) standard. MIPI DSI master bridge IC sends RGB data and various commands to display module(slave) in order to test it. The Escape mode is designed to implement LPDT, ULPS and trigger message transmissions. The BTA mode is designed to obtain various status information from slave in reverse direction. Functional simulation results show that the designed Escape and BTA modes work correctly for various conditions defined in MIPI DSI standard.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.157-159
• /
• 2014

In this paper, we introduce SlimSRP, an ultra-low-power digital signal processor (DSP) solution for mobile audio and voice applications. So far, application processors (APs) have taken charge of all the tasks in mobile devices. However, they have suffered from short battery life problems to deal with complex usage scenarios, such as always-on voice trigger with continuous audio playback. From extensive analysis of audio and voice application characteristics, SlimSRP is designed to relive the performance and power burden of APs. It employs three-issue VLIW architecture, and the major low-power and high-performance techniques include: (1) an optimized register-file architecture friendly for constants generation, (2) a powerful instruction set to reduce the number of register file accesses and (3) a unique instruction compression scheme that contributes to saved memory size and reduced cache miss. An implementation of SlimSRP runs at up to 200MHz and the logic occupies 95K NAND2 gates in Samsung 28LPP process. The experimental results demonstrate that a MP3 decoder application with a 128kbps 44.1kHz input can run at 5.1MHz and the logic consumes only 22uW/MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.101-108
• /
• 2004

A 16-bit adiabatic ALU(arithmetic logic unit) is designed. A simplified four-phase clock generator is also designed to provide supply clocks for the adiabatic circuits. All the clock line charge on the capacitive interconnections is recovered to recycle energy. Adiabatic circuits are designed based on ECRL (efficient charge recovery logic) using a 0.35${\mu}{\textrm}{m}$ CMOS technology. The post-layout simulation results show that the power consumption of the adiabatic ALU including supply clock generator is reduced by a factor of 1.15-1.77 compared to the conventional CMOS ALU with the same structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.175-181
• /
• 2006

Wireless sensor network forms the self-organization network, and transfers the information among sensor nodes that have computing technology ability and wireless communication ability. The recent sensor network is study for low-power, micro, low cost of node is proceeded. Recently, the research of application services in wireless sensor networks is proceeded. Therefore, in this paper, we design the prototype of the real-time information service that support a user the information of temperature, illumination etc. And, we implement the alarm application service fer the disaster prevention on Internet base on IPv4/IPv6. We develop the module of the extract information using the query processing based on TinyOS, and the module of the server's database using MySQL data base management system and JDBC. Additionally, we develop the client module that receive the real-time sensing data using ODBC in Internet based on IPv4/IPv6.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.228-233
• /
• 2001

This paper presents the optimized design, fabrication and thermal characteristics of micro-heaters for thermal MEMS (micro elelctro mechanical system) applications usign SOI (Si-on-insulator) and trench structures. The micro-heater is based on a thermal measurement principle and contains for thermal isolation regions a 10㎛ thick Si membrane with oxide-filled trenches in the SOI membrane rim. The micro-heater was fabricated with Pt-RTD (resistance thermometer device) on the same substrate by suing MgO as medium layer. The thermal characteristics of the micro-heater wit the SOI membrane is 280$\^{C}$ at input power 0.9W; for the SOI membrane with 10 trenches, it is 580$\^{C}$ due to reduction of the external thermal loss. Therefore, the micro-heater with trenches in SOI membrane rim provides a powerful and versatile alternative technology for improving the performance of micro-thermal sensors and actuators.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.29 no.7
• /
• pp.28-35
• /
• 2000

