• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.491-498
• /
• 2019

This study analyzed how the accuracy of co-registration varies depending on the convergence angles between two KOMPSAT-3·3A images. Most very-high-resolution satellite images provide initial coordinate information through metadata. Since the search area for performing image co-registration can be reduced by using the initial coordinate information, in this study, the mutual information method showing high matching reliability in the small search area is used. Initial coarse co-registration was performed by using multi-spectral images with relatively low resolution, and precise fine co-registration was conducted centering on the region of interest of the panchromatic image for more accurate co-registration performance. The experiment was conducted by 120 combination of 16 KOMPSAT-3·3A 1G images taken in Daejeon area. Experimental results show that a correlation coefficient between the convergence angles and fine co-registration errors was 0.59. In particular, we have shown the larger the convergence angle, the lower the accuracy of co-registration performance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.659-669
• /
• 2007

The purpose of this study was to investigate the degradation of silk fabrics dyed with gardenia and sappanwood by Ultraviolet Light(UV). To asses the effect of uv on dyed silk fabrics, physical and chemical properties of samples were explored. K/S value rapidly decreased with increasing exposure time. Mordanting improved ultraviolet-cut ability and the sappanwood dyed samples were superior to those of gardenia dyed in ultraviolet-cut ability. Color progressively faded away as uv exposure time increased, accordingly, $L^*,\;a^*,\;b^*$, H/VC, ${\Delta}E$ were changed. Morphological change observed with SEM represented degradation of silk fabrics from the outer fibril to the inner fibril. Tensile Strength abruptly decreased as uv exposure time increased and the mordanted samples showed higher tensile strength than the unmordanted. FT-IR analysis confirmed that main peaks at 3297 and $1704cm^{-1}$ band for silk fabric were due to N-H and C=O stretching, gardenia peaks at 1654 and $668cm^{-1}$ band representing C=O(ester), C=C(alken) and O-C=O(carboxylic acids) of crocin and sappanwood peaks at $1715cm^{-1}$ band representing C=O(cyclic keton) of brazilin appeared on the samples exposed for 14 days, but these peaks indicating colorants after 28 days of uv exposure faded away due to prolonged exposure of uv.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.622-627
• /
• 2009

The objectives of this study were to evaluate a protease suitable for the enzymatic hydrolysis of a snow crab processing by-product (SPB) and to optimize the hydrolysis conditions using response surface methodology (RSM). The SPB was hydrolyzed at $50^{\circ}C$ and pH 7.0-7.2 to obtain various degree of hydrolysis (DH) using Flavourzyme at an enzyme/substrate (E/S) ratio of 3.0%. The reaction progress curve exhibited an initial fast reaction rate followed by a slowing of the rate. The DH was increased to 30% at 90 min with a final DH 32 to 36%. A central composite experimental design having three independent variables (reaction temperature, reaction time, and E/S ratio) with five levels was used to optimize the enzymatic hydrolysis conditions. Based on the DH data, the optimum reaction conditions for the enzymatic hydrolysis of the SPB were a temperature of $51.8^{\circ}C$, reaction time of 4 hr 45 min, and an E/S ratio of 3.8%. It was demonstrated that the enzymatic hydrolysate of SPB could be used as a flavoring agent or a source of precursors for the production of reaction flavors.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.473-481
• /
• 2005

In this paper, we propose an image segmentation method preserving object's boundaries by using the number of quantized colors and merging regions using adaptive threshold values. First of all, the proposed method quantizes an original image by a vector quantization and the number of quantized colors is determined differently using PSNR each image. We obtain initial regions from the quantized image, merge initial regions in CIE Lab color space and RGB color space step by step and segment the image into semantic regions. In each merging step, we use color distance between adjacent regions as similarity-measure. Threshold values for region-merging are determined adaptively according to the global mean of the color difference between the original image and its split-regions and the mean of those variations. Also, if the segmented image of RGB color space doesn't split into semantic objects, we merge the image again in the CIE Lab color space as post-processing. Whether the post-processing is done is determined by using the color distance between initial regions of the image and the segmented image of RGB color space. Experiment results show that the proposed method splits an original image into main objects and boundaries of the segmented image are preserved. Also, the proposed method provides better results for objective measure than the conventional method.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• Development and Reproduction
• /
• v.9 no.1
• /
• pp.23-31
• /
• 2005

