• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.9
• /
• pp.321-326
• /
• 2015

In this paper, we proposed an algorithm which could transmit reliable data between smart devices by using inaudible high frequency of audible frequency range and cyclic redundancy check method. The proposed method uses 18 kHz~22 kHz as high frequency which inner speaker of smart device can make a sound in audible frequency range (20 Hz~22 kHz). To increase transmission quantity of data, we send mixed various frequencies at high frequency range 1 (18.0 kHz~21.2 kHz). At the same time, to increase accuracy of transmission data, we send some mixed frequencies at high frequency range 2 (21.2 kHz~22.0 kHz) as checksum. We did experiments about data transmission between smart devices by using the proposed method to confirm data transmission speed and accuracy of the proposed method. From the experiments, we showed that the proposed method could transmit 32 bits data in 235 ms, the transmission success rate was 99.47%, and error detection by using cyclic redundancy check was 0.53%. Therefore, the proposed method will be a useful for wireless transmission technology between smart devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.333-340
• /
• 2018

This paper introduces a BCH code decoder using parallel CRC(: Cyclic Redundancy Check) generation. Using a conventional parallel syndrome generator with a LFSR(: Linear Feedback Shift Register), it takes up a lot of space for a short code. The proposed decoder uses the parallel CRC method that is widely used to compute the checksum. This scheme optimizes the a syndrome generator in the decoder by eliminating redundant xor operation compared with the parallel LFSR and thus minimizes chip area and propagation delay. In simulation results, the proposed decoder has accomplished propagation delay reduction of 2.01 ns as compared to the conventional scheme. The proposed decoder has been designed and synthesized in $0.35-{\mu}m$ CMOS process.

• Korean Journal of Optics and Photonics
• /
• v.27 no.4
• /
• pp.133-142
• /
• 2016

This paper presents the design and simulation of a three-dimensional pixel-by-pixel scanning light detection and ranging (LIDAR) system with a microelectromechanical system (MEMS) scanning mirror and direct sequence optical code division multiple access (DS-OCDMA) techniques. It measures a frame with $848{\times}480$ pixels at a refresh rate of 60 fps. The emitted laser pulse waves of each pixel are coded with DS-OCDMA techniques. The coded laser pulse waves include the pixel's position in the frame, and a checksum. The LIDAR emits the coded laser pulse waves periodically, without idle listening time to receive returning light at the receiver. The MEMS scanning mirror is used to deflect and steer the coded laser pulse waves to a specific target point. When all the pixels in a frame have been processed, the travel time is used by the pixel-by-pixel scanning LIDAR to generate point cloud data as the measured result.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.101-110
• /
• 2009

The 6LoWPAN(IPv6 Low-power Wireless Personal Area Network) performs IPv6 header compression, TCP/UDP/IGMP header compression, packet fragmentation and re-assemble to transmit IPv6 packet over IEEE 802,15.4 MAC/PHY. However, from the point of view of security. It has the existing security threats issued by IP packet fragmenting and reassembling, and new security threats issued by 6LoWPAN packet fragmenting and reassembling would be introduced additionally. If fragmented packets are retransmitted by replay attacks frequently, sensor nodes will be confronted with the communication disruption. This paper analysis security threats introduced by 6LoWPAN fragmenting and reassembling, and proposes a re-transmission mechanism that could minimize re-transmission to be issued by replay attacks. Re-transmission procedure and fragmented packet structure based on the 6LoWPAN standard(RFC4944) are designed. We estimate also re-transmission delay of the proposed mechanism. The mechanism utilizes timestamp, nonce, and checksum to protect replay attacks. It could minimize reassemble buffer overflow, waste of computing resource, node rebooting etc., by removing packet fragmentation and reassemble unnecessary.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.237-238
• /
• 2019

본 과제는 기존의 기술의 현황으로 건강 검진 검사 하는데 오랜 시간과 비용이 많이 소요된다. 그로 인해 저소득층이나 교통이 어려운 곳에 위치한 섬 마을 등에서는 진료가 굉장히 어렵고 부담이 된다. 스마트 건강검진 키트는 간단한 부착을 통해 바이탈을 한번에 측정이 가능하고 그 결과를 그래프화 하여 검사 결과를 일반인도 한 눈에 볼 수 있게하며 그리고 수치를 표시하여 문제가 있을 시 그 수치를 정상수치와 비교하여 블루투스를 통해 의사에게 보낼 수 있도록 목표를 설정하였다. 진료 전 맥파(PPGA), 혈중산소포화도(SpO2), 심전도(ECG), 체온 센서를 활용하여 바이탈 수치를 한번에 측정하고 수치화된 정보를 그래프화 시켜 나타내어 의사에게 결과를 수신하여 기초진단에 필요한 시간적 문제를 줄인다. 또한 기초 진단에 문제가 있을 경우 환자 개인에게도 수신하여 자신의 진료 당시 기초 진단 정보와 일반적인 경우와 비교할 수 있도록 활용할 수 있다.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.221-231
• /
• 2024

The aim of this study was to enhance the safety and care of mental health for seafarer working in passenger ship workspaces. Brightness, color values, and color distribution were investigated with issues and improvement ways identified through seafarers' interviews. Firstly, previous studies, references, current policy, regulations, and accident case studies were reviewed. Color compositions of wheelhouse and engine room of M Ship were then surveyed in the field. Color values of each space were analyzed using a colorimeter. Colormeter analysis of brightness and color measurements in the wheelhouse and engine areas indicated that ceilings, walls, and floors were generally dark, with the engine area being very dark. Regarding color, green and blue were distributed in the ceiling of the wheelhouse and engine area, while red and blue were in the walls and floors of the wheelhouse and engine area. According to interviews with seafarers currently working at engine rooms, they responded about their experience of near miss incidents due to a decrepit indoor environment, a dark working environment, slippery and bright flooring, and stairs that were not suitable for domestic users. Thus, when installing lighting in the future, the brightness of the space should be improved by distinguishing between night and day. A lighting plan considering the location of lighting, level of shadow formation and contrast, reflectance of the facility, glare, color of light, floor color plan, and material selection is needed. A facility design suitable for domestic users is also needed.