• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.736-743
• /
• 2016

In accordance with the trend of higher speed and automation, the Train Control System is building on the technology of control methods using radio in the technology of exchanging information by wire, toward a wireless communication method that will be applied using LTE-R radio communication technology with $4^{th}$ generation LTE mobile communication a $2^{nd}$ generation GSM-R. Therefore, a standard specification suitable for the Korea Radio based Train Control System-2(below KRTCS-2) for the 350km/h class using wireless communication is created; a prototype based on the standard specification is installed on a high-speed train and is installed on a test section(Ik san-Jeong eup) on the Honam high speed line to ensure the reliability and safety of the standard specifications, which are verified through various performance tests. In the future, the standard specification that has been established as a national railway standard, and the standard specifications will be commercialized by applying the train control system to conventional and High speed railway lines.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.105-114
• /
• 2016

With approximately 20 million transportation card data entries of the metropolitan districts being generated per day, application of the data to management and policy interventions is becoming an issue of interest. The research herein attempts a model of the possibility of dynamic demand change predictions and its purpose is thereby to construct a Dynamic Passengers Trip Assignment Model. The model and algorithm created are targeted at city rail lines operated by seven different transport facilities with the exclusion of travel by bus, as passenger movements by this mode can be minutely disaggregated through card tagging. The model created has been constructed in continuous time as is fitting to the big data characteristic of transport card data, while passenger path choice behavior is effectively represented using a perception parameter as a function of increasing number of transfers. Running the model on 800 pairs of metropolitan city rail data has proven its capability in determining dynamic demand at any moment in time, in line with the typical advantages expected of a continuous time-based model. Comparison against data measured by the eye of existing rail operating facilities to assess changes in congestion intensity shows that the model closely approximates the values and trends of the existing data with high levels of confidence. Future research efforts should be directed toward continued examination into construction of an integrated bus-city rail system model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.614-627
• /
• 2018

Urban railway lines have been constructed adjacent to residential buildings and urban areas. The expansion of transportation networks and reconstruction of residential buildings in highly populated urban areas require deep excavations in areas adjacent to urban railways. Mobilized soil stresses and changes in the groundwater level induced by deep excavations results in track irregularities in urban railways. In this study, a three-dimensional finite difference model using the commercial program FLAC3D was adopted to estimate the horizontal displacements of earth retaining structures, settlements of backfill, the stability of track irregularity and underground box structure based on the criteria of each railway organization and its relationships. In deep excavations, a change in groundwater level induces relatively very small differences for track gauge irregularities, whereas relatively large differences for longitudinal irregularities of 72.5%, twist irregularities of 83.3%, cross level irregularities of 61.9%, and alignments of 43.3% were found to be the maximum differences when the horizontal displacement of earth retaining wall and settlement of backfill were 65.1% and 21.4%, respectively, because the groundwater level (GWL) on the ground surface-mobilized tensile strength of the underground box structure exceeds the allowable value. Therefore, three-dimensional numerical analysis was performed in this study. Overall, real-time monitoring should be carried out to prevent railway accidents in advance when a deep excavation adjacent to urban railway structures is constructed.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.287-294
• /
• 2003

There are a lot of curved subway stations in Seoul metropolitan area. These must be straightly constructed as many as possible. But some of stations are roundly designed and built in order to avoid pre-existed underground obstacle such as basement of high rise building, underground gas or water pipe line and subway stations from another line. As shown fig 1, one of the biggest problem occurring curved subway station is considered large gap between platform and vehicle when vehicle completely stop at the station. The gap potentially is in existence to subway passenger as very dangerous factors in rush hours. If passenger accidentally drop their food or leg between this gap when they get on the train and train leaves station, the passenger will be seriously injured by vehicle. In this paper, various design and instruments are introduced and best solution for this matter will be presented. In order to eliminate any possibility of accident happened gap between platform and vehicle, KRRI(Korea Railroad Research Institute) have been developed new safety instrument. These technologies were applied for patent by KRRI. These mechanisms will provide confidence as well as safety to Korean subway passenger

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.539-546
• /
• 2016

It is over 12 years since the launch of Korea Train eXpress (KTX) services. Demand for the KTX has been on the increase continuously but few studies have been produced related to this phenomenon. KTX passenger demand has been constantly increasing due to influencing factors such as the expansion of network, rise of oil prices, etc. In this study, our main focus is to verify that there are other types of elements that are causing an increase in KTX demand; our approach looks at changes in social and psychological aspect that have occurred due to the reduction of travel time and cost, as well as the imposition of a five-day workweek. In other words, we considered diffusion theory in the marketing area, which affects product selection and purchasing attitudes, as a key factor that is causing passenger demand to increase. That is to say that it is hypothesized that the demand for travel on the KTX has increased due to the train's utility, which is spread by the diffusion effect Therefore, the Bass diffusion model was applied to explain the dramatic increase in KTX passenger demand. Based on this foundation, it was also discussed how certain marketing strategies that incorporate the diffusion effect should be considered variously for sustainable management of rail transportation, while considering a steady passenger demand.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.11-19
• /
• 2017

