• Title/Summary/Keyword: 철분말

Search Result 32, Processing Time 0.023 seconds

Recovery of $\alpha$-iron from converter dust in a steel making factory -Utilization of the converter dust in a steel making factory- (제장소 전노 dust로부터 $\alpha$-장분말 회수에 관한 연구(II) -전노 dust의 이용에 관한 연구-)

  • Kim, Mi-Sung;Kim, Mahn;Cho, Moung-Ho;Oh, Jae-Hyun;Kim, Tae-Dong;Kim, Sung-Wan
    • Resources Recycling
    • /
    • v.3 no.2
    • /
    • pp.9-16
    • /
    • 1994
  • In this study, the grinding and wet cyclone process of the dust for the effective separation of high purity iron powder and iron oxide were investigated. The results obtained in this study can be summarized as follows: 1. By applying the wet cyclone technique for the iron powder(+200 mesh) produced from EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.76% of Fe was obtained with 47.66% yield at grinding time of 5 minutes by attritor. 2. The particle size distribution of the iron powder recovered from converter dust is quite simillar with the iron powder of sweden Hoganas Co.(W40.24, W40.29, W40.37, W40.37OX). 3. By using iron powder, copper ions are all adsorbed and removed in any concentration ranges of copper sulfate solution(Cu:100, 200, 300, 600 ppm).

  • PDF

Study on Analysis Technique Comparison and Evaluation of High Thermal Conductivity Concrete with Magnetite Aggregates and Steel Powder (자철광 및 철분말을 혼입한 고열전도 콘크리트의 열전도 평가 및 해석기법 비교에 대한 연구)

  • Lee, Hack-Soo;Kim, Min-Kyu;Kwon, Seung-Jun
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.3
    • /
    • pp.315-321
    • /
    • 2014
  • Concrete as a construction material is widely used in nuclear vessel and plant for excellent radiation shielding. However the isolation characteristics in concrete may affect adversely in the case of fire and melt-down in nuclear vessel since temperature cooling down is very difficult from outside. This study is for development of high thermal conductive concrete, and its mechanical and thermal properties are evaluated. Magnetite aggregates with volume ratio of 42.3% (maximum) and steel powder of 1.5% are replaced with normal aggregates and thermal properties are evaluated. Thermal conductivity little increases by 30% addition of magnetite but rapidly increases afterwards. Finally thermal conductivity is magnified to 2.5 times in the case of 42.3% addition of magnetite. Steel powder has a positive effect on high thermal conduction to 106~113%. Several models for thermal conduction like ACI, DEMM, and MEM are compared with test results and they are verified to reasonably predict the thermal conductivity with increasing addition of magnetite aggregates and steel powder.

Kinetic Study on Preparation of Iron Fine Powders by Hydrogen Reduction of Ferous Chloride Vapor (염화물의 기상환원반응에 의한 미립질 철분말의 생성속도에 관한 연구)

  • Lee, Hwa-Yeong;Kim, Seong-Gyu
    • Korean Journal of Materials Research
    • /
    • v.10 no.6
    • /
    • pp.385-391
    • /
    • 2000
  • A kinetic study on the preparation of iron powder by hydrogen reduction of ferrous chloride vapor has been carried out both experimentally and theoretically. For the preparation of iron powder, ferrous chloride was vaporized and transported to a reaction zone by Ar gas used as carrier. Ferrous chloride vapor and hydrogen were mixed and subject to a reduction reaction at high temperature to produce iron powder and HCI gas. Iron powder was collected with organic solvent at the end of reaction zone and HCI gas was also absorbed in a caustic soda solution to determine the conversion ratio of ferrous chloride. For the development of rate equations, a 1st-order reaction and equilibration of ferrous chloride vapor with Ar gas were assumed. According to the results, the rate constant, k could be expressed as $k=7,879exp(-53,840/RT)\textrm{dm}^3/mole.sec$ and the activation energy was found to be 53.84kJ/mole. From TEM observation, the particle size distribution of iron powder produced was found to be in the range of $0.1~1.0{\mu\textrm{m}}$ which was not significantly influenced by reaction temperature or gas flow rates.

  • PDF

Separation and Recovery of Silicon Powder from Waste Silcon Sludge (폐실리콘 슬러지로부터 실리콘 분말의 분리 회수)

  • Jang, Hee-Dong;Chang, Han-Kwon;Suh, Yong-Jae;Kim, Byoung-Gyu;Hong, Seung-Hui;Chang, Won-Chul
    • Proceedings of the Korean Institute of Resources Recycling Conference
    • /
    • 2005.05a
    • /
    • pp.147-151
    • /
    • 2005
  • 실리콘 잉곳의 절단공정에서 발생하는 폐실리콘 슬러지는 실리콘과 실리콘카바이드 등의 유가자원이 함유되어 있는데, 본 연구에서는 폐실리콘 슬러지 중의 실리콘 분말을 효과적으로 분리, 회수하는 방법에 대해 검토하였다. 폐실리콘 슬러지는 상당량의 절삭유와 소량의 철분말이 포함되어 있는데 절삭유는 유기 용매에 용해시켜 효과적으로 분리하였고, 철분말은 자력선별에 의해 제거하였다. 절삭유와 철성분이 제거된 잔사인 실리콘과 실리콘 카바이드의 혼합 분말로부터 초음파 분산 선별법을 사용하여 실리콘 분말을 효율적으로 분리회수 하였다.

