• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.405-411
• /
• 2009

Railway signaling system in a rapid transit using the ATC system the approved a speed limit to a train and a part of signaling system in a metro approved a distance which is possible to move. Referring to the way of transmitting train control information, there are the one transmitting it to the on-board system of a train using the direct track, the another transmitting it establishing an instrument, and the other transmitting an instrument by a railway track. The one is the method using the direct track as a conductor for composing the part of the track and attaining the information controlling a train by transmitting a signal to the track. It is used for the high-speed railway and the subway. The method using the track attains information by transmitting it to returned information, and the on-board system of a train attains it by magnetic coupling. Because many reinforcing bars on the concrete slab track are used, interaction between a rail and a reinforcing bar that is not produced on ballast track is made. Due to the interaction, the electric characteristic of rail is changed. In the current paper, we numerically computed the coupling coefficient between the rail and the reinforcing bar based on the concrete slab track throughout the model related to the rail and the reinforcing bar using the concrete slab track that is used in the second interval of the Gyeongbu high-speed railway, and we defined the coupling coefficient not changed in the electric characteristic of rail in the condition that there is no interaction between the rail and the reinforcing bar.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.139-148
• /
• 2015

By increasing the vertical stiffness of the rail fastening system, the dynamic wheel load of the vehicle can be increased on the ballast track, though this increases the cost of track maintenance. On the other hand, the resistance acting on the wheel is decreased, which lowers the cost of the electric power to run the train. For this reason, the determination of the optimal fastener stiffness is important when attempting to minimize the economic costs associated with both track maintenance and energy to operate the train. In this study, a numerical method for evaluating the optimal vertical stiffness of the fasteners used on ballast track is presented on the basis of the process proposed by L$\acute{o}$pez-Pita et al. They used an approximation formula while calculating the dynamic wheel load. The evaluated fastener stiffness is mainly affected by the calculated dynamic wheel load. In this study, the dynamic wheel load is more precisely evaluated with an advanced vehicle-track interaction model. An appropriate range of the stiffness of the fastener applicable to the design of ballast track along domestic high-speed lines is proposed.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.47-51
• /
• 2006

Measuring the track geometry of a high-speed railway is the most important task in track construction and track maintenance work. Measuring accuracy is particularly sign the formulation of the maintenance plan and in the assessment of the work quality, and because it can set the train speed limit. To determine the track geometry of a high-speed railway, it is important to use KNR's track recording coach (EM-120). According to the result of the spectrum analysis, noise near the 1-m wave band was found on the track recording data. A new filter was thus applied to remove the noise from the track recording data. A similar result can be acquired when this method is used in real track geometry.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.189-195
• /
• 2002

궤도차량 운동의 실시간 시뮬레이션을 위해서 실시간 시간제약 조건을 만족하기 위한 모델링을 시도하였다. 단위 블록 열차로 연결된 전체 차체를 질점으로 가정하여 모델을 단순화함으로써 차량 설계 시 사용되는 궤도 차량 모델보다 실시간성을 향상시키고자 하였다. 당 모델에서 궤도차량의 운동은 트랙의 형상에 구속되는데, 차량의 운동 궤적은 궤도의 형상에 의해 결정된다. 단, 매 단위 시간마다에서 궤도 차량의 위치는 뉴턴의 제2법칙으로 결정된다. 본 모델링은 몇 개의 단위 트랙을 설정하여 이들의 조합으로 전체트랙을 설계할 수 있도록 사용자가 임의로 설계한 전체트랙에서 바로 실시간으로 시뮬레이션할 수 있는 특징을 갖는다. 당 궤도차량 운동 모델은 전동차, 철도, 롤러코스터의 궤도 설계 등에 사용될 수 있으며, 주 용도는 롤러코스터 게임 시뮬레이터에서 동 특성을 비교적 엄밀하게 시뮬레이션 하는데 있다.

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.253-262
• /
• 1998

본 연구에서는 경부고속철도의 주요 교량형식인 PSC 박스교량을 3차원 뼈대요소를 사용하여 모형화하였으며, 궤도불규칙성의 형상은 지수 스펙트럴 밀도함수를 사용하여 생성시켰다. 경부고속철도차량(K-TGV)중 동력차는 17자유도의 3차원 주행열차로 모형화하였고, 이러한 교량, 궤도불규칙성 및 차량 모형을 이용하여 교량과 차량의 상호작용을 해석할 수 있는 프로그램을 개발하였다. 동적해석을 위한 교량과 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였으며, 운동방정식의 수치해석에는 Newmark-β법을 사용하였다. 개발된 프로그램을 이용하여 동력차의 주행에 의한 교량의 시간이력곡선을 구하였으며, 궤도불규칙성의 영향을 분석하였다. 또한 도상의 유무에 따른 교량동적거동의 특성과 함께 열하중의 편심의 영향도 분석하였다.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.479-486
• /
• 2000

There has been recently an on-going effort in railway community to improve the dynamic performance of on-site railroad track with limited track possession time. In this paper, train running test lateral resistant force test and static/dynamic analyses are conducted before and after sprinkle of the ballast stabilizer in order to investigate the dynamic behaviors and parameters of the railroad track. Based upon the above results, effects of the stabilizer is verified, and a table for the track modulus representing on-site track condition and the methods to reduce the vibration and the transmitting forces of the ballasted track components to the infrastructures are suggested. It is thought that the suggestions made in this paper could be used as the preliminary data for the condition assessment and the maintenance of the track in the future.

• Magazine of RCR
• /
• v.19 no.2
• /
• pp.83-86
• /
• 2024

• Computational Structural Engineering
• /
• v.32 no.1
• /
• pp.5-14
• /
• 2019

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1397-1399
• /
• 2004

기존선 전철화, 철도시설물 정비사업 및 고속철도 연계 운행을 위한 우리나라의 전철화 구간용 궤도회로는 역 구내는 임펄스 궤도회로로, 역간은 AF 궤도회로로 선정하였다. 본 논문에서는 이들 궤도회로의 특성 및 역할을 열차운행속도와 안전측면에서 분석하였다.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.203-211
• /
• 2015

Ride comfort of a vehicle can be utilized to maintain the track geometry and track irregularities because ride comfort of the rolling stock is affected by the characteristics of the vehicle and track. Ride comfort was evaluated according to the measured floor acceleration data of vehicles for a Korean high speed line as well as European high speed lines using Continuous comfort method which can be applied to track maintenance. The exceedance distribution of the ride comfort was quantitatively analyzed by the vehicle speed, the ride comfort of the Korean high speed line was compared with that of European high speed lines. It is shown that the ride comfort of Korean high speed line is better than that of European high speed lines, which indicates that the Korean track geometry and track irregularities are properly maintained.