• Clean Technology
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2004

Domestic leather company is working hard to solve present environmental problem. Leather industry is realized by representative pollution industry. An advanced nation is trying to develop clean technology by collaborating research institute with the chemical company, and tannery. This research introduced information that is gained through technical transfer in leather processing. This project started to solve environmental problem of leather industry. Specially the environment and economic problem is caused from chrome which exists in the waste water or solid waste. Representative technologies, reduced chrome tanning, non-chrome tanning method, are being introduced through transfer. Also lightweight leather development advances the research which uses non-metal tanning agent.

• Air Cleaning Technology
• /
• v.17 no.4 s.67
• /
• pp.39-57
• /
• 2004

첨단산업으로 불리는 반도체, LCD, PDP, 유기EL(OLED) 등의 생산 공정은 고도의 청정상태를 요구하며, 때문에 이들의 생산공정 중 대부분이 클린룸 내에서 이루어진다. 클린룸 내에서의 주요공정은 크게 박막형성(Layering), 노광(Photo Lithography), 식각(Etching) 등 3가지 공정으로 나눌 수 있으며, 반도체 제조공정의 경우 특별히 도핑(Doping) 공정이 추가된다. 오염물질을 함유하는 클린룸 배기는 일반적으로 산, 알칼리, Toxic(PFCs, Flammable), VOC 등으로 분류하며, 각각의 배기는 각 배기특성에 맞는 오염제어 장치를 통해, 정화된 후, 대기로 방출된다. 산, 알칼리 배기는 일반적으로 최종 단계에서 중앙집중식 습식스크러버에 의해 흡수, 중화 처리되며, VOC의 경우 농축기(Concentrator) & 축열식 열 산화장치(RTO) 설비에 의해 연소 처리된다. 하지만 CVD공정으로부터의 배기가 주를 이루는 Toxic배기의 경우, 다량의 PFCs(과불소화합물) 가스를 함유하고 있는 이유로, 대부분 클린룸 내부에 P.O.U(Point of use) 처리장치가 설치되며, P.O.U에 의해 1차 처리된 후 최종적으로 중앙집중식 습식스크러버를 거쳐 대기로 방출된다. 알칼리배기의 주성분으로는 암모니아($NH_3$), HMDS (Hexa Methyl DiSilazane), TMAH (Tetra Methyl Ammonium Hydroxide), LGL, CD 등이며 흡수액에 황산(Sulfuric Acid)용액을 공급, 중화처리하고 있다. 탄소성분을 먹이로 하는 미생물의 번식에 의한 막힘 문제를 제외하고는 큰 문제가 없다. 하지만 Toxic배기 및 산배기의 경우 처리효율이, 가스흡수 이론에 의한 계산결과와 비교할 때, 매우 저조하게 나타나는 효율부족 현상을 겪고 있으며, 이는 잔여 PFCs 가스성분 및 반응에어로졸, 응축에어로졸 등의 영향으로 추정하고 있다. 최근 Toxic 배기의 경우, P.O.U 설비를 Burn & Wet type으로 변경하여, 배기 중 PFCs 및 반응에 에어로졸($SiO_2$)의 농도를 원천적으로 감소시키는 노력이 진행 중이다. 산배기의 경우, 산결로 현상에 의한, 응축에어로졸이 문제가 되고 있으나 내식열교환기(Anti-Corrosive Heat Exchanger), 하전액적스크러버 시스템(Charged Droplets Scrubber System), Wet ESP(Wet Electrostatic Procipitator) 등의 도입을 통해 문제해결을 위한 노력을 경주하고 있다.

• Nuclear industry
• /
• v.25 no.8 s.270
• /
• pp.21-26
• /
• 2005

최근에 발효된 기후 변화 협약에 대처할 수 있는 청정 에너지원으로서 수소가 큰 기대를 받고 있다. 이에 따라 미국을 비롯한 선진국들은 수소 생산과 수소 활용을 위한 기술 개발을 적극적으로 추진하고 있다. 수소 생산 방법으로서는 탄화수소에 고온의 수증기를 불어넣어 수소를 분리해 내는 증기개질법이 현재로서는 가장 효율적인 방법으로 알려져 있으며, 고온가스로(HTGR)가 가장 경제적인 열원으로 대두되고 있다. 중국은 2020년까지 3000만kW의 신규 원자력발전소(주로 PWR) 건설을 계획하고 있으며, 발전과 수소 생산을 위한 열을 동시에 공급할 수 있는 고온가스로의 상용화 개발 프로그램을 추진중이다. 2005년 3월호에 게재된 중국의 HTGR 개발 관련 기사를 소개한다.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.874-882
• /
• 2019

In this study, the gasification characteristics of four types of unused woody biomass and one waste wood in a lab-scale bubbling fluidized bed gasifier (Diameter: 0.11 m, Height: 0.42 m) were investigated. Effect of equivalence ratio (ER) of 0.15-0.3 and gas velocity of $2.5-5U_0/U_{mf}$ are determined at the constant temperature of $800^{\circ}C$ and fuel feeding rate of 1 kg/h. The silica sand particle having an average particle size of $287{\mu}m$ and olivine with an average particle size of $500{\mu}m$ were used as the bed material, respectively. The average product gas composition of samples is as follows; $H_2$ 3-4 vol.%, CO 15-16 vol.%, $CH_4$ 4 vol.% and $CO_2$ 18-19 vol.% with a lower heating value (LHV) of $1193-1301kcal/Nm^3$ and higher heating value (HHV) of $1262-1377kcal/Nm^3$. In addition, it was found that olivine reduced most of C2 components and increased $H_2$ content compared to silica sand, resulting in cracking reaction of tar. The non-condensable tar decreases by 72% ($1.24{\rightarrow}0.35g/Nm^3$) and the condensable tar decreases by 27% ($4.4{\rightarrow}3.2g/Nm^3$).

