• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1646-1653
• /
• 2020

In case that the train driving with diverse high-speeds is manipulates by real-time remote control in long-term evolution-railway (LTE-R) system with frequent handovers, the real-time safe transmission of train control messages is important element. The handover delay time stability method regardless of train speed in order to enhance the real-time remote train control stability in LTE-R system is proposed in the paper. Furthermore, the variable speeds and altitudes of train collected by real measurements are applied for upgrading simulation accuracy. The simulation results inform that not only there are stable and unstable ranges to A3 offset values, but the optimal offset value for average handover delay is in unstable range. However, the late handover with A3 offset values in stable range should be chosen to get the predictable handover delay regardless of train speed rather than the early handover with A3 offset values in unstable range, since the key value of high-speed Korea railway system is the stability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.26-33
• /
• 2007

Social cost has been increased by traffic accident and congestion since early 1990s. The construction of roadways and railways has been suggested as countermeasures. However, ITS has finally introduced as a logical solution because the expenses of infrastructures are costly. The data collection field has developed through numerous researches and pilot projects. However the information provision field does need a lot of study. The traffic information broadcasting whether simple traffic information or the value-added information has been available via radio, television and internet which does not require tremendous investment compared with data collection stage. Therefore, this study reviews the suitability of the gadget service usually offered by window vista users which is the result of the development of technology and the changes of internet environment. It also suggests to using the RSS(Really Simple Syndication) manner as a basic method to provide the traffic information based on the needs of user in order to enhance the usability of traffic information. For this, this study analyzes the current methods and techniques of traffic information service which is widely available by local governments and companies and suggest possible changes and methods in order to provide Gadget-based service to the public.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2983-2988
• /
• 2010

The train control system used in Gyeongbu-line is classified in ATC, IXL and CTC. Domestic railway signaling systems are being developed by electrification. In these systems the electrification of interlocking reaches 57% and the safety equipments of railway crossings in trackside devices have completed their development into an integrated system. Block systems of all the existing sections have not yet electrified and integrated so that they need a number of complement in terms of construction and maintenance. For ABS currently used in existing domestic lines, and LEU being installed in Gyeongbu and Honam lines, although a train is controlled by the signaling information of the same train in the same location, the system is separately installed so that the same information is separately divided and transmitted at the each distinct system. Therefore, in the conventional ABS and LEU, there are a lot of duplicate installed compartments such as lamp detection and a power supply unit. Hence, we have a lot of problems: for maintenance, a lot of manpower and costs need to be invested and the overall manufacturing costs get higher, as well as the construction costs by duplicate. Therefore, this paper suggest design to develop an integrated electronic Block Control Unit by the integration of the currently used ABS, and communication and electronic technology. We are to monitor and manage the block systems in the corresponding station by integrating. And we are to transmit information together with LEU, which is an ATS wayside transmitter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.573-584
• /
• 2016

The train control system is a facility to ensure model-based design and safe train operation, and its safety is the most important factor for system introduction, complexity of the design information and traceability etc. Therefore, the model-based design and safety activities regarding the way-side equipment of a train control system is also highlighted. To solve this problem, In this paper, model-based design was carried out first to develop an effective train control system, which is represented by SysML(System Modeling Language). The test scenarios that can take advantage of the design model were created to improve the train safety control system. Case studies of a model-based design of a train-centric train control system were applied to the test scenarios; the results demonstrated its usability. The improved activity over the test highlighted the safety improvement approach, and it is expected to reduce the cost and time in the conceptual design of a future development model-based train control system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.543-550
• /
• 2018

The rapid growth of IoT technology induced by the fourth industrial revolution has resulted in research into various types of wireless sensors, and applications based on this technology are prevalent in many areas. However, among the various sites where this technology is used, railway bridges and tunnels with lengths of tens of kilometers have problems with data acquisition, due to the signal noise induced by the long distance measