• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.1-8
• /
• 2012

An experimental study has been conducted to scrutinize into the influence of ultrasonic standing wave on the propagating behavior and structural stabilization of propane/air premixed flame at various equivalence ratios in half-open rectangular duct. Evolutionary features of the flame fronts are caught by high-speed images, and the variation of flame structure and local flame velocities along the propagation are analyzed. It is revealed that the propagation velocity agitated by the ultrasonic standing wave is greater than that without the agitation: the velocity enhancement diminishes as the equivalence ratio approaches the stoichiometric. Influence of standing wave on the flame overwhelms that of the buoyancy which slants the flame front towards top of the duct, and thus the standing wave contributes to the structural stabilization of propane/air premixed flame.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1257-1264
• /
• 2011

Guided ultrasonic waves propagating over long distances within a short period provide a fast long-range inspection method. However, structures with arbitrary cross-sections, such as rails, have complicated dispersion characteristics that make analysis of the ultrasonic signal difficult. Therefore, an understanding of the characteristics of the propagating waves in rails is important for the creation of a reliable and practical inspection system using guided waves. In particular, it is necessary to investigate the dispersion characteristics of the guided waves. This paper introduces a method for the calculation of the dispersion curves of KS60 rails by adopting a SAFE method, and discusses the possibility of using guided waves as a technique for rail inspection.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.187-188
• /
• 2014

초음파 전파 매개물은 초음파의 손실 없는 투과력을 위한 1차적인 목적 이외에 피부위에서 탐촉소자의 부드러운 이동을 위한 부가적인 목적이 있다. 본 연구는 제형이 다른 진단초음파 전파매개물이 갖는 피부 윤활성, 피부 보습성, 건조속도 등의 초음파 매개물의 특징을 측정하고 비교하였다. 마찰계수는 점도가 높을수록 높았으며 제제의 건조속도는 고분자 수화젤이 가장 높았다. 오일 함유량이 많을수록 수분증발이 나타나지 않았다. 피부수분함량에서는 저점도 에멀전이 높은 수분함량을 나타냈으며 수분함량 감소 정도가 가장 완만히 나타났다. 오일성분을 적절히 사용한 에멀전 형태의 초음파 전파매개물은 피부 보습효과, 피부 유연작용의 피부 건강측면과 피부-탐촉소자간의 피부 윤활성면에서 효과적인 제형임을 알 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.103-109
• /
• 2005

Fiber reinforced plastic material should be inspected in fabrication process in order to enhance quality by prevent defects such as delamination and void. Generally, ultrasonic technique is widely used to evaluate FRP. In conventional ultrasonic techniques, transducer should be contacted on FRP. However, conventional contacting method could not be applied in fabrication process and novel non-contact evaluating technique was required. Laser-based ultrasonic technique was tried to evaluate CFRP plate. Laser-based ultrasonic waves propagated on CFRP were received with various transducers such as accelerometer and AE sensor in order to evaluate the properties of waves due to the variation of frequency. Velocities of laser-based ultrasonic waves were evaluated for various fiber orientation. In addition, laser interferometry was used to receive ultrasonic wave in CFRP and frequency was analysed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.173-181
• /
• 2014

The propagation behavior and structural variation of a premixed propane/air flame with frequency change in an ultrasonic standing wave at various equivalence ratios were experimentally investigated using Schlieren photography and pressure measurement. The propagating flame was observed in high-speed Schlieren images, allowing local flame velocities of the moving front to be analyzed in detail. The study reveals that the distorted flame front and horizontal splitting in the burnt zone are due to the ultrasonic standing wave. Vertical locations of the distortion and horizontal stripes are intimately dependent on the frequency of the ultrasonic standing wave. In addition, the propagation velocity of the flame front bounded by the standing wave is greater than that of the flame front without acoustic excitation. As expected, the influence of the ultrasonic standing wave on premixed-flame propagation becomes more prominent as the frequency increases.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.238-245
• /
• 2000

