• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.502-509
• /
• 2003

After 800 students of Chonbuk National University was examined, 86 people (male : 43, female : 43, mean age : 22.2 years old) was selected as a group of normal occlusion. From their gypsum cast, this conclusion was obtained. 1. Intra-observer measurement errors in buccolingual diameter, maxillary lateral incisors have somewhat bigger errors. In mesiodistal diameter, maxillary first molars and maxillary second molar have bigger numerical value. Mean errors of measurement are 0.051mm at buccolingual diameter of crown and 0.083mm at mesiodistal diameter. 2. Fluctuating asymmetry is 0.030 average in buccolingual diameter, and 0.037 average in mesiodistal diameter. Statistically there are no big differences. 3. Male has longer buccolingual diameter than female in every permanent teeth. Teeth which have statistical difference in buccolingual diameter are maxillary lateral incisor, maxillary canine, maxillary second molar, mandibular central incisor, mandibular canine, mandibular second premolar, and mandibular first molar. In mesiodistal diameter maxillary central incisor, maxillary canine, and mandibular first molar have statistically difference. 4. Tooth which has the biggest difference depending on gender is maxillary lateral incisor in buccolingual diameter and mandibular canine in mesiodistal diameter. 5. Both sexes have similar crown index. Male has bigger value of crown module measurement and crown area measurement in every tooth. Crown area considered as size of tooth from occlusal surface was bigger in male than in female statistically except some teeth, maxillary first premolar, mandibular lateral incisor, first premolar and second premolar.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.1
• /
• pp.32-38
• /
• 2018

Purpose: The purpose of present study was to retrospectively analyze the survival rate of narrow diameter implant less than 3.6 mm by initial stability and radiographic measurements. Materials and Methods: In total, 24 patients who received 38 narrow diameter implants (${\leq}3.6mm$ in diameter, ${\geq}7mm$ in length) were enrolled in this retrospective study. The cumulative survival rate was calculated and various factors were investigated according to the implant platform diameter, body diameter, length, position, concomitant use of guided bone regeneration in implant placement and final prosthesis type. Initial stability was investigated with implant stability quotient (ISQ) value. The mesial and distal marginal bone level (MBL) change was calculated with radiography. Results: The overall survival rate was 92.11%. Mean ISQ value and MBL change of survival implants was 66.26 and $0.14{\pm}0.31mm$, respectively. None of the implants with platform diameters larger than the body diameter failed. Conclusion: In conclusion, the findings of present study suggest that narrow diameter implant could be predictable treatment in narrow alveolar ridge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.33-37
• /
• 2010

본 연구는 암거흐름 8형식 중 Class-II군 즉, 암거 유입부가 잠수된 조건하에서 저류지 방류암거의 흐름 특성을 분석한 것으로서 유입부 수위가 저류지의 제방고를 넘지 않는 범위에서 저류지 방류암거 설계인자들의 관계를 분석하여 설계범위를 결정해 본 결과 암거의 직경과 유출부 초기수위의 변동은 유입부 수위의 변동에 큰 영향을 주었으며, 상대적으로 암거의 경사와 연장은 그 영향이 미미하였다. 또한 암거 흐름분류가 Class-II군 Type-2에 속하는 경우에는 암거 직경이 일정하여도 유입부의 수위가 변동되지 않으면서 적정 유출량을 방류시킬 수 있었으며, 암거 흐름분류가 Class-II군Type-3에 속하는 경우에는 유출부 수위변화에 따라 암거직경변화가 크게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.93-101
• /
• 2008

Bearing strength test was investigated to determine the bearing properties of domestic larix glulam according to the load direction (in parallel to grain and in perpendicular to grain), the fastener (bolt and drift-pin), and the direction of laminae. The specimen was 5 ply glulam. The diameters of fastener are 12, 16 and 20 mm. The results were as follows. 1) In according to the diameter of bolt and drift-pin, the average of maximum bearing strength in parallel to grain loading was similar to that in perpendicular to grain loading. The average of maximum bearing strength was 1.50~2.31 times higher in parallel to grain loading than in perpendicular to grain loading. The average of maximum bearing strength in parallel to grain loading was lowered by 20% with increasing the diameter from 16 mm to 20 mm, but that in perpendicular to grain loading didn't show a clear tendency. 2) The average of bearing stiffness in parallel to grain loading was the highest at 16 mm in diameter. The average of bearing stiffness is similar to the shearing stiffness in drift-pin connection with increasing diameter. 3) In parallel to grain loading, the failure mode of specimens was the splitting along the grain in decreasing diameter. The failure mode in perpendicular to grain loading was the splitting along the grain. In this case, split occured more in specimens using bolt than in those using drift-pin. 4) The 5% offset yield strength in parallel to grain loading was similar to the predicted bearing strength of KBCS, NDS. In perpendicular to grain loading, the NDS's equation can be applied to predict the bearing strength.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.87-90
• /
• 2003

