• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.453-458
• /
• 2000

The permeability of oxygen and nitrogen was investigated from the polymeric LB films containing imidazole-metal ion complexes and compared with its corresponding cast films on porous membrane filters. The amphiphilic polymer, poly(N- (2-(4-imidazolyl)ethyl)-maleimide-alt-1-octadecene) (IM-O), was synthesized by reaction of poly(maleic anhydride-alt-1-octadecene) with histamine. The IM-O nonolayer showed high stability on Fe (III) ion-containing subphase. The molecular structure in the LB films was investigated by means of FT-IR spectroscopy. The metal ion concentration incorporated into the LB films was determined by means of XPS measurements. The mechanical stability and uniformity of the LB films on porous substrates were indirectly evidenced by SEM observation. The LB and cast films showed more or less higher selectivity toward nitrogen, and high permeability was found to both the oxygen and nitrogen.

• YAKHAK HOEJI
• /
• v.40 no.6
• /
• pp.670-678
• /
• 1996

The combinations of N-4-salicyloamido-2-amino-6-piperidinopyrimidine 3-oxide (Salmi) and two transitional metals were colored. Among metals, Fe(III) made a distinct colored comp lex with Salmi. The mole ratio of Salmi and Fe(III) in the complex was 1:1. This Salmi-Fe(III) complex was recrystallized in Hexane/Acetone(=10/1, v/v) and investigated its physicochemical properties. The color of this complex was changed by pH.; deep violet pink in acids, orange in neutral, and yellow in bases. The range of color change was approximately 0.7 pH unit. Acid-base titration of various acidic or basic drugs using Salmi-Fe(III) complex as an indicator showed good accuracy and reproducibility.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.540-548
• /
• 1996

In general residual stress is measured by X-ray diffraction method but in case of bonding residual thermal stress it is inadequate technique to examine the stress singularity. Therefore Two-dimensional elastic boundary element analyses were carried out to investigate the residual thermal stress and stress singularity of bonding interface in Al/Epoxy. This boundary element results were compared with the strain gauge measurements. The effects of different interface models, sub-element and adherend thickness are presented and discussed. On the basis of the obtained results, interface delamination causing by normal stress is expected and stress singularity is observed more intensively increasing with adherend thickness. It is concluded that the bonding strength of Al/Epoxy interface can be estimated correctly by taking into account the stress singularity at the edge of the interface.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.562-567
• /
• 2007

The stereoselective synthesis of chiral terminal epoxide is of immense academic and industrial interest due to their use as versatile starting materials as well as chiral intermediates. In this study, new polymeric chiral Co(salen) complexes bearing tallium (III)chloride and iron (III)chloride (ferric chloride) have been synthesized and characterized. Their catalytic activity and selectivity have been demonstrated for the asymmetric ring opening of various terminal epoxides using water and phenol derivatives as nucleophiles. The easily prepared polymeric complexes exhibited very high enantioselectivity for the asymmetric ring opening of epoxides with $H_2O$ and phenol nucleophiles, providing enantiomerically enriched terminal epoxides (> 98% ee). The system described in this work is very efficient for the synthesis of chiral epoxide, 1,2-diol and ${\alpha}$-aryloxy alcohol intermediates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.589-594
• /
• 2007