LNG 냉열 이용은 일본초저온(주)의 냉장보관 사업의 에너지절감 (65%)형 초저온 (-55$^{\circ}C$) 대형냉장고로 일본 뿐만 아니라 세계적으로 최초의 냉장업체이다. 회사 건설시는 입지선정, 경제성검토, 기술성, 공해상의 검토 등을 거쳐 완성된 업체로써 시설규모는 냉장 20,000 M/T, 1일 LNG 공급량 90M/T으로 현재 가동중이며 대부분의 동결 및 냉장 품목은 참치(마구로)가 83%를 차지하고 기타가 17% 였다. 냉장고의 가동율은 75%로 매우 높은 편이였다, LNG식 냉동장치의 가장 큰 장점은 일반적인 냉동방식 전력비의 1/3 밖에 소요되지 않는다는 것이다. L$N_2$의 내열이용 업체는 근기냉열(주)은 오사카의 천북에 있으며, L$N_2$를 자가 생산하여 면류 생산공장으로 직송하고 동결제조 하여 품질의 고급화 및 위생식품을 제조 판매하고 있다. 규모는 년간 2,000만식을 생산하고 주 생산제품은 조리면 및 냉동우동 등이다. L$N_2$의 소비가격은 전기식 냉동기에 비하여 5~9배의 고액이 소요되는 것이 결점이라고 할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2008.06a
• /
• pp.269-273
• /
• 2008

본 논문에서는 근거리 무선 통신을 이용하여 사용자의 현재 위치에서 일어나고 있는 교통사고, 화재, 환자발생 등의 긴급재난상황 목격시 사용자가 해당 상황을 ZigBee 기반의 무선 센서 네트워크 사용자에게 알리고, 알린 정보를 실시간 쉽게 확인 할 수 있도록 긴급재난상황을 모니터링 하는 시스템을 제안하였다. 근거리 무선 통신 중센서와 사용자 무선 단말기 사이의 데이터 전송 구조가 간단하고, 초저가의 센서 네트워크 구성시 낮은 전력을 소모하는 장점을 가진 ZigBee로 구현하였다. 현재 사용자 주변의 일어나는 긴급재난 상황을 주변 사용자와 ZigBee 기반의 무선 센서 네트워크를 구축하여 실시간으로 보다 정확한 정보를 주변 사용자에게 알려주거나 혹은 사용자가 모니터링을 하여 사용자의 피해를 최소화로 줄여 사용자의 안전과 편의를 향상시킨다.

• Information and Communications Magazine
• /
• v.24 no.8
• /
• pp.7-13
• /
• 2007

유비쿼터스 사회 실현의 핵심 기술인 RFID/USN 기술은 우리 정부의 USN구축 기본계획과u-IT839기술개발 정책에 따라 국산화, 기술 고도화 및 핵심 원천기술 개발을 전략적으로 추진하여 그 성과가 나타나고 있다. RFID/USN 기술은 가장 기본적인 사물의 식별 단계로부터, 이력 추적, 상태정보의 모니터링, 실시간 감시 및 제어, 자율형 서비스로 진화함에 따라 전통적인 RFID 및 무선센서네트워크에서 출발하여 궁극적으로 다양한 응용서비스를 지원하는 USN기술로 발전될 것이다. 향후 RFID 기술 분야는 상태정보처리 및 위치 추적 등 복합 기능과 성능 고도화로 발전되고 Item단위까지 적용하기 위한 새로운 리더, 초저가의 Printed 태그 및 불법 복제 방지 등의 새로운 기술이 개발될 전망이다. 센서네트워크 분야에서는 기존의 IEEE802.15.4와 ZigBee를 뛰어넘어 저전력, 고신뢰성, 확장성, 이동성 등을 지원하기 위해 효율적인 무선전송, 초경량의 노드, 네트워킹, Cross-layer최적화, 데이터 융합 등의 핵심기술 이 요구되고 USN 미들웨어 기술은 다양한 USN응용 서비스를 위해 공통 S/W 플랫폼을 제공하고 다양한 센서네트워크로부터 수집한 정보를 가공하여 서비스간 연계 통합하는 플랫폼으로 발전될 전망이다.