• 한국가스학회:학술대회논문집
• /
• 2003.10a
• /
• pp.120-125
• /
• 2003

본 연구는 원자력 발전소에 있는 방화벽의 케이블 관통부위에 설치된 CPFS(Cable Penetration Fire Stop)시스템 안에서 일어나는 동적열전달 현상을 3 차원으로 나타낼 수 있는 시험시뮬레이터에 사용될 수학적 모델과 수치계산 알고리즘의 개발에 관한 것이다. CPFS 내에서 일어나는 열전도 현상을 나타내는 지배방정식은 주어진 조건들 하에서 포물선형 편미분방정식(Parabolic PDE)으로 나타난다. 문제를 단순화하기 위해 열의 흐름을 두 성분으로 나누었다 즉, 케이블과 평행한 선을 따라서 일어나는 열전도와 벽면과 평행한 평면 위에서 일어나는 열전도로 나누었다. 먼저 선을 따라 일어나는 동적 열전도 현상을 나타내는 PDE를 연속과완화(SOR: Successive Over-Relaxation)를 적용하여 유한한 불연속점들에 대한 연립 상미분방정식(ODE)으로 전환했고, 그 연립방정식은 ODE Solver 를 이용하여 풀 수 있었다. 둘째로, 각 불연속 점에 위치한 평면 위에서 일어나는 열전도를 계산하기 위해서, 유한요소의 합을 근사식으로 이용하여 PDE를 ODE로 전환해서 계산하는 유한요소법(Finite Element Method)이 이용된다. 여기서 시간과 공간의 함수 T(x, y, z, t)인 온도는 각 선의 점들과 각 평면의 요소들에 대해서 일정한 시간간격으로 초기온도와 경계온도를 업데이트하여 계산을 반복한다. 이러한 일련의 계산결과를 바탕으로 CPFS 시스템 내에서의 온도분포의 동적인 변화를 해석한다. 결론적으로 관통하는 케이블이 CPFS 시스템의 온도분포에 매우 중요한 역할을 한다는 것을 알 수 있다. 시뮬레이션 결과는 CPFS 내의 온도분포를 쉽게 이해할 수 있도록 3 차원 그래픽으로 나타냈으며, 상용소프트웨어 FEMLAB 으로 계산한 결과와 비교해서 개발된 모델과 계산 알고리즘의 정당성을 보였다. 맞이하고 있음을 볼 수 있다. 국내광업이 21C 급변하는 산업환경에 적응하여 생존하기 위해서는 각종 첨단산업에서 요구하는 소량 다품종의 원료광물을 적기에 공급 할 수 있는 전문화된 기술력을 하루속히 확보해야 하며, 이를 위해 고품위의 원료광물 확보를 위한 탐사 및 개발을 적극 추진하고 가공기술의 선진화를 위해 선진국과의 기술제휴 등 자원산업 글로벌화 정책이 절실히 요구되고 있음을 알 수 있다. 또한 삶의 질을 향상시키려는 현대인의 가치관에 부합하기 위해서는 각종 소비제품의 원료를 제공하는 광업의 본래 목적 이외에도 자연환경 훼손을 최소화하며 개발 할 수밖에 없는 구조적인 어려움에 직면할 수밖에 없다. 이처럼 국내광업이 안고 있는 여러 가지 난제들을 극복하기 위해서는 업계와 정부가 합심하여 국내광업 육성의 중요성을 재인식하고 새로운 마음가짐으로 관련 정책을 수립 일관성 있게 추진해 나가야 할 것으로 보인다.의 연구 결과를 요약하면 다음과 같다. 첫째, 브랜드 이미지와 서비스 품질과의 관계에서 브랜드이미지는 서비스 품질의 선행변수가 될 수 있음을 증명하였으며 4개 요인의 이미지 중 사풍이미지를 제외한 영업 이미지, 제품 이미지, 마케팅 이미지가 서비스 품질에 영향을 미치고 있음을 알 수 있다. 둘째, 지각된 서비스 품질과 가격 수용성과의 관계에서, 서비스 품질은 최소 가격에 신뢰서비스 요인에서 정의 영향을 미치고 있으나 부가서비스, 환경서비스에서는 역의 영향을 미침을 알수 있고, 최대 가격에 있어서는 욕구서비스 요인은 정의 영향을 미치지만 부가서비스의 경우에는 역의 영향을 미치고 있음을 알 수 있다. 셋째, 서비스품질과 재 방문 의도와의 관계에 있어서 서비스품질은 재 방문 의도에 영향을 미침을 알 수 있다. 따라서 브랜드 이미지는 서비스품질의 선행변수가 될 수 있으며, 서비스품질은 가격 수용성과 재방문 의도에 영향을 미치고 있음을 알 수

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.95-103
• /
• 2015

The purpose of this study was performed to quantitatively measure the thermal conductivity of poultry slaughter waste with variation of reaction temperature for optimal design of thermal hydrolysis reactor. We continuously quantified the thermal conductivity of dehydrated sludge related to the reaction temperature. As the reaction temperature increased, the dehydrated sludge is thermally liquefied under high temperature and pressure by the thermal hydrolysis reaction. Therefore, the bond water in the sludge cells comes out as free water, which changes the dehydrated sludge from a solid phase to slurry of a liquid phase. As a result, the thermal conductivity of the its sludge was more than 2.11 times lower than that of the water at $20^{\circ}C$. However, the thermal conductivity of the sludge approached to $0.677W/m{\cdot}^{\circ}C$ of water at $200^{\circ}C$, experimentally substantiating liquefaction of the dehydrated sludge. Therefore, we confirmed that the change in physical properties due to thermal hydrolysis appears to be an important factor for heat transfer efficiency. And the thermal conductivity function related to reaction temperature was derived to give the boundary condition for the optimal design of the thermal hydrolysis reactor. The consistency of the calculated function was 99.69%.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.14-17
• /
• 1990

Seven varieties of soybeans(Paldal, Danyeob, Jangbaek, Baegun, Jangyeob and 2 cultivars of Local 1 and Local 2) were investigated to compare the sorption characteristics during storage of various relative humidities. The sorption isotherm curve determined at RH range of $33{\sim}92\;%$ and $4^{\circ}C$ and $25^{\circ}C$ showed that moisture contents of soybeans was higher at $4^{\circ}C$ than those values at $25^{\circ}C$ for overall water activities of 0.33{\sim}0.92$. The Paldal was the highest moisture content at $4^{\circ}C$ while that value of Baegun was the highest at $25^{\circ}C$. The change in moisture content with storage time was expressed by log(dw/dt)=b log(t)+log a and the value of (dw/dt)${\times}10^3$ was decreased logarithmically. The Paldal was comparatively the highest initial absorption rate and the value of -b in seven varieties decreased as the relative humidity increased from 33 % to 92 %.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.446-451
• /
• 2009

Reliability evaluations of linear low density polyethylene (LLDPE) pipe with respect of thermal exposure time have been investigated in accordance with RS M 0042, which is a reliability standard for polymer pipe. As the thermal exposure time is prolonged, a progressive increase, until 250 days, in tensile strength and a slight increase in hardness are observed, while a proportional decrease in elongation at break is showed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation as the exposure time increases. Long term hydrostatic pressure test result implies the existence of transition point from ductile to brittle fracture. Oxidation induction time (OIT) test is employed to monitor the thermo-oxidative degradation of LLDPE pipe. This result shows that after the exposure time is 250 days, the depletion of antioxidants added in LLDPE pipe occurs. An empirical equation as function of exposure time, under $100^{\circ}C$ thermal-degradation condition, is proposed to assess the remaining amount of antioxidants owing to thermo-oxidative degradation. Fourier transform infrared spectroscopy results show the increase of carbonyl (-C=O) and hydroxyl (O-H) function groups on the surface of thermally exposed LLDPE pipe. This result suggests that the hydrocarbon groups locally undergo the oxidation on the LLDPE surface due to thermal-degradation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.684-688
• /
• 2008