Vitellogenesis during oogenesis, reproductive cycle and first sexual maturity of the female Neptunea (Barbitonia) arthritica cumingii was investigated by light and electron microscope observations. In the early vitellogenic oocyte, the Golgi complex and mitochondria were involved in the formation of lipid droplets and yolk granules. In late vitellogenic oocytes, the rough endoplasmic reticulum and multivesicular bodies were involved in the formation of proteid yolk granules in the cytoplasm. A mature yolk granule was composed of three components: main body(central core), superficial layer, and the limiting membrane. The spawning season was between May and August and the main spawning occurred between June and July when the seawater temperature rose to approximately $18{\sim}23^{\circ}C$. The female reproductive cycle can be classified into five successive stages: early active stage(September to October), late active stage(November to February), ripe stage(February to June), partially spawned stage(May to August), and recovery stage(June to August). The rate of individuals reaching the first sexual maturity was 53.1% in females of 51.0 to 60.9mm in shell height, and 100% in those over 61.0mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.260-267
• /
• 2018

Surface electromyography (sEMG) is mainly used as an on/off switch in the early stage of the study and was then expanded to navigational control of powered-wheelchairs and recognition of sign language or finger gestures. There are difficulties in communication between people who know and do not know sign language; therefore, many efforts have been made to recognize sign language or finger gestures. Recently, use of sEMG signals to recognize sign language signals have been investigated; however, most studies of this topic conducted to date have focused on Chinese finger number gestures. Since sign language and finger gestures vary among regions, Korean- and Chinese-finger number gestures differ from each other. Accordingly, the recognition performance of Korean finger number gestures based on sEMG signals can be severely degraded if the same muscles are specified as for Chinese finger number gestures. However, few studies of Korean finger number gestures based on sEMG signals have been conducted. Thus, this study was conducted to identify potential forearm muscles from which to collect sEMG signals for Korean finger number gestures. To accomplish this, six Korean finger number gestures from number zero to five were investigated to determine the usefulness of the proposed muscles and electrode placements by showing that CNN technique based on sEMG signal after sufficient learning recognizes six Korean finger number gestures in accuracy of 100%.

• Journal of the Korean Regional Science Association
• /
• v.34 no.3
• /
• pp.3-11
• /
• 2018

Urban regeneration is a worldwide challenging project, showing a great interest in the sector. In order for Korea's urban regeneration to be settled successfully in the early stage, it is necessary to analyze and review the opinions and business performance of the urban regeneration areas. The purpose of this study is to evaluate the urban regeneration planning factors affecting urban regeneration on the satisfaction of citizens, public administration and region. This study surveyed the residents and experts of the Yeongju city, Gyeongsangbuk-do, where urban regeneration is actively doing with active participation of residents and local government. Based on the data of the survey, this paper performed frequency analysis, correlation analysis and multiple regression analysis as a analytic methods. The results revealed that 'community factor' was the most important factor to the satisfaction of residents in the urban regeneration project in progress. In the final stage(at present), both 'community factor' (0.387) and 'physical factor'(0.454) were found to have a significant effect on satisfaction. While the satisfaction from 'the economic factor'(0.111) has slowed but it has increased with 'the physical factors' in the process of regeneration project, 'the social factors'(-0.007) shows a downward trend. If the role of social factors and community factors are supported at the beginning step of the urban regeneration project, the physical factors and economic factors are continued to lead a sustainable urban regeneration in the long term.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.3
• /
• pp.444-467
• /
• 2015

