• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.119-128
• /
• 1999

본 연구는 등방탄성체에 고속충격하중이 작용하는 경우에 대한 유한요소해석에 관한 것으로 대상구조는 여러 가지 모양의 2차원 평면구조를 택하였다. Galerkin 방법을 이용하여 유한요소 정식화하였으며 직접시간적분법에 의해 수치해를 구하였다. 본 해석에서는 균열이 없는 평판으로 수치해와 이론해를 비교하여 수치해의 신뢰성을 확인하였으며, 0°, 30°, 45°경사 균열이 없는 평판에 적용한 3가지 예를 분석하였다. 수치해석 결과는 이론해의 결과와 상호 잘 일치하였다.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.22-29
• /
• 1997

본 논문에서는 균열이 존재하는 구조부재에 충격이나 폭발하중이 가해진 경우 동적응력확대계수를 구하는 방법들은 논의하고 특히 코오스틱 실험법 및 수치적으로 코오스틱 곡선을 구하여 동적응력확대계수를 구하는 과정을 자세히 설명하였다. 폭발 및 충격에 의한 구조물의 파괴해석은 이와 같은 하중을 받는 압력용기, 빌딩, 초고속선, 해군 함정 등의 파괴강도설계 및 안전성 평가에 핵심기술로 대두되고 있으며 또한 우주항공산업, 고속전철, 암반역학 등의 여러 분야에서 중요한 의미를 갖는다. 따라서 앞으로도 균열진전 및 정지조건, 탄소성 동적파괴해석 및 재료의 충격거동 등에 대한 연구들이 계속되어져야 할 것으로 사료된다.

• Composites Research
• /
• v.23 no.6
• /
• pp.14-18
• /
• 2010

Among the factors that threaten spacecraft, Micrometeoroid and Orbital Space Debris(MMOD) cause damage to spacecraft and impact velocity is about 8~70km/s. Nowadays, various Whipple Shield are studied and applied to protect spacecraft. As the materials used to Shielding System, aluminum is usually used but composite is also used increasingly. So this study compared characteristics of hypervelocity impact of Aluminum and composites through finite element analysis. The Projectile was a spherical shape using Aluminum 2017-T4, and aluminum plate was using Aluminum 6061-T6, CFRP plate was using T300/5208. Initial impact velocity of projectile was 1km/s. As a result, kinematic energy of projectile decreased to about 64J and about 63J for aluminum plate and CFRP plate, respectively after impact. Although both results is almost same about the absorption of impact energy, you can think the CFRP has good ballistic characteristic, because CFRP is lighter about 1.7 times compared with density of aluminum.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.171-172
• /
• 2007

초고속용사법(HVOF)은 우수한 강도와 높은 경도를 가지는 치밀한 후막형성이 가능하고 피로특성 및 열충격에 대한 저항성이 양호하여 종래에 사용되어 오던 전기도금등을 통한 표면처리 방법을 대체시키고 있다. 항공기엔진의 주요부품, 초고속 air bearing spindle등의 내구성향상을 위한 WC계 분말을 이용한 표면처리의 공정을 다구찌실험계획법을 이용해 최적조건을 선정하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.929-935
• /
• 2013

This paper presents the results of sizing optimization of ahat-shaped stiffener on a rectangular stiffened panel. The stiffened panel is subjected to impact loading by a projectile with a velocity of 1500-2500 m/s. To determine the size of the hat-shaped stiffener, sizing optimization was performed. The sizing optimization consists of three functions: objective, constraint, and design functions. The objective function is used to maximize the fundamental frequency of the stiffened panel. The constraint function is that the stiffener volume is less than 10% of the plate volume. The design function is the dimensions of the hat-shaped stiffener. By using the stiffened panel with the optimized hat-shaped stiffener, a hypervelocity impact was simulated, and the velocity and kinetic energy on the optimized stiffener was obtained. To evaluate the impact reduction on the stiffened panel, the velocity and kinetic energy of the projectile was normalized and compared.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1738-1747
• /
• 2003

