• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.6
• /
• pp.743-748
• /
• 2022

The initial operation stability of hydrogen-fueled, solid oxide fuel cell with Ni thin-film anode fabricated by direct current sputtering was evaluated in terms of electrochemical properties such as peak power density, open circuit voltage, overpotential, and alternating current impedance at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.54-63
• /
• 2013

In general, multiple hydraulic servo actuators are installed on one control surface of aero-dynamically highly loaded condition aircraft for redundancy management to satisfy flight control safety requirements. If motions of multiple actuators are not synchronized, control surface is deformed from its free stressed state. In result, force fight conditions are generated on each actuator due to restoration reaction force of deformed control surface. In addition, force fight is induced from severe initial rigging tolerance. Force fight condition of multiple actuators affects control accuracies and reduces operational life of actuators and control surface due to fatigue phenomenon. In this study, we designed controller using force feedback to reduce force fight of duplex servo actuation system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.280-281
• /
• 2003

본 연구는 전자파, 표류전압, 정전기 등 위험한 환경에서 충분한 안전성과 우수한 성능을 보이며 금속발열선(HBW)에 비해 빠른 작동시간을 가지는 반도체브리지 착화장치를 개발하여 로켓 추진기관 및 자동차 에어백 (Air-Bag)에 적용하는데 그 목적이 있다. 로켓 추진기관 착화장치 및 안전장치에는 고도의 안전성 및 신뢰성이 요구되어 기존의 금속발열선 착화장치보다 전자파, 표류전압, 정전기 등 위험한 환경에서 충분한 안정성과 제품의 신뢰도를 향상시킬 수 있는 신기술 착화장치 설계사양이 요구되며 자동차 에어백용 인플레이터(inflater)는 에어백에 공급하는 가스를 발생시키기 위한 초기 구성품으로 자동차의 특성상 높은 작동신뢰성 유지와 주변 환경으로부터의 안전성이 요구되어 현존하는 금속발열선형 착화장치를 대체하는 반도체브리지 착화장치 개발이 필수적인 상황이다. (중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.112-118
• /
• 2002

The adaptive m filters is more effective than m filters when acoustic feedback exists, in which cause an order of a FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm is not converged. In this paper, a stabilizing procedure for adaptive IIR filters is proposed. In the beginning of the ANC system, it improve a stability by pulling the poles of the IIR filter to the center of the unit circle, and it returns the poles to their original positions after the filter converge. Computer simulations and experiments are performed to show the effectiveness of proposed schemes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.4-5
• /
• 2002

로켓 엔진의 개발에 있어 성능과 수명(life time)에 가장 문제가 되는 것은 연소 안정성에 있다. 일반적으로 연소 불안정을 야기시키는 것은 3가지로서 축방향(longitudinal), 반경방향(radial)과 접선방향(longitudinal) 모드(mode)가 있다. 이와 같은 모드를 제어하는 방법에는 수동적 제어방법으로 음향공(acoustic cavity)과 배플(baffle)이 있으며, 음향공은 모드에 관계없이 특정한 주파수에 맞추어 체적을 조절하여 음향파(acoustic wave)를 감쇄시키는 것이고 배플은 주파수에 관계없이 접선방향 모드를 제어하는 것이 기본 목적이나 허브(hub)를 설치하여 반경방향 모드까지 제어할 수 있다. 음향공은 엔진의 성능 또는 연소장에는 영향을 주지 않고 작동하는 반면, 배플은 초기 엔진설계를 할 때 고려하지 않으면 후에 배플을 장착하였을 때는 초기 설계의 제한 때문에 장착의 어려움과 성능 및 연소장에 영향을 미쳐 원하지 않는 엔진의 시험 결과를 야기할 수 있다. 본 연구에서는 KSR-III와 동일한 조건의 연소기에서 다양한 배플을 장착하였을 경우에 대하여 성능과 연소장에 대하여 예측하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.24-30
• /
• 2013