레이더 강우와 관련한 대부분의 연구나 실무적용이 제한을 받는 이유는 레이더 반사도 등의 원시자료를 획득하기가 어려울 뿐만 아니라 이를 처리하여 수문해석에 적용하는 과정이 간단하지 않기 때문이다. 이를 해결하기 위하여 다음과 같은 내용을 연구하였다. (1) 레이더 영상자료를 실용적으로 활용하기 위한 '레이더 영상 디지털 변환법(RAIDOM)'을 연구 개발하였다. 또한 오프라인상에서도 기상청 레이더 합성 CAPPI 이미지 자료를 디지털 강우자료로 직접 변환할 수 있는 방법을 제시하였다. 이러한 기술은 앞으로 레이더 강우 연구와 레이더 강우의 활용성을 넓히는데 크게 기여할 것으로 기대된다. (2) RAIDOM 레이더 강우와 연계한 분포형 강우유출모형을 구축하였다. 본 연구에서는 DEM, 토지피복도, 토양도로부터 분포형 강우-유출모형의 매개변수를 산정하는 방법을 상세히 연구하여 제시하였다. 이러한 연구결과는 앞으로 분포형 강우유출모형에 대한 연구와 활용성을 넓히는데 기여할 것으로 기대된다. (3) 주요 관측 레이더 호우사상을 이용하여 RAIDOM 강우와 구축된 분포형 모형의 적용성을 검증하였다. 이를 위하여 먼저 강우유출자료가 체계적으로 관리되고 있는 평창강 국제수문개발계획(IHP) 시범유역의 자료를 이용하여 모형의 매개변수 보정을 수행하였다. 강우 전 하천의 기저유량과 유역의 초기함수조건을 제외한 나머지 매개변수는 유역특성을 나타내는 인자들이므로 모든 강우사상에 대하여 일정한 것으로 가정하여 매개변수 보정을 수행하였다. 6개 주요 호우사상에 대하여 보정한 결과 4개의 호우사상에 대하여 강우-유출과정을 거의 완벽하게 재현하였으며, 2개의 호우사상에 대해서는 수문곡선의 상승과 하강은 비교적 일치하나 첨두부에서 다소차이가 발생하였다. (4) 보정된 분포형 모형을 2006년 7월에 발생한 국지성 집중호우와 한강유역 중상류지역에 걸쳐 큰 홍수량을 발생시킨 2개의 호우사상에 대하여 레이더 강우자료를 적용하여 검토하였다. 검토결과 임진강유역 3개 수위관측소와 우이천수위관측소 및 중랑교수위관측소에서 모의된 홍수수문곡선은 실측치와 잘 일치하는 것으로 나타나 본 연구에서 제시한 RAIDOM과 이를 적용한 분포형 모형이 강우유출 모의를 위하여 활용될 수 있음을 보여주었다. 앞으로 태풍에 수반된 강우와 장마전선 등을 포함한 다양한 유형의 여러 가지 강우에 대한 적용을 통하여 모형의 검증과 보완을 수행하여 RAIDOM 레이더 강우와 분포형 강우유출모형을 연계한 홍수 예보 시스템으로 발전시켜 나갈 예정이다.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.759-767
• /
• 2006

This paper presents a method to estimate the setting time of concrete using super retarding agent(SRA) and fly ash(FA) under various curing temperature conditions by applying maturity based on equivalent age. To estimate setting time, the equivalent age using apparent activation energy($E_a$) was applied. Increasing SRA content and decreasing curing temperature leads to retard initial and final set markedly. $E_a$ at the initial set and final set obtained by Arrhenius function showed differences in response to mixture type. It is estimated to be from $24{\sim}35KJ/mol$ in all mixtures, which is smaller than that of conventional mixture ranging from $30{\sim}50KJ/mol$. Based on the application of $E_a$ to Freisleben-Hansen and Pederson's equivalent age function, equivalent age is nearly constant, regardless of curing temperature and SRA contents. This implies that the concept of maturity is applicable in estimating the setting time of concrete containing SRA. A high correlation between estimated setting time and measured setting time is observed. Multi-regression model to determine appropriate dosage of SRA reflecting FA contents and equivalent age was provided. Thus, the setting time estimation method studied herein can be applicable to the concrete containing SRA and FA in construction fields.

• Journal of the Korean earth science society
• /
• v.22 no.6
• /
• pp.512-527
• /
• 2001

Separated flows passed complex geometries are modeled by discrete vortex techniques. The flows are assumed to be rotational and inviscid, and a new techlnique is described to determine the stream functions for linear shear profiles. The geometries considered are the snow cornice and the backward-facing step, whose edges allow for the separation of the flow and reattachment downstream of the recirculation regions. A point vortex has been added to the flows in order to constrain the separation points to be located at the edges, while the conformal mappings have been modified in order to smooth the sharp edges and to let the separation points free to oscillate around the points of maximum curvature. Unsteadiness is imposed to the flow by perturbing the vortex location, either by displacing the vortex from the equilibrium, or by imposing a random perturbation with zero mean to the vortex in equilibrium. The trajectories of passive scalars continuously released upwind of the separation point and trapped by the recirculating bubble are numerically integrated, and concentration time series are calculated at fixed locations downwind of the reattachment points. This model proves to be capable of reproducing the trapping and intermittent release of scalars, in agreement with the simulation of the flow passed a snow cornice performed by a discrete multi-vortex model, as well as with direct numerical simulations of the flow passed a backward-facing step. The results of simulation indicate that for flows undergoing separation and reattachment the unsteadiness of the recirculating bubble is the main mechanism responsible for the intense large-scale concentration fluctuations downstream.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.277-291
• /
• 1983

