• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.147-154
• /
• 2019

In this study, poly(ethylene terephthalate)(PET) fibres dyed with Disperse Red 167 using supercritical $CO_2$ technology. The purpose of this study was to investigate relationship between PET fibers and supercritical $CO_2$ during dyeing. The effects of temperature, pressure, dyeing time and mass ratio between the dye and PET in the dyeing chamber were considered. Thermal and mechanical properties of the fibers were investigated. Tensile strength of dyed PET fibers decreased at higher temperature and pressure conditions. DSC and DMA results indicated that the Tg and Tm values decreased significantly when compared to the pure PET fibers. However, uniformly dyed PET fibers were typically observed.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.41-46
• /
• 2017

This study aims to select suitable co-solvents and to obtain optimal process conditions in order to improve process efficiency and productivity through experimental results obtained under various experimental conditions for the etching and rinsing process using liquid carbon dioxide and supercritical carbon dioxide. Acetone was confirmed to be effective through basic experiments and used as the etching solution for MEMS-wafer etching in this study. In the case of using liquid carbon dioxide as the solvent and acetone as the etching solution, these two components were not mixed well and showed a phase separation. Liquid carbon dioxide in the lower layer interfered with contact between acetone and Mems-wafer during etching, and the results after rinsing and drying were not good. Based on the results obtained under various experimental conditions, the optimum process for treating MEMS-wafer using supercritical CO2 as the solvent, acetone as the etching solution, and methanol as the rinsing solution was set up, and MEMS-wafer without stiction can be obtained by continuous etching, rinsing and drying process. In addition, the amount of the etching solution (acetone) and the cleaning liquid (methanol) compared to the initial experimental values can be greatly reduced through optimization of process conditions.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.14-24
• /
• 2019

In this study, dyeability of PET fabric was investigated depending on dyeing temperature, pressure, and leveling time using laboratory scale supercritical $CO_2(scCO_2)$ dyeing machine. Dyeing temperature, pressure, leveling time were varied from 100, 120, $130^{\circ}C$, 150, 200, 250bar, 40, 60, 80, 100min, respectively. It is proved that the higher temperature of $scCO_2$ dyeing process, the higher K/S value and the lower $L^*$ value, which in turn means the lower amount of dyeing molecules remained after process done. Compared 200bar with 250bar of dyeing pressure, $scCO_2$ dyeing fabrics under 250bar appeared to have a lower $L^*$ value, a higher K/S value than those from 200bar, meaning that dyeing color turns to darker with higher dyeing pressure. The experiments showed that the most ideal condition for $scCO_2$ dyeing process is $120^{\circ}C$, 250bar for 60 - 100min of leveling time.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.21-27
• /
• 2019

Lifetime of Si photovoltaics modules are about 25 years and a large amount of waste modules are expected to be discharged in the near future. Therefore, the extraction and collection of valuable metals out of discharged Si modules will be one of the important technologies. In this study, we demonstrated that supercritical $CO_2$ extraction method can be effectively used to remove Cu, one of the abundant elements in the module, as well as its oxide form, $Cu_2O$. Especially, we proved that the addition of hexane as co-solvent is effective for the removal of both materials. The optimal ratio of $CO_2$ and hexane was 4:1 at a fixed temperature and pressure of $250^{\circ}C$ and 250 bar, respectively. In addition, it was proven that the removal of $Cu_2O$ was preceded via reduction of $Cu_2O$ to Cu.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.208-216
• /
• 2020

In this study, C.I. Disperse Red 60 (DR60), C.I. Disperse Yellow 54 (DY54) dyes were used to investigate the washing fastness characteristics of PET fibers according to supercritical CO2 and aqueous dyeing process. The changes in K/S values and L⁎ values before and after washing of dyed PET fibers were observed according to the KS K ISO 105 washing fastness measurement method. In addition, it was confirmed by changing the ΔE⁎ and ΔL⁎ values of control PET fibers. Overall, it was confirmed that both the supercritical CO2 and aqueous dyeing process had excellent washing fastness ratings of 4-5 for DR60 and DY54 dyes. Comparatively, the K/S and L⁎ values for before and after washing of PET fibers with supercritical CO2 dyeing process was higher than that of the aqueous dyeing process and the ΔE⁎ and ΔL⁎ values of the control PET fibers were low. From the results, we observed that the supercritical CO2 dyeing process of PET fibers has better washing fastness characteristics than the aqueous dyeing process.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.69-76
• /
• 2021

Printed circuit heat exchanger (PCHE) is a compact heat exchanger with good heat transfer performance, high structure integrity, and reliability over a wide range of temperatures and pressures. Instead of the traditional zigzag and straight shape channel, the sinusoidal shape channel was adopted in this study to investigate the relation of thermal-hydraulic performance and waviness factors (period and amplitude). The local flow characteristics and the heat flux distribution were compared to verify the effects of period and amplitude on heat transfer performance. As the period of channel becomes shorter, the rapid change of the flow direction can produce high flow separation around the corner leading to the disturbance of the boundary layer opposite wall. The nonuniform distribution of flow velocity appeared around the corner positions can promote fluid mixing and lead to higher thermal performance. An evaluation index was used to compare the comprehensive performance of PCHE considering the Nusselt number and Fanning factor. Based on the simulation results, the optimal design parameters of PCHE channel shape were found that the channel with an equivalent bending angle of 15° offers the highest heat flux capacity.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.159-166
• /
• 1999

