• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.46-46
• /
• 2008

스텔스 기능을 가진 군사용 항공기는 레이다 망의 추적을 피하기 위해 일반 냉각수 대신에 절연유를 냉각매체로 사용한다. 그러나 절연유는 물에 비하여 열전달특성이 매우 낮기 때문에 항공기 전기전자 기기/부품 발열부를 효과적으로 냉각시키지 못하는 한계성을 가지고 있다. 따라서 본 연구에서는 나노유체(Nanofluid) 개념을 이용하여 절연유에 알루미나 및 질화알루미늄 나노분말을 미랑 분산시킨 나노절연유를 제조하고 이것의 열전달특성을 순수 절연유의 그것과 비교 평가함으로써, 냉각특성이 크게 개선된 새로운 냉매로서의 적용 가능성을 확인하고자 하였다. 다만 나노절연유를 제조함에 있어서 가장 큰 장애물은 오일에 대한 분산성 확보에 있기 때문에, 비드밀 및 초음파를 이용한 나노분말 응집체의 습식분산 및 분산제를 이용한 친유성 표면개질을 동시에 수행함으로써 장시간 안정된 분산성을 확보하도록 노력하였다. 나노유체의 열전도도 및 대류열전달계수는 비정상열선법을 이용하여 측정하였으며, 유체 속의 분말 분산 상태는 원심력을 이용한 분산안정성 평가장치 및 cryo FE-SEM을 이용하여 확인하였다. 또한 분말 형상이 대류열전달에 미치는 영향을 조사하기 위하여 알루미나 나노분말은 구상과 침상의 분말을 모두 사용하였고, 질화알루미늄 외에 다이아몬드 나노절연유도 함께 제조, 평가함으로써 냉각 및 절연특성, 그리고 물리화학적 안정성이 우수하고 실적용 가능성이 가장 높은 재료를 도출하고자 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2713-2718
• /
• 2010

To improve the CNT's dispersion, we tried to chemically modify the surface of MWNT with the butyllithium and the hexyllithium solution in sonicated reactor. The functionalized-MWNTs were characterized by Fourier transform infrared spectrometer(FT-IR) and Raman spectrophotometer. Also, we investigated the amount of alkyl moiety incorporated into MWNT's surface with Thermal gravimetric analyzer(TGA) and dispersibility in various organic solvents. Finally, we could find organic content was about 5% of the functionalized MWNT and dispersibility was enhanced in some solvents having intermediate solubility parameter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.321.1-321.1
• /
• 2013

높은 광흡수 계수를 갖는 Cu(In,Ga)Se2(CIGS) 화합물 박막 소재는 고효율 태양전지 양산을 위해 가장 전도유망한 재료이나 상대적으로 매장량이 적은 In 및 Ga을 사용한다는 소재적 한계가 있다. Cu2ZnSnSe4(CZTSe) 혹은 Cu2ZnSnS4(CZTS)와 같은 Cu-Zn-Sn-Se계 화합물 반도체는 CIGS 내 희소원소인 In과 Ga이 범용원소인 Zn 및 Sn으로 대체된 소재로써 미래형 저가 태양전지 개발을 위해 활발히 연구되고 있는데, 그 화합물 조합에 따라 0.8eV부터 1.5eV까지의 에너지 밴드갭을 갖는 것으로 알려져 있다. 본 연구에서는 열분해법으로 CZTS 나노 입자를 합성하였다. 용매로 Oleylamine을 사용하였는데, $260{\sim}340^{\circ}C$의 온도 범위에서 5시간 30분 동안 CZTS 나노입자를 합성하였고, $300^{\circ}C$에서 5시간 30분~9시간까지 합성하였다. 헥산을 이용하여 원심분리기와 초음파세척기로 용매인 Oleylamine을 제거하였고, 진공오븐에서 건조된 CZTS 분말의 FE-SEM (Field Emission Scanning Electron Microscope), XRD (X-Ray Diffraction), EDS (Energy Dispersive Spectroscopy) 분석 등을 통해 합성온도에 따른 구조적, 화학적 조성 변화를 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.233-233
• /
• 2013