In order to investigate the shear characteristics of earth structure after construction. Four sample soils with different gradation were selected and compacted under the optimum moisture content and the maximum dry density. And the direct shear test and the triaxial compression test were performed with those sample soils under various pre-compression loads. The results were summarized as follows; 1. With the increase of the percent passing of No. 200 sieve, the cohesion of soil increased regularly and the internal friction angle of soil decreased with slow ratio. 2. The pre-compression increased the shear strength of compacted cohesive soil. The increase of cohesion was very apparent but the internal friction angle didn't show such regular tendency. 3. With the increase of pre-compression load, the slope of stress-strain curve showed steep at the early stage of horizontal strain. The vertical strain was small at the compression stage and big at the expansion stage. 4. When the vertical stress of shear test with increase in the horizontal strain was small, stress ratio(shear stress vs. vertical stress) of sample showed the largest value and the slope of stress ratio curve showed also steep. 5. When the sample was had the same condition, the cohesion of soil showed bigger value in the triaxial compression test and the internal friction angle of soil showed bigger value in the direct shear test.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.842-851
• /
• 1998

Development and growth of Acartia steueri from Ilkwang Bay, southeastern coast of Korea, were determined under various temperatures and food condition (Isochrysis galbana and Dunaliella salina) in the laboratory. Relationship between egg hatching time ($D_E$, day) and temperature (T, $^{\circ}C$) was $D_E=744(T+3.5)^{-1.97}$. Mean hatching success was $88.4\%$ in temperature range of $8.4\~26.2^{\circ}C$. This suggests that A. steueri may be adapted to the temperature ranges in temperate regions. Post-embryonic development pattern was equiproportional rather than isochronal, with longer stage duration of copepodites than that of the nauplii. Stage duration of NI was the shortest of all developmental stages, while the duration of NII was the longest in duration of the other nauplii. Male was morphologically distinguished from female in CIV stage, and male was developed faster than female. Median development time at a given temperature was calculated from the Belehradek equation by proper multiplication of proportional constant for embryonic development. Body carbon weight at $19.1^{\circ}C$ was increased exponentially with time. Mean specific growth rate of nauplii (0.200 $d^{-1}$), except for NI stage, was not significantly different from that of copepodites (0.190 $d^{-1}$), with the lowest rate in NVI stage (0.107 $d^{-1}$), probably due to energy consumption for metamorphosis rather than somatic growth. The results suggest that although the development pattern determined in this study was not identical with Uye's result for A. steueri (e.g. Uye, 1980b), median development time may be applicable to calculate the stage duration of A. steueri in this study area.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.70-77
• /
• 1999

Objective of this research is to obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(thinned trees) are analyzed. Proximate analysis shows the thinned wood contains 0.22-0.73% ash, 77-80% volatile matter, and 10-14% fixed carbon. The charcoal yield decreases and the shrinkage rate increases as the carbonization temperature and time increase. The charcoal yields of Larix leptolepis, Pinus rigida and Pinus densiflora are high, whereas those of Pinus koraiensis and Quercus variabilis are low. The shrinkage rate by carbonization has same trend as water removal of wood. The specific gravity after the carbonization decreases about 50% comparing to green wood. The charcoal has 0.89-4.08% ash, 6.31-13.79% volatile matter, and 73.9-83.5% fixed carbon. As the carbonization temperature and time increase, pH of charcoal increases. When the carbonization temperature is $400^{\circ}C$, pH is about 7.5. When the temperature is between 600 to $800^{\circ}C$, pH is about 10 with small difference. The water-retention capacity is not affected by the carbonization temperature and time. The water-retention capacity within 24hr is about 2.5 - 3times of sample weight, and the equivalent moisture content becomes 2-10% after 24 hr.