티타니아가 첨가된 불투명한 실리카 에어로겔의 물성 및 열처리에 따른 미세구조 변화가 연구되었다. 부분가수 분해된 TEOS-이소프로판을 용액에 titanium isopropoxide를 첨가한후 겔화시킨 습윤겔을 초임계건조(25$0^{\circ}C$, 1250 psig)하여 모노리스 타입 에어로겔을 합성하였으며, SiO2-10 mol% TiO2 에어로겔의 밀도와 기공율은 각각 0.23 g/㎤와 90% 이었다. 초임계건조시 티타늄의 함량이 증가함에 따라 수축율이 증가할 뿐만 아니라 티타니아는 anatase 상으로 상전이됨과 동시에 입자 응집에 의해 100~800nm 크기의 cluster로 에어로겔 내에 균일하게 분포되었다. 불투명한 에어로겔은 8$mu extrm{m}$ 이하의 적외 영역에서 순수 실리카 에어로겔에 비하여 매우 낮은 광투과율과 $600^{\circ}C$까지 높은 미세구조 안정성을 보여주었다.

• 공학교육연구
• /
• 제13권6호
• /
• pp.72-79
• /
• 2010

공업에 관한 전문교과 이론뿐만 아니라 실습 교육을 담당하는 공업계 교사를 양성하는 공업교원양성교육은 보통교과 교원양성교육과는 차별화된 교육이 이루어질 필요가 있다. 이를 위해 공업교원양성교육에서 좋은 수업에 대한 의문을 가지고, 대학에서 공업교육양성교육의 기억이 비교적 뚜렷하고 현직 공업계 고등학교 교사로서 교직 경험이 3년 이내인 초임 교사를 대상으로 면접법을 실시하였다. 공업교원양성교육은 사범대학에서 교직과정을 이수하거나 부전공 및 복수전공을 통하여 교원자격을 취득하거나, 공과대학 등에서 교직과정을 이수하거나, 교육대학원 등에서 교사 자격증을 취득하는 세 가지 형태로 이루어지고 있어서 공업교원양성교육에서 좋은 수업을 세 가지 경우로 분류하여 분석하였다. 첫째, 사범대학에서의 좋은 수업은 공업계교사가 되어서 학교 현장에 많은 도움이 되는 실질적인 실습수업으로 나타났다. 둘째, 공과대학의 교직과정 이수에서의 좋은 수업은 소수의 교직이수자를 배려한 공학 전공 수업, 교과목에 타당한 교직과목 수업, 학교 현장에서 이루어지는 실습교육 등이 좋은 수업으로 나타났다. 셋째, 교육대학원에서의 좋은 수업이란 학부 전공이 다른 학생들의 전공을 고려한 수업, 교원임용고사에 도움이 되며 학교 현장에서 이루어지는 실질적인 실습 위주의 수업 등으로 나타났다.

• Applied Biological Chemistry
• /
• 제40권5호
• /
• pp.442-446
• /
• 1997

감도와 재현성이 높은 quinclorac 의 토양중 잔류분석방법 개발을 위해 $CO_2$를 이용한 초임계추출후 4-bromomethyl-7-methoxycoumarin 로 형광유도체화하여 HPLC 상에서 분석하는 방법을 개발하였다. 추출변수로 추출압력과 modifier인 methanol 의 함량을 변화시켜, 100 ppb 처리토양에서 7000 psi $(80^{\circ}C)$, 30% $(methanol/CO_2\;v/v)$) 조건을 이용하여 96% 의 회수율을 얻었다. 18-crown-6-ether 를 촉매로 한 형광유도체 반응은 상온에서 30분이내에 정량적으로 완결되었으며 HPLC-형광분석검출기를 이용하여 토양중 quinclorac의 최소검출 수준을 0.5 ppb까지 낮출 수 있었다. 이 방법은 기존의 방법에 비해 간편하고 감도가 높아 carboxylic acid를 함유한 농약의 잔류분석에 이용될 수 있다고 판단된다.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.135-146
• /
• 2019

A series of azo based disperse dyes were synthesized and applied to polyester(PET) fiber in supercritical carbon dioxide($ScCO_2$). Various aniline derivatives were used as diazo component and coupled with glycine ethylester or carbonic acid ethylester derivatives to give azo based disperse dyes. Depending on the various diazo substituents, absorption maxima varied from 415 to 529nm in acetone. Dyeing in $ScCO_2$ was carried out at $120^{\circ}C$ and 250bar pressure for 2hrs with 0.5% o.w.f. of dye concentration. Dyed PET fiber had excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.