유도초음파를 이용하면 배관 및 박판과 같은 파유도체에 대한 광범위한 비파괴탐상을 할 수 있게되어 시간과 경비를 절약할 수 있는 장점이 있다. 그래서 유도초음파를 이해하고 활용하기 위한 연구가 활발히 진행되고 있다. 유도초음파가 기존의 체적 초음파와 크게 다른 점은 분산성있어 초음파의 전파속도가 진동수와 파유도체의 두께에 의존한다는 것과 전파 특성이 다른 무한개의 모드가 존재한다는 것이다. 본 논문에서는 박판과 배관에서의 유도초음파를 이해하고 비파괴탐상에 적용하기 위해 필요한 모드의 분산과 선택 그리고 확인에 대해 이론적인 결과와 및 실험적인 예를 제시하여 그 개념을 소개하였다.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.324-330
• /
• 2015

When diagnostic ultrasounds are used, an ultrasonic transmission media is used to effectively transmit the ultrasonic energy. Types of ingredients of polymer hydro gel, emulsion, and oil gel were compared with commercialized products by measuring characteristics of ultrasonic transmission media such as skin lubricity, skin moisturizing, and dryness speed which were contained in each different media. The mean friction coefficient measured to investigate skin lubricity showed high in the agent containing a large amount of oil, whereas the mean friction coefficient of the low viscosity emulsion did not show a significant difference with that of the polymer hydro gel. The moisture evaporation measured to investigate the dryness speed of the agent showed highest in polymer hydro gel. This showed that the larger amount of oil it had, the less moisture evaporation occurred. For skin moisture measured to investigate moisturizing characteristics of skin, low viscosity emulsion showed high in moisture content, whereas it showed slowest reduction in moisture content. As a type of emulsion appropriately containing water and oil is superior in skin moisturizing and skin tenderness, it is expected to serve as a dosage form of new ultrasonic transmission media.

• Composites Research
• /
• v.29 no.5
• /
• pp.288-292
• /
• 2016

In this paper, a novel ultrasonic propagation imaging system, called a full-field pulse-echo ultrasonic propagation imaging (FF PE UPI) system is introduced. The system nondestructively inspected targets with two-axis translation stage. The coincident laser beams for ultrasonic sensing and generation are scanned and pulse-echo mode laser ultrasounds are captured. This procedure makes it possible to generate full-field ultrasound in through-the-thickness direction as large as the scan area. Structural inspection results in the form of full-field ultrasonic wave propagation videos are introduced, which are painted sandwich control surfaces. In addition, the inspection results of FF PE UPI system are compared with conventional ultrasonic testing methods such as waterjet and portable C-scan.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.16-23
• /
• 2013

An experimental study has been conducted to investigate the effects of equivalence ratio on the propagation characteristics of $CH_4$-air premixed flame intervened by an ultrasonic standing wave. A Schlieren photography was used for the flame structure visualization, and the flame propagation behavior was investigated in detail throughout the post-processing analysis. It is found that the structural variation of methane/air premixed flame caused by the intervention of ultrasonic standing wave give rise to the enhancement of combustion reaction and flame propagation velocity. Effectiveness of the standing wave on the flame velocity decreases as the equivalence ratio increases. Larger flame velocity with the standing wave becomes undistinguishable in a specific range of equivalence ratios.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.83-89
• /
• 1994

It is important for an ultrasonic testing to know the sound pressure field and the directivity of ultrasonic waves propagating in a solid. The directivity of ultrasonic wave is closely related to the sensitivity, the scanning pitch, the arrangement of angle probe, and the defect kind in ultrasonic testing. This paper describes on the directivity measurement of ultrasonic wave using ultrasonic wave visualization method. The directivity of the shear wave emitted from the angle probes were constant during propagation. The difference of directivity was existed between 2MHz and 4MHz angle probes. The centers of directivity were located backward from the incident poing and inside of the angle probe and were not changed during the wave propagation.