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2002.11a
• /
• pp.247-254
• /
• 2002

과학기술이 더 가까워질 미래사회로 갈수록 전력은 신규수요와 대체수요의 증가로 지금보다 많은 량의 공급을 요구할 것이다. 이 때문에 환경문제에 있어 전력산업의 영향이 커지고, 이로 인해 전력의 청정공급 체계 구축은 국제규범의 수립과 함께 국민복지나 환경보존의 차원에서 필연적이다. 따라서 LCA는 청정생산을 위한 분석능력을 갖추고, 이를 바탕으로 점차 완전한 민영화 상태에서 경쟁구도로 이어질 전력산업 참여자들의 기업가치 극대화에 기여할 필요성이 대두된다. 이를 위해 본 연구에서는 LCA의 역할 확산 경로를 거시적으로는 국제규범과 소비자 만족 그리고 미시적으로는 기업의 가치 극대화와 환경경영체제 수립이라는 측면에서 이루어져야 할 것으로 제시하였다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.05a
• /
• pp.75-89
• /
• 1996

Factory style plant production system be aimed to produce standardized horticultural products with high quality and clean due to optimization of environment and the improvement of working efficiency, through overcome non-efficiency of production structure in conventional cultivation method. The suggest about actual techniques and development strategies of plant factory in Korea are as follows. (omitted)

• Journal of the Korean institute of surface engineering
• /
• v.52 no.4
• /
• pp.227-232
• /
• 2019

Mo-N based coatings have been studied for enhancing mechanical characteristics of thin films. In the case of Mo-X-N coatings, the microstructure and mechanical properties can be affected by the addition of the third element. In this work, Mo-Cu-N coatings were successfully fabricated with varying the Cu content from 4.5 at% to 31 at% by the co-sputtering method. Thus, properties of the coatings were analyzed by EDS, SEM, XRD, AFM, nano indentation and scratch test techniques. From observed results, MoxN bonds were made in a nitrogen atmosphere and Cu elements were present at grain boundaries. In addition, coatings with the Cu content above 14 at% had a Cu3N peak in the XRD results. Thus, it is suggested that the formation of Cu3N phase affected the microstructure and mechanical properties of Mo-Cu-N coatings. Mechanical properties of Mo-Cu-N coatings were found to be relatively better at Cu content of about 12 at%.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.27-33
• /
• 2023

An optimized design of the transportation insulated box must be considered to control the thermal damage in order to maintain the fresh condition for temperature-sensitive medicine and frozen food safety. The inside temperature of the insulated box is a natural convection enclosure state, thermal stratification naturally occurs as time passes in case of with outside heat load. The latent heat material (LHM) placement inside the box maintains the target temperature of the product for temperature fluctuations during transport, and LHM application is a common and efficient method. In this work, inside temperature stratification in an insulated box depending on the LHM pack position is numerically simulated and experimented. The insulated box is made up of vacuum insulation panel (VIP), and LHM modules are placed over six faces inside the box, with the same weight. The temperature curves for 72 hrs as experiment results clearly show the temperature stratification in the upper, middle, and lower at the LHM melting time region. However, the temperature stratification state is uniformly changed in accordance with the condition of the upper and lower placement weight of the LHM pack. And also, the temperature uniformity by changed placement weight of LHM has an effect on maintaining time for target air temperature inside the box. These results provide information on the optimized design of the insulated box with LHM.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.522-528
• /
• 2023

In this work, adhesive tapes were prepared for the dicing process in semiconductor manufacturing. Compounds with different numbers of photoreactive groups (f = 1 to 3) were synthesized and incorporated into acrylic copolymers to formulate UV-curable acrylic adhesives. Structural confirmation of the synthesized photoreactive compounds (f = 2 or 3) was performed using nuclear magnetic resonance (NMR) spectroscopy. The introduction of the photoreactive compounds into the acrylic adhesive was accomplished by urethane reactions, and the successful synthesis of the UV-curable acrylic adhesive was verified by Fourier transform infrared (FT-IR) measurements. To evaluate the performance of the adhesive, the peel strength was evaluated before and after UV irradiation using a silicon wafer as a substrate. The adhesive exhibited high peel strength (~2000 gf/25 mm) before UV exposure, which was significantly reduced (~5 gf/25 mm) after UV exposure. Interestingly, the adhesive containing multifunctional photoreactive compounds showed the most significant reduction in peel strength. In addition, surface residue measurements by field emission scanning electron microscopy (FE-SEM) showed minimal surface residue (~0.2%) after UV exposure. Overall, these results contribute to the understanding of the behavior of UV-curable acrylic adhesives and pave the way for potential applications in semiconductor manufacturing processes.

• Clean Technology
• /
• v.8 no.4
• /
• pp.205-215
• /
• 2002

Can industry has grown up with growth of packing industry and its recycling activation in recent years. But profit has became low by oversupply. Therefore, can industry needs a reduction of environmental load and official loss by an optimization of process in order to maintain its competitiveness. In this study, the main issues of aluminium can production was investigated by life cycle assessment. As a result of LCA, it examined closely by main issues that reduce defective cans and remove tramp oil. In the present work, it was recommended that setup of R/O system, sterillizing tramp oil separation, and heating system of DI water. The ROI investigated 6.4 months. The operating cost with the advanced processes could be reduced annually by 300 million won.