The effect of synergists having chelating ability on inhibiting browning were studied with a giucose-glutamic acid model for doenjang containing citric acid as the anti-browning agent and iron ion. The model solutions were prepared by dissolving 0.1 M glucose, 0.1 M glutamic acid, 50 mM citric acid, 0.2 mM $FeCl_2$ and synergist in 1 M phosphate buffer (pH 7.0), heating at $50^{\circ}C$ for 24 hr and storing at $30^{\circ}C\;or\;40^{\circ}C$ for four weeks. Synergists were chitosan, gallic acid, methyl benzoate, pyrophosphate and tannic acid; they were used at the following concentrations: gallic acid, pyrophosphate and tannic acid at 0.015% and 0.15%; chitosan and methyl benzoate at 0.0075% and 0.015%. Anti-browning capacities had a tendency to decrease greatly after three weeks in the case of storage at $30^{\circ}C$, whereas they decreased with storage time during storage at $40^{\circ}C$. However, anti-browning capacities of samples containing 0.015% tannic acid and 0.15% pyrophosphate were higher than that of sample without synergist by 32% after storage at $30^{\circ}C$ for four weeks. Gallic acid, tannic acid and pyrophsphate also inhibited the formation of Maillard reaction intermediates such as fluorescent compound and 3-deoxyglucosone due to the high chelating ability with iron ion after four weeks of storage at $30^{\circ}C$. The effect of these compounds on the inhibition of formation of Maillard reaction intermediates was higher at 0.15% than at 0.015%. Moreover, gallic acid increased the browning by forming colored complexes, and tannic acid generated black precipitates. Therefore, pyrophosphate of food additives was found to be the most useful synergist of citric acid, the anti-browning agent for doenjang.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.20-24
• /
• 2007

The effects of phenolic acids on inhibition of browning by the Maillard reaction were investigated with a glucose-glutamic acid model for doenjang with citric acid as the antibrowning agent and phenolic acid as its synergist. Five phenolic acids, cinnamic, coumaric, caffeic, hydroxybenzoic, and protocatechuic acids, were used. In order to investigate the antibrowning capacity, 0.1M glucose, 0.1M glutamic acid, 50mM citric acid, and 1mM phenolic acid were dissolved in 1M phosphate buffer (pH 7.0), heated at $50^{\circ}C$ for 24hr in the presence of 0.2mM $FeCl_{2}$, and stored at $4^{\circ}C$ or $30^{\circ}C$ for four weeks. Phenolic acid addition more efficiently inhibited browning during storage at $30^{\circ}C$ than at $4^{\circ}C$, without changes in pH. Hydroxybenzoic acid was the most efficient and increased the antibrowning capacity by 13% compared to sample without phenolic acids. Although caffeic and protocatechuic acids inhibited most the formation of 3-deoxyglucosone or fluorescence, they increased browning by forming colored complexes between two hydroxy groups of phenolic acids and iron ions. Hydroxybenzoic acid will be able to be a useful synergist of citric acid, an antibrowning agent in doenjang, since it is permitted for doenjang.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.35-43
• /
• 2005

Bioslurping combines the three remedial approaches of bioventing, vacuum-enhanced free-product recovery, and soil vapor extraction. Bioslurping is less effective in tight (low-permeability) soils. The greatest limitation to air permeability is excessive soil moisture. Optimum soil moisture is very soil-specific. Too much moisture can reduce air permeability of the soil and decrease its oxygen transfer capability. Too little moisture will inhibit microbial activity. So Modified Fenton reaction as chemical treatment which can overcome the weakness of Bioslurping was experimented for simultaneous treatment. Although the diesel removal efficiency of SVE process increased in proportion to applied vacuum pressure, SVE process was difficulty to remediation quickly semi- or non-volatile compounds absorbed soil strongly. And SVE process had variation of efficiency with distance from the extraction well and depth a air flow form of hemisphere centering around the well. Below 0.1 % hydrogen peroxide shows the potential of using hydrogen peroxide as oxygen source but the co-oxidation of chemical and biological treatment was impossible because of the low efficiency of Modified Fenton reaction at 0.1 % (wt) hydrogen peroxide. NTA was more efficiency than EDTA as chelating agent and diesel removal efficiency of Modified Fenton reaction increased in proportion to hydrogen peroxide concentration. Hexadecane as typical aliphatic compound was removed less than Toluene as aromatic compound because of its structural stability in Modified Fenton reaction. What minimum 10% hydrogen peroxide concentration has good remediation efficiency of diesel contaminated groundwater may show the potential use of Modified Fenton reaction after bioslurping treatment.