유기물/무기물 나노복합체를 이용하여 제작한 비휘발성 메모리 소자는 간단한 공정과 플렉서블 기기 응용 가능성 때문에 많은 연구가 진행되고 있다. 다양한 나노입자를 포함한 고분자 박막에 대한 연구는 많이 진행되었지만, 비휘발성 메모리소자에서 CdSe/InP 나노입자를 사용한 나노복합체의 전기적 안정성과 동작 메커니즘에 대한연구는 미흡하다. 본 연구는 CdSe/InP 코어/쉘 나노입자가 poly (N-vinylcarbazole) (PVK) 박막에 분산되어 있는 나노복합체를 이용하여 메모리 소자를 제작하여 전기적 특성과 안정성을 관찰 하였다. 소자 제작을 위해PVK 고분자를 용매인 클로로벤젠에 용해한 후, 헥산에 안정화 되어있는 CdSe/InP 나노입자를 초음파 교반기를 사용하여 고르게 섞었다. Indium-tin-oxide (ITO)가 증착한 유리 기판을 화학물질로 세척한 후 기판 위에 CdSe/InP 나노입자와 절연성 고분자인 PVK가 혼합된 용액을 스핀코팅 방법으로 도포하여 나노입자가 포함된 고분자 박막층을 형성하여 저항 변화층으로 사용하였다. 형성된 박막 위에 마스크를 사용하여 Al 상부전극을 고진공에서 열 증착하여 비휘발성 메모리 소자를 제작하였다. 제작된 소자의 전류-전압(I-V) 특성을 측정한 결과 동일전압에서 전도도가 좋은 상태 (ON)와 좋지 않은 상태 (OFF)인 두 개의 상태상 존재한다는 것을 확인하였고, CdSe/InP인 나노입자가 포함된 소자와 포함되지 않은 소자의 전기적 특성을 비교 분석하였다. 두 상태의 안정성을 ON 또는OFF 상태의 스트레스를 측정하여 두 상태의 안정성을 확인하였고, 실험결과를 바탕으로 메모리 소자의 동작 메커니즘을 기술하였다.

• Journal of Surface Science and Engineering
• /
• v.51 no.4
• /
• pp.218-223
• /
• 2018

In this study, we proposed a new ultrasonic-chemical decontamination process for decontaminating radioactive corrosion products during the maintenance of reactor coolant pump (RCP). The actual decontamination process was reproduced in the laboratory. And the corrosion characteristics of stainless steel (STS), constituting the RCP interior parts, were examined. The weight-loss measurment and polarization experiment were carried out in order to determine the corrosion characteristics of STS 304 and STS 415 by repeated decontamination processes. The STS 304 presented a little corrosion damage, which was almost indistinguishable from visual observation. The weight-loss rate of STS 304 was also significantly lower. On the other hand, STS 415 showed severe corrosion damage on its surface, greater weight-loss rate and higher corrosion current density than STS 304.

• Journal of Surface Science and Engineering
• /
• v.51 no.5
• /
• pp.291-296
• /
• 2018

In this study, we carried out an ultrasonic-chemical decontamination process with immersion type, reproduced in the laboratory. The corrosion damage characteristics, depending on kind of materials and ultrasonic process time, were investigated. Inconel 600, which showed lower corrosion potential and higher corrosion current density than that of STS 316, revealed severer corrosion damage and higher weight-loss rate than STS 316. Weight-loss rate of Inconel 600 increased with increasing ultrasonic process time. On the other hands, STS 316 presented a negligibly small corrosion damage, which was almost indistinguishable from visual observation. There was no effect of ultrasonic process time on the weight-loss rate of STS 316.

