• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.287-288
• /
• 2014

본 논문에서는 3레벨 4레그 컨버터에서 커먼 모드 전압(Common-mode Voltage, CMV)을 저감하기 위한 삼각파 비교 전압 변조 기법을 제안하였다. 제안한 PWM 방법은 매우 직관적이고, DSP 제어 시스템에서 쉽게 구현할 수 있다. SVPWM, SPWM의 스위칭 패턴 분석을 통하여 CMV 저감을 위한 4번째 레그(f상)의 극 전압 패턴을 제안하였고, 해당하는 f상 극 전압의 합성을 위하여, f상 양/음의 극 전압 지령 값을 계산하였다. 또한 a, b, c상 전압 왜곡을 막기 위한 옵셋 전압을 유도하였다. 제안한 PWM 방법의 유효성은 모의실험과 실험 결과를 통하여 검증되었다. 제안된 방법에서 CMV의 첨두치 및 스위칭 수는 SVPWM 방법에 비하여 각각 33%, 25%로 대폭 감소하였다.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.130-134
• /
• 1990

In this paper, pSDF-based referance image is reahzed. Using BJTC(binary joint transform correlator) as nonlinear correlator, optical pattern recognition for interclass discrimination is performed. Experimental results show that correlation peak intensity of one calss is two times higher than that of the other class, which indicates its superiority in discrimination sensitivity.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.43-47
• /
• 1982

In this paper, we derived to anlyze the correlation between the peak sidelobe of the linear isotropic random array and the design parameters, such as the element numbers, wavelength, scanning angle, confidence level and the length of aperture, with the statistical theory of random processes. The Peak sidelobe estimator was tested by the computer simulations using Honte Carlo method. Consequently, it was evident that the results of the peak lidelobe estimator were consistent with those of the computer simulations over confidence level 0.7.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.15-22
• /
• 2000

This paper proposes a distributed highlight algorithm to generate efficiently echo signal for underwater target. In this algorithm, echo signal is synthesized by discontinuity highlights that are varied to incident angle, by equivalent and specified position highlights according to the spatial target structure. Completed UTAHID(Underwater TArget by Highlight Distribution) model is confrimed that PTS, ETS, echo elongation effect, target time spreading loss and envelope fluctuation are satisfied to expected values by various simulations. Thus it can be efficiently used in all sorts of real systems related to underwater target echo signal synthesis in active sonar.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.651-656
• /
• 2001

Histogram intersection method, that counts the occurrence of color pixels, is one of the easy and simple color image retrieval methods. The method has an appropriate global property but does not contain the knowledge of shape for images. The absence of spatial information makes it difficult to discriminate images of the similar histogram. The application of one-dimensional projection to each image enables to obtain shape or spatial information of image. But in this case there is another problem having different length of the projection vector according to the size of each image. Thus this paper proposes a method that uses relative distances between peaks and their maximum value in the projection vector. In order to verify retrieval performance, the experimental results between the histogram intersection method, the projection only method, and the proposed one are compared and analyzed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.137-147
• /
• 2008

The relative magnitudes of the individual terms of the momentum equation are analyzed and compared by analytical methods. The temporal variations of each term are analyzed for the influence factors to runoff expressed by the parameters of the momentum equation, stream slopes and roughness coefficients. The magnitudes of local acceleration and convective acceleration offset each other. The peak time of each term except the gravity term coincides with inflection point of the hydrograph rising limb each other. The magnitudes of each term vary with the channel characteristics, especially when the roughness coefficients are dominant or for the mild stream slopes the pressure term can not be negligible.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.53-62
• /
• 2005

The NG-SDH system requires signal synchronization to synchronize incoming ethernet signal with GFP frame. The foreign nation research completes a chipset development until now and it secures a relation technique, but it does not secure a relation technique from domestic. Therefore, in this paper, we presented with signal synchronization method of Ethernet signal through GFP frame. We knew that the synchronized method of Ethernet signal through GFP-F must apply ingress & egress buffer and GFP Idle. We understood that the synchronized method of Ethernet signal through GFP-T must apply GFP Idle and $65B{\_}PAD$, and require maximum 3-bit addition & deletion of idle. Also we showed signal synchronization realization through simulation and obtained MTIE/TDEV characteristics and peak to peak jitter in egress output.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.742-746
• /
• 2008

With the trend of factory automation, nowadays, much industrial machinery tends to be put into 24-hours operation a day. However, these trends in industrial equipments also increase the possibility of various mechanical problems and bring about innumerable maintenance cost. There is a strong need of the condition monitoring and diagnosis for industrial equipment, especially rotating machinery, since they are connected not only to the reduction in the maintenance costs but also connected to the enhancement of production efficiency. Generally, to evaluate the operating conditions in the machinery in the industrial field, various physical properties are monitored. Among them, vibration and Noise signals are the mist important indicator and it is effectively used in many diagnosis systems for machinery. Much previous research is based in the FFT (Fast Fourier Transform) method. The spectral analysis is assumed that the signal is stationary. However, almost random signals are non-stationary. The wavelet transform has been recognized an efficient Method. Most interesting sounds have time-varying features. Signal processing techniques for the analysis of transient sound have been not clearly given yet.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2000

We propose a modified nonlinear fiber optic interferometer which can serve to generate binary optical pulse sequences for CDMA networks, and to decode them. In one arm cross-phase modulation between a CW signal and a counter- or copropagating high-power pulse takes place in sequences of segment connected via VDM couplers. Preliminary experimental results on code generation as well as autocorrelation and crosscorrelation are presented, using Sagnac interferometer. As we expected, the experimental results show that the outputs of the interferometer device are not summed simply on the basis of power, but the sin-squared version of it. Arbitrary codes can in principle be implemented.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.687-700
• /
• 1995

The thermal-hydraulic transient analysis of the proposed CANDU-9 plant was peformed. Several major transients ore analyzed if they meet the heat transport system design requirements. The proposed heat transport system configuration and the preliminary sizes of system equipment are justified by analysis in terms of the fuel integrity and the high system pressure limit during transients. The compliance with AECB R-77 requirements for CANDU-9 reactor was estimated. The analysis results showed that for each postulated accident the peak pressure values in the reactor headers are within the acceptance criteria given in ASME code requirements and the fuel overheating is prevented. One pump start-up during the reactor start-up operation was analyzed to investigate the How reversal through the fuel channel, which is specific in the proposed CANDU-9 plant.