Government has accounted an R&D investment on drug development for the highest share among biotechnology sector. Since competitive investments between each agencies, issues on efficiency or effectiveness of the duplicate investments have been raised continuously. In this research, we investigated the effectiveness of the investment through analysis of portfolio on drug development R&D, journals, patents, and performance of the each process. As a result, reliable technology for current market demands could not compute productive outcome at the early process of the development. On the other hand, grants which support non-clinical process of the development has produced the high-quality patents for active utilization. Moreover, analysis of the performance of the process, which affects rate of success on the drug development, showed decreased efficiency compared to global average. Therefore, we proposed the strategies of reflecting the market demands and bridging between stages without interruption for maximizing the efficiency and effectiveness on investment of drug development R&D. Furthermore, strategies for concentrated support on each process should be prepared for the success of final drug development.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2207-2211
• /
• 2008

한반도 및 동아시아의 여름철은 장마와 태풍으로 인한 집중호우의 발생으로 많은 피해를 입는다. 따라서 여름철에 나타나는 이러한 집중호우가 나타나는 지역, 시기, 기간, 그리고 강수량 등을 예측하는 것은 매우 중요하다. 특히, 효율적인 수자원 관리를 위하여 이러한 예측은 매우 중요한데, 단기적으로 정확하고 신속하게 강수를 예측하는 것도 중요하지만, 장기적으로 계절 강수, 특히 여름철의 장마 또는 우기의 시기와 강수량과 태풍 발생의 시기 등을 미리 예측하여 이에 따른 집중 호우의 발생 지역, 기간, 강수량을 예측하여 사전에 대비하는 것도 매우 중요하다. 특히, 최근에는 6,7월 장마에 의한 집중 호우의 영향보다도 8월에 강수량이 높아지고 있는 경향을 보이므로 강수량의 장기적 경향의 파악이 매우 중요하다. 장기 기후를 예측하는 데는 과거 자료를 이용한 통계 방법도 유용하지만 최근에는 AOGCM (Atmospheric Oceanic General Circulation Model)을 이용한 연구가 활발하게 이루어지고 있다. 하지만 강수와 같이 지역적으로 나타나는 현상은 저해상도의 AOGCM으로는 유용한 정보를 제공하기가 어려움이 따른다. 따라서 본 연구에서는 전구를 삼각형으로 된 20면체로 격자화 시켜 모든 격자의 크기가 거의 동일하고, 해상도 조절이 가능한 Geodesic 격자를 활용한 GME 모델을 사용하였다. GME 모델은 icosahedral-hexagonal grid 격자 체계를 가진 독일 기상청(Deutscher Wetterdient)에서 현업으로 사용 중인 모델이다. 본 연구에서는 수직/수평 해상도를 40km/40layers로 하여 GME 모델을 수행하였으며, 일간격의 장기 기후 자료를 생산하였다. 사용된 초기자료로는 ECMWF (European Centre for Medium Range Weather Forecasts) 자료이며, 경계 자료로는 ERA Climatology의 최근 30년간의 SST (Sea Surface Temperature) 평균 자료를 이용하여 규준 실험(Control Run), 즉, climatology 자료를 생산하였으며, persistent SST 아노말리와 ERA Climatology의 최근 30년간의 SST 자료를 이용하여 내삽 과정을 거친 SST forcing을 주어서 예측 실험(Prediction Run)을 통하여 모의 자료를 생산하였다. 특히, 규준 실험에서는 수치 모델이 가지는 불확실성을 줄이고 예보 정확도를 향상시키기 위하여 각각의 실험은 초기자료를 달리한 앙상블 모의실험을 수행하였다. 장기 모의 3개월을 위하여 모의 기간 1달 전부터 모의를 수행하여, 첫 1달은 모델의 spin-up 시간으로 분석에서 제외 하였다. 생산된 Climatology 자료와 Prediction 자료를 비교하여 아노말리와 Category 분석을 실시하여 한반도 및 동아시아 지역의 강수(Precipitation)를 중심으로 기압장(Pressure), 온도(2m Temperature) 위주로 분석하였다. 이러한 예측된 매 계절의 전망 자료 중에서도 수자원 분야에서 관심이 집중되는 여름철에 초점을 맞추어 실제 관측 자료와 비교하여 GME 모델의 계절 모의 예측성 성능을 분석하여 평가하고 다가올 여름철의 강수량의 장기 변화를 모의하고자 하였다.