• Journal of Korean Society on Water Environment
• /
• v.35 no.2
• /
• pp.115-122
• /
• 2019

The objective of this study was to investigate the sonophysical and sonochemical effects induced by acoustic cavitation in heterogeneous systemin a 28 kHz double-bath reactor using calorimetry, the aluminiumfoil erosion test, and the luminol test. With no glass beads, calorimetric power in the inner vessel increased as much as the outer sonoreactor lost and total calorimetric power was maintained for various liquid height conditions (0.5 ~ 7 cm) in the vessel. Higher calorimetric energy was obtained at higher liquid height conditions. Similar results were obtained when glass beads were placed with various beads heights (0.5 ~ 2.0 cm) and relatively high calorimetric energy was obtained in spite of large attenuation in the glass beads layer. An aluminium foil placed between the bottom of the inner vessel and the glass beads layer was damaged, indicating significant sonophysical effects. Much less damage was detected when the foil was placed above the beads layer due to large attenuation of ultrasound. Sonochemical effects, visualized by sonochemiluminescence (SCL), also decreased significantly when the beads were placed in the vessel. It was established that the optimization of the liquid height above the solid-material layer could enhance the sonophysical and sonochemical effects in the double-bath sonoreactors.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.133-137
• /
• 2023

This study the problem of deposition uniformity observed during Mist-CVD deposition experiments. The TRIZ's ADRIGE algorithm, a problem-solving technique, is utilized to systematically analyze the issue and propose solutions. Through problem and resource analysis, technical contradictions are identified regarding the precursor's volume and its path when it encounters the substrate. To resolve these contradictions, the concept of applying the principle of dimensional change to transform the precursor's three-dimensional path into a one-dimensional path is suggested. The chosen solution involves the design of an enhanced Mist-CVD system, which is evaluated for feasibility and analyzed using computational fluid dynamics. The analysis confirms that the deposition uniformity consistently follows a pattern and demonstrates an improvement in uniformity. The improved Mist-CVD equipment is validated through analysis, providing evidence of its feasibility and yielding satisfactory results.

• Journal of the Korean Society of Radiology
• /
• v.82 no.3
• /
• pp.737-742
• /
• 2021

Primary neuroendocrine carcinomas of the breast are a rare, distinct category of breast carcinomas that require immunohistochemical staining for diagnosis. Currently, there is not enough evidence on the clinical pattern, prognosis, and proper management of the disease. Only few case series have described the imaging findings of neuroendocrine carcinomas of the breast. We herein present a case of a primary neuroendocrine carcinoma of the breast (small cell) presenting as a locally aggressive tumor with metastatic disease, and describe the radiologic findings.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.293-299
• /
• 2000

Purpose :We conducted a prospective non-randomized clinical study to evaluate the efficacy and toxic of the preoperative concurrent chemoradiotherapy for locally advanced unresectable rectal cancer. Materials and Methods: Between January 1995 and June 1998, 37 conecutive patients with locally unresectable advanced rectal cancer were entered into the study. With 3- or 4- fields technique, a total of 45 Gy radiation was delivered on whole pelvis, followed by 5.4 Gy boost to the primary tumor in some cases. Chemotherapy was done at the first and fifth week of radiation with bolus i.v. 5-Fluorouracil (FU) 370$\~$450 mg/m$^{2}$, days 1$\~$5, plus Leucovorin 20 mg/m$^{2}$, days 1$\~$5. OF 37 patients, 6 patients did not receive all planned treatment course (refusal in 4, disease progression in 1, metastasis to lung in 1). Surgical resection was undergone 4$\~$6 weeks after preoperative concurrent chemoradiotherapy. Results :Complete resection rate with negative margins was 94$\%$ (29/31). Complete response was seen in 7 patients (23$\%$) clinically and 2 patients (6$\%$) pathologically. Down staging of tumor occured in 21 patients (68$\%$). Treatment related toxicity was minimal except grade III & IV leukopenia in 2 patients, respectively. Conclusion : Preoperative concurrent chemoradiotherapy in locally advanced rectal cancer was effective in inducing down staging and complete resection rate. Treatment related toxicity was minimal. Further follow up is on-going to determine long term survival following this treatment.