It has been well known that the major feature of compressible flow fields might be different depending on their formation processes. The objectives of the present study is to investigates the effect of jet development on the time history of supersonic jet flow field, accompanying nonequilibrium condensation. Especially, the behaviors of Mach disk diameter and location in a supersonic moist air jet are presented in terms of nozzle pressure ratio and initial relative humidity. The relative humidity of moist air is controlled at the nozzle supply, and the nozzle pressure ratio is varied to obtain the moderately underexpanded flows at the exit of the nozzle, installed in an indraft wind tunnel. It is found that at the same pressure ratio the Mach disk diameter increases with the initial relative humidity, while moves further upstream. Furthermore, the values of Mach disk diameter and location for increasing pressure ratio show larger than those for increasing.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.68.1-68.1
• /
• 2012

CIBER 2(Cosmic Infrared Background ExpeRiment 2)는 CIBER1의 후속과제로 진행되는 사업으로써 적외선 기기를 NASA Sounding Rocket에 탑재하여 0.5-2.1${\mu}m$ 파장대의 적외선 우주배경복사를 관측하고 실험하는 과제이다. CIBER 2는 NASA에서 공식 승인되어 진행되고 있는 사업이며, 미국의 Caltech, 한국의 KASI, 일본의 ISAS/JAXA가 국제협력으로 진행하는 과제이다. 한국의 KASI는 반사경의 광학계 및 광기계부 개발, 전자부 개발에 참여하고 있다. CIBER 2의 광학계는 카세그레인 방식으로써 주경의 직경은 300mm이다. CIBER 2는 77K로 냉각되어 적외선우주배경복사를 관측하기 때문에 특히, 열수축에 의한 영향을 고려하여 설계, 제작, 조립이 되어야 한다. 또한, 광학계 구조물이 조립되는 로켓의 내경이 400mm이기 때문에 광학계 구조물의 직경에 제한이 따른다. 본 발표에서는 KASI가 주도적으로 개발 중인 반사경 마운트와 광학계 구조물의 초기설계와 광기계 해석결과들에 대해서 논한다.

• The Korean Journal of Zoology
• /
• v.20 no.2
• /
• pp.77-92
• /
• 1977

A study has been made to correlate morphological and biochemical differentiation in the oocytes of a tubiculous polychaete, Schizobranchia insignis. The pressent paper is concerned with an examination of the cytological changes during oogenesis and annual size distribution of oocytes, The oocytes are released from the ovary into the coelomic sac at the end of the oogonial division and grow to a maximum size (180 $\\mu$ diameter). Oogensis takes place continuously throughout a year, although the breeding season is the period between January and March. When the oocytes reach the largest size class, they remain constant in size thereafter and accumulate in the coelomic sac. The nucleolus, which first appears in the oocytes 5-10$\\mu$ diameter, grows in the early stages of oogenesis, becomes maximum in the oocytes 100-120$\\mu$ diameter, and is constant throughout the rest of the pertiod. The nuclelus initially has a single comartment but becomes bipartite prior to vitello genesis. Three types of yolk including lipid droplets, proteid granules and oval granules oof unknown composition form at different times of oogenesis. The lipid droplets and oval granules appear in the early stage, but mainly in the oocytes larger than 80 $\\mu$ diameter. Proteid yolk and cortical granules appear only in the oocytes larger than 80 $\\mu$ diameter Microvilli are abundant in the oocyte 80 $\\mu$ diameter and embedded in the vitelline membranc. In the oocytes 180 $\\mu$ diameter they have retracted from the vitelline membrane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.75-75
• /
• 2010