To guarantee the exact control of missile warhead, it is inevitable to ensure the stabilities in the view points of structural and fluid/thermo dynamics of the rocket motor. Specially, despite of shortness in operating time of the rocket motor which is initial turning type of missile, it occurs frequently some problems of ablation at the neighborhood of the nozzle throat, with the result that the system itself gets to failure. In these connections, in the present study, the effect of the operating time of a rocket motor on the coefficient of convective heat transfer at the nozzle wall is investigated by numerical analysis. As a result, it is turned out that the heat transfer coefficient is largest at the just ahead of nozzle throat and decreases with the increase of operating time of the rocket motor. Furthermore, we found that the radius of curvature of throat becomes smaller, the maximum coefficient of convective heat transfer becomes larger.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.89-89
• /
• 2003

로켓엔진의 연소에 필요한 추진제를 안정적으로 공급하기 위한 추진제 공급시스템의 주요 구성과 설계 주요 인자를 정리하였다 공급시스템은 추진제 주입/배출 장치, 추진제탱크 가압 및 배기 장치, 추진제 공급 주/분기 배관, 극저온 산화제 온도 유지 장치 등으로 구성되어 있다. 주요 설계 제한 조건으로는 터보 펌프 입구에서의 추진제 압력 및 온도, 필요 추진제 공급 유량 및 온도 그리고 추진제 충진 및 비상 배출 허용 시간 등이며 이는 각 로켓의 해당 임무에 따라 적절히 결정된다. 발사체로부터 할당된 중량값 이내에서 고신뢰도의 작동성, 안정성이 보장되는 시스템을 설계하여야 하며 초기 설계 단계에서 개발 및 수급 가능성을 동시에 고려하여야 할 것이다. 또한 고추력 생성을 위해 엔진 클러스터링이 수행되어야 할 경우 각 엔진으로의 균등한 추진제 배분 공급이 설계의 중요한 요구 조건이 된다. 이러한 공급시스템의 개념은 액체산소와 케로신 조합의 액체 로켓인 100kg급 소형 위성 발사체(KSLV-Ⅰ)에 적용될 예정이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5763-5768
• /
• 2015

A relief valve is a mechanical element to keep safety by controlling high pressure. Usually, the high pressure is relieved by using the spring force and letting the fluid to flow from another way out of system. When its normal pressure is reached, the relief valve can return to initial state. The relief valve should be designed for smooth operation and should satisfy the structural safety requirement under operating condition. The commercial software ANSYS/WORKBENCH is utilized for flow and structural analysis. Very high pressure may cause structural problem due to severe stress. The study suggests the design satisfying the structural design requirement

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.99-106
• /
• 2006

In this paper, implementation of active mufflers using multiple channel adaptive IIR filter is presented. Usually, recursive LMS(RLMS) algorithms for adaptive IIR filters are highly efficient than filtered-X LMS(FXLMS) algorithms, when the order of both algorithms are the same. However, RLMS algorithms usually diverge before the algorithms arenot yet converged. So, the prefilters are presented to improve the stability by pulling the poles of feedback control transfer function in the beginning of active noise control and returning the original poles after the filters converge. The engine noises of diesel engine automobiles and gasoline engine automobiles are analyzed and the mathematical model of an active muffler is derived. Computer simulations and experiments are performed to show the effectiveness of the proposed systems.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.47-51
• /
• 2012

In this study, the deformation behavior stability of sealing rings with three different cross sectional areas has been presented using a FEM technique. To investigate the deformation behavior stability, the initial compression rate of 25% has been applied to the sealing ring, which is molded with a nitrile butadiene rubber. The maximum strain, maximum stress, and maximum contact normal stress have been analyzed for the working fluid pressure of $25kgf/cm^2$. The FEM results show that the maximum strain of a hollow o-ring and a hollow rectangular ring with a hollow space in the center of a sealing ring is higher than that of a conventional o-ring, but the maximum stress and the maximum contact normal stress are low. In these results, the sealing rings with a hollow space in the center of the cross sectional area is recommended to increase an extended endurance stability of sealing rings. But, the solid sealing ring is designed to guarantee the sealing safety of a contact sealing ring.