• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.131-136
• /
• 2008

The double-walled steel vessel with powder insulation in the space between the walls is used to minimize heat transfer by radiation and conduction in cryogenic storage tank. The vacuum required the insulation is much less extreme than with high-vacuum or multilayer insulations. The solid supports are used to bear the weight of the inner container. Thermal and structural analysis of the tank have been carried out to study the effect of vacuum and weldment geometry of the internal supports. Heat flux in wall is increased with increasing of thermal conductivity of perlite. Heat flux and stress of support is not affected by weldment geometry.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.802-808
• /
• 2011

One of the important mechanical properties of cryogenic temperature structure material is fracture toughness. Research on normalization of fracture toughness test method is becoming very important issue with development of cryogenic structural elements. Specially, mechanical properties estimation by each micro-structure of welding department is important because it can cause unstable fracture when use under cryogenic environment in case of welding department. In this study, fracture toughness estimation test was carried out to unloading compliance method and sensitization heat-tread minimized test specimen at liquid nitrogen (77K), liquid helium (4K), 293K temperature to STS-316L base metal and weld metal.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.72-76
• /
• 2010

To research and develop a high performance injector for LRE, it needs not only cold flow test, but also investigations of combustion performance, optimization of cyclogram and thermo-fluid dynamical characteristics of combustion flow field through hot-fire test. In this study, hot-fire test of LOX-CH4 coaxial swirl injector has been carried out using lab-scale hot fire test stand which can supply and control cryogenic propellant. Ignition and continuous combustion for LOX-$GCH_4$ propellant of 0.19 kg/s total mass flowrate and 2.80 O/F Ratio was achieved through cyclogram optimization. The mean combustion chamber pressure and thrust were measured as approximately 1.43 MPa and 38.7 kgf respectively.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2003.04a
• /
• pp.37-37
• /
• 2003

현재 뽕나무 유전자원의 보존은 다른 영양번식성 작물과 마찬가지로 주로 포장에 심어 보존하고 있으나, 유전자원의 포장보존은 기상재해, 병해충의 피해에 의해 멸실의 우려가 있을 뿐만 아니라 넓은 토지 및 많은 노력과 비용이 필요한 단점이 있다. 따라서, 이를 보완하기 위하여, 뽕나무 동아를 기내에 초저온 장기보존하는 방법을 개발하기 위하여 본 연구를 수행하였다. (중략)

• Journal of the Korean Institute of Gas
• /
• v.5 no.4 s.16
• /
• pp.85-91
• /
• 2001

This paper presents safety analysis of LNG leakage in a prestressed concrete outer tank, which is strongly related on the leak checking effects of the PC structure with and without a residual compression zone based on the BS 7777 codes. The full containment type outer tank which is constructed by a prestressed concrete may be destroyed by leaked cryogenic fluids. The FE calculated results show that the total leak checking time of the PC structure with $10\%$ residual compression zone is about 9 days for $-162^{\circ}C$ liquids. But, three primary pumps in an inner tank may operate to send cryogenic fluids for 6 days, which are stored in an inner tank of $140,000m^3$ capacity This means that the prestressed concrete outer tank may be safe for $-162^{\circ}C$ cryogenic fluids leaked from the demolished inner tank.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.37-48
• /
• 1998

A cryogenic liquid stored in the closed cryogenic tank has been studied at various liquid levels. The change of pressure, temperature, and liquid-vapor ratio in the tank depended on the liquid levels. The various phenomena were shown at different liquid levels as follows: (1) liquid level was increased with condensation of vapor: (2) liquid was vaporized in spite of liquid level going up for a certain initial period and then condensation of vapor occurred at higher pressure; (3) liquid was vaporized without liquid level change; (4) liquid was vaporized with liquid level decreasing. If the tank is full with cryogenic liquid, it is extremely dangerous because of soaring the pressure. Therefore the tank must be filled with $90\%$ liquid according to the safety rules. If the tank was filled with $0\%$ ullage, the pressure increment as high as 80bar during first 5 days. With $90\%$ liquid level, however, the pressure was increased as low as 1.5bar in the same period. No matter what the liquid level is, it is very dangerous if the tank is locked-up with filled cryogenic liquid for a long time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.363-369
• /
• 2007

Probably the most significant heat transfer in the cryogenic liquid hydrogen storage tank from the atmosphere may occur through its support system. In this paper the efficient support system for the cryogenic storage vessel was newly developed and analysed. The support system was composed of a spherical ball as a supporter to reduce the contact area. which is located between two supporting SUS tubes inserted SUS and PTFE blocks. Numerical analyses for temperature distribution, and the thermal stress and strain of the support system were performed by the commercial codes FLUENT and ANSYS. The heat transfer rate of the supporter was evaluated by the thermal boundary potential method which can consider the variation of thermal conductivity with temperature. The results showed that the heat transfer rate through the developed supporter compared with the common SUS tube supporter was significantly reduced. The thermal stress and strain were obtained well below the limited values. It was found that the developed supporter can be one of the most efficient support systems for cryogenic liquid storage vessel.

• Journal of the Korean Institute of Gas
• /
• v.5 no.4 s.16
• /
• pp.49-55
• /
• 2001

This paper presents the design safety analysis of the inner tank structure, which is manufactured by 9 percent nickel steel sheets in the full containment type LNG storage tank. The FEM computed results indicate that top girder and several stiffener rings of the inner tank play an important role for controlling the deformation and stress intensity of the inner tank structure. The hydrostatic pressure due to cryogenic fluids gave more influential to the deformation of the inner tank wall compared with that of a cryogenic temperature of $-162^{\circ}C$. But, the deformation and stress of the inner tank. which is produced by the buckling loads, are very small because the external load is not applied to the top of the inner tank. This indicates the role of top girder and stiffener rings of the inner tank model is not important in full containment LNG storage tank.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.6
• /
• pp.501-505
• /
• 1998

Conditions for high frequency plant regeneration from cryopreserved embryogenic cell suspension cultures derived from hypocotyl explants of cucumber (Cucumis sativus L.) are described. Cells cryoprotected with a mixture of 2 M DMSO and 0.4 M sucrose exhibited a regeneration frequency of 85%. However, cells cryoprotected with different concentrations of glycerol showed no regeneration after cryopreservation. Pretreatment of cells in a high osmotic medium was not necessary to the process. Upon transfer to MS medium supplemented with 1 mg/L 2,4-dichlorophenoxyacetic acid, regenerated calli gave rise to numerous somatic embryos, then underwent development into plantlets.

• Journal of Plant Biotechnology
• /
• v.30 no.1
• /
• pp.109-113
• /
• 2003

Cryopreservation of embryogenic callus derived from apical meristem culture was attempted by slow prefreezing method (two-step method) with various cryoprotectants in sweetpotato cv. 'Yulmi' Precultured embryogenic calli on medium containing 10 mg/L ABA prior to slow prefreezing in liquid nitrogen indicated higher survival rate than 1.0 mg/L ABA preteatment. The cryoprotectant comprising 1.28 M DMSO in 0.4 M sucrose solution gave the best survival (over 46%) of sweetpotato cells exposed to liquid nitrogen as determined by TTC reduction and FDA staining method. Cryopreserved calli cultured on MS medium with 1.0 mg/L 2,4-D were grown for 4 weeks in the dark and induced embryos after another 4 weeks. They were subcultured on MS medium supplemented with 0.1 mg/L 2,4-D＋0.1 mg/L kinetin for 2 weeks and regenerated into normal plantlets in MS basal medium.