Since operation of railway trains is a major source of particle pollution in tunnel air, a particle removal device can be an effective measure to remove wear particles. To obtain design conditions of the particle removal device that will be installed underneath the railway trains, the wind speed and particle concentration underneath the trains were investigated using a three-dimensional ultrasonic anemometer and a DustTrak aerosol monitor, respectively. The measurements were made for the trains running on Seoul Metropolitan Subway Line 5 on February 10, 2015. The data were analyzed according to the track geometry (straight, curved) and train speed pattern (acceleration, cruising, and deceleration) between stations. Train speed was also analyzed. The average wind speed and $PM_{10}$ concentration underneath the trains were ~30% of the train speed and ${\sim}200{\mu}g/m^3$ for both straight and curved sections. Average $PM_{10}$ concentration for deceleration sections was higher than that for acceleration sections.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.589-599
• /
• 2014

This paper analyzes the forecasting errors of traffic volumes by comparing forecasted volumes for the opening year with the observed ones in the years after the urban railway construction in the metropolitan areas. The result shows that the average inaccuracy of traffic volumes for each station was estimated at around 7.27. Based on the confirmed factors of demand estimation errors, this study seeks for an alternative method to reduce estimation errors in feasibility studies. It is noted that there is a tendency that the inaccuracy varies by regions and the longer construction period or the shorter station spacing is, the overestimation increases. If urban railway projects are proceeded as planed, therefore, the level of the inaccuracy for traffic volume forecast will be decreased. In addition, thanks to the theoretical progress, recent estimation results show higher accuracy than before. In that sense, when we introduce the new railway line, it is necessary to make an accurate and realistic demand forecast based on actual outcomes and tendency of the previous estimation. The limitation of our study is that we only cover the errors of the initial period, the opening year and deal with the exogenous variables. Further research including other variables which might be considered to cause overestimation or errors would be needed for increasing the estimation accuracy of traffic volumes.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.98-113
• /
• 2014

The purpose of this study is to investigate the changes in the accessibility of the Metropolitan Seoul Transit systems since 2000, in which many new subway lines have been constructed as well as other urban transit lines have been connected to the systems. We suggest an accessibility measure model for Un-fixed Transportation Networks. In order to measure the nodal accessibility based on the mobility, we apply path-distance, physical-distance, and time-distance as the distance impedance measurement. Specifically, we develop time-distance algorithms to measure the time-distance between each pairs of transit stations based on the T-card transaction databases. We apply the model to the Metropolitan Seoul Transit systems in two time points(2005 and 2011). We examine the results in terms of three distance accessibility measures. Time-distance accessibility explains better the urban land use patterns in the Metropolitan Seoul area than the other two. We visualize the spatial patterns of time-distance accessibility by applying GIS, and analyze the spatial structures of accessibility in the Metrropolitan Seoul area between two time points.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.339-350
• /
• 2018

The rail wear measurements in urban underground railway have been analyzed to predict the particulate matter emission caused by rail wear which is one of the major sources of particulate matter emission for underground railway systems. From the rail profile variations measured in the interval of one and half year by dedicated rail wear measuring instrument over the commercial urban underground railway line, 'line-s' which is about 45km long, the characteristics as well as the amount of rail wear have been analyzed after dividing the whole line into about 170 section with radius of curve(R). It has been concluded that the vertical wear parameter V0 and corner wear parameter C0 have been selected to represent the wear amount of straight and curved rail respectively. The amount of rail wear as well as the particulate matter emission by rail wear over the whole line normalized by the rail length as well as the number of train has also been deduced from the relationship between the rail wear parameters and the amount of rail cross-section area.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1835-1847
• /
• 2011

After conducting demonstration of transportation card for bus from Godeok-dong to Sangil-dong in 1996, due to continuously support for public transportation, the transportation card utilization of metropolitan public transportation passengers is currently going beyond 90%. In the current situation, transportation information system is mainly focused on road operation and control, offer of real time information and research of transportation information system using transportation card data which is differentiated by previous transportation information system is needed to study. This paper compare and analyze transportation information system, which is being used to each country, based on foreign examples of activating use of transportation card then introduce figure of advanced transportation information system which provide decision making feature for improving policy and institution of public transportation based on transportation card data, scientific analysis of passenger information, information of demand forecasting, variation and so on for constructing new route.