  • PDF

Recovery of $\alpha$-iron from converter dust in a steelmaking factory (제철소 전노 dust로부터 철분강 회수에 관한 연구)

  • 김미성;김미성;오재현;김태동
    • Resources Recycling
    • /
    • v.2 no.2
    • /
    • pp.27-38
    • /
    • 1993
  • In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.

  • PDF

밀배아 분말첨가가 식빵의 품질특성에 미치는 영향

  • 김래영;전순실;서재수
    • Proceedings of the Korean Journal of Food and Nutrition Conference
    • /
    • 2000.12a
    • /
    • pp.51-51
    • /
    • 2000
  • 식생활의 서구화로 제빵 산업이 발달하고, 빵을 주식으로 하는 인구가 늘고 있다 또한 기존의 재료보다는 기능성이 첨가된 부재료를 활용한 건강 지향적인 식품의 수요가 증가하고 있는 추세이다. 최근 밀배아의 용도 다양화를 위하여 팔은 연구가 진행되고 있으며, 상업적으로 이용되고 있다. 소맥의 제분과정에서 부산물로 얻어지는 밀배에는 식물 중에서 가장 많은 천연 비타민 E 복합체가 이상적인 상태로 함유되어 있다. 밀배아에 들어 있는 비타민 E는 천연 비타민 E 복합체와 합성 비타민 E로 구분되어진다. 천연비타민E는 8가지 이성체를 가진 자연 비타민 E를 말하며, 4종류의($\alpha$$\beta$${\gamma}$$\delta$)의 토코페롤과 4종의 토코페롤의 복합체이다. 비타민 E는 사람을 포함한 고등동물에 필수적인 영양소로 식물성기름, 곡류, 배아 등에 많이 들어 있으며, 여러 이성질체중 $\alpha$-토코페롤이 체내에서 가장 생물학적 활성이 큰 것으로 알려졌으며, 생체막조직에서 인지질의 천연항산화제 역할을 하여 체내대사를 정상으로 유지하는데 큰 기능을 하는 것으로 보고되고 있다. 우리나라에서 식용으로 소비되는 밀은 거의가 수입에 의존하고 있으며, 밀배아는 거의 전량이 가축의 사료용으로 사용되고 있고 근래에 와서는 배아유, 배아떡, 복합 조미료, 쿠키, 배아를 첨가한 국수 등에 이용되고 있다. 따라서 본 실험에서는 식빵제조시 밀배아 분말을 0, 2, 4, 6, 8, 10%씩 첨가하여 기능성 식빵을 제조하였을 때의 반죽의 물성, 호화특성을 살펴보고 빵으로 제조하였을 때의 식빵의 품질 특성으로서 1차 발효 손실률, 굽기 손실률, 부피, 질감, 노화도, 관능적 특성 및 mould-free shelf life를 측정하였다.te, ferric citrate가 유제품에 사용하기에 적합한 것으로 나타났다. 생이용성을 평가하기 위하여 우유에서 low molecular weight components(ILC)를 분리하고 철분과 복합체를 형성시킨 다음, 철분 결핍된 쥐의 소장에서 loop을 형성시켜 ILC-철분 복합체를 injection하여 철분 흡수도를 조사하였다. Ferrous lactate 100ppm에서 약 25.6%흡수되었고 ferric citrate 100ppm은 24.7%, ferrous sulfate는 19.7%흡수되었다. ILC를 첨가하지 않은 100ppm 철분염 용액은 ferrous sulfate를 제외하고는 흡수도가 감소되었다. 철분 결핍된 쥐에게 gavage 방법에 의하여 철분강화우유를 투여하였을 때 철분 25ppm 시료에서는 ferrous sulfate가 12.5%로 가장 높았고 ferrous lactate는 8.1%, ferric citrate는 6.5% 흡수되었다. 철분 100ppm수준에서는 흡수율이 낮아져 ferrous sulfate는 25ppm 시료보다 절반이하 수준이었다. Ferric citrate는 차이가 거의 없었으며 ferrous lactate는 70%수준이었다. 이상의 결과에서 철분강화우유에 사용하기 적합한 철분염은 ferrous lactate, ferric citrate였는데 특히 ferrous lactate는 제품의 이화학적 품질, 생이용성 측면 모두에서 가장 좋은 것으로 나타났다.다 높았으며, 1회당 평균 8.1$\pm$5.1개의 난포란을 회수하였다. investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the inves

  • PDF