단일벽 탄소나노튜브(SWNT)는 뛰어난 물리적 성질과 화학적 안정성을 가지고 있어서 다양한 분야의 응용이 기대되어 폭넓은 연구가 진행 되고 있다. 특히 SWNT의 전기적 및 기계적 특성들은 SWNT의 직경 및 뒤틀림도(chirality)에 의해 크게 좌우되기 때문에, 합성하는 단계에서 직경 또는 chirality를 제어에 관한 많은 이론적 연구가 진행되어 왔으며, 최근에는 초기 SWNT의 핵생성 단계에서의 촉매의 거동 및 상호 연관성 등에 관한 실험적인 연구결과들이 속속 보고되고 있는 실정이다. 하지만, 아직도 이에 관한 더욱 다양하고 활발한 연구 접근 및 결과들이 필요한 시점이다. 상기 배경을 바탕으로 본 연구에서는 균일한 직경을 갖는 SWNT의 합성을 위한 기초연구로서 SWNT의 직경과 촉매나노입자의 크기의 상호 연관성에 대해 체계적으로 조사하였다. 우선 SWNT합성을 위한 촉매나노입자를 얻기 위해 페리틴(ferritin)용액의 농도 및 스핀코팅 조건을 변화시킴으로써 기판 위에 분산농도를 제어한 후, 대기 열처리를 통하여 촉매나노입자의 농도를 제어하였다. 나노입자의 평균직경은 4 nm 정도로 비교적 균일하였으며, 고농도의 촉매입자는 SWNT의 다발화(bundling)를 유발하였다. 따라서, SWNT와 나노입자 직경의 상호연관성을 조사하기 위해서는 단분산(monodispersed) 된 나노입자를 이용하였으며, 아르곤 분위기에서 추가적으로 고온($900^{\circ}C$) 열처리를 실시함으로써 나노입자의 크기감소를 도모하였다. 실험결과, 열처리 시간의 증가에 따라 입자크기가 감소함을 확인하였으며, 이는 나노입자의 증발에 의한 것으로 예상된다. 다음으로는 열처리를 통하여 직경이 제어된 나노입자를 이용하여 SWNT를 합성한 후 SWNT와 촉매크기 사이의 크기 관계를 조사하였다. SWNT의 합성은 메탄을 원료가스로 열화학증기증착법을 이용하였고, 합성기판으로는 산화실리콘웨이퍼와 퀄츠기판을 이용하였다. 성장한 SWNT의 직경은 AFM을 이용하여 측정하였으며, 퀄츠기판에 수평배향 성장시킨 SWNT를 3차원 구조의 기판으로 전사(transfer)하여, 라만분석이 용이하도록 하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.389-395
• /
• 2017

This study was performed to provide the information of the soot formation behavior of octane single fuel droplet under the identical combustion conditions. To achieve this, this experimental study provide the results of the soot formation characteristics of octane droplet in accordance with different initial droplet diameter($d_0$), at the same time, experiment was conducted under the same combustion conditions which are 1.0atm of ambient pressure($P_{amb}$), 21% of oxygen concentration($O_2$) and 79% of nitrogen concentration($N_2$). Visualization of octane droplet combustion was performed by visualization system with high speed camera. The results of maximum soot volume fraction($f_{vmax}$) was almost the same under the equivalent ambient conditions regardless of initial droplet diameter. Furthermore, maximum soot volume fraction was showed the higher value in the measuring direction between $135^{\circ}$ and $315^{\circ}$ since the soot-tail is generated during two opposing igniters movement process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.5
• /
• pp.385-390
• /
• 2015

The flow characteristics in micro shock tube are investigated experimentally. Studies were carried out using a stainless steel micro shock tube. Shock and expansion wave was measured using 8 pressure sensors. The initial pressure ratio was varied from 4.3 to 30.5, and the diameter of tube was also changed from 3mm to 6mm. Diaphragm conditions were varied using two types of diaphragms. The results obtained show that the shock strength in the tube becomes stronger for an increase in the initial pressure ratio and diameter of tube. For the thinner diaphragm, the highest shock strength was found among varied diaphragm condition. Shock attenuation was highly influenced by the diameter of tube.