Smoothed Particle Hydrodynamics (SPH), a pure Lagrangian numerical method, is applied to analysis of penetration phenomenon of bumper plate which is installed outside of spacecraft hull to protect the spacecraft against hypervelocity meteorite impact. Effects of SPH parameters, such as artificial viscosities, smoothing lengths, numbers of particles and time increments, are analysed by comparing the SPH simulation results with experimental ones with regard to subsequent formation of debris cloud. An optimum range of parameter values is determined by error analysis and various SPH numerical results are compared with experiments.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.118-131
• /
• 1995

The shock fracture analysis for the structures of navy vessels subject to underwater explosions or of high speed vessels frequently subject to impact loads has been carried out in two steps such as the global or macro analysis and the fine or micro analysis. In the macro analysis, Doubly Asymptotic Approximation(DAA) has been applied. The three main failure modes of structure members subject to strong shock loading are late time fracture mode such as plastic large deformation mainly due to dynamic plastic buckling, and the early time fracture mode such as tensile tearing failure or transverse shear failure. In this paper, the tensile tearing failure mode is numerically analyzed for the micro analysis by calculating the dynamic stress intensity factor $K_I(t)$, which shows the relation between stress wave and crack propagation on the longitudinal stiffener of the model. Especially, in calculating this factor, the numerical caustic method developed from shadow optical method of caustic well known as experimental method is used. The fully submerged vessel is adopted for the macro analysis at first, of which the longitudinal stiffener, subject to early shock pressure time history calculated in macro analysis, is adopted for the micro analysis.

• Composites Research
• /
• v.24 no.3
• /
• pp.31-38
• /
• 2011

In this paper, a novel hybrid composite shield to protect space structures from hypervelocity impact of micrometeoroid and space debris is proposed. The finite element model of the proposed shield was constructed and finite element analysis was conducted to approximate the energy absorption rate. Before the final model analysis, analysis of each component including the aluminum plate, PMMA plate, and intermediate layer of fabric was performed, verifying the finite element model of each component. The material properties used in the analyses were predicted material property values for high strain rates. The analysis results showed that, other than the fabric, the energy absorption rate of each component was in agreement. Afterwards, the finite element model of the hybrid composite shield was constructed, where it was analyzed for the restrained and unrestrained fabric boundary condition cases. Through the finite element analysis, the fiber pullout mechanism was realized for the hybrid shield with free boundary inserted fabric, and it was observed that this mechanism led to energy absorption increase.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.761-768
• /
• 2013

New warheads are designed and developed to be highly lethal when used as part of ballistic missile payloads. There are many trades associated with the design of a central warhead core, mainly dealing with the projectiles or penetrators. Obviously, a payload-type configuration is very susceptible to kills from one projectile because of the high impacts required for bomblet or submunition payloads. Based on these requirements, the optimum kill vehicle configuration will have the smallest mass and relative velocity that will kill all the submunitions. The designs of the penetrator shape and size are directly related to the space and weight of the warhead. The shape, size, L/D, penetrator material, and manner in which they are inserted inside the surrounding explosive segments are critical in achieving successful penetrator design. The AUTODYN-3D code was used to study the effect of penetrator penetration. The objective of numerical analysis was to determine the penetration characteristics of the penetrator produced by hypervelocity impacts under different initial conditions such as initial velocity, shape, and L/D of the penetrator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.619-626
• /
• 2017

In this work, the effect of attitude angle variation on drag coefficients of hemisphere in a Mach 6 flow has been investigated. Experiments were conducted in a shock tunnel and a free-falling technique was used to minimize flow disturbance by a sting. For attitude and drag coefficient measurements of a free-falling hemisphere, a free-falling technique based on a releasing mechanism with a stair-typed module and an electromagnet was developed. A shadowgraph technique was used for flow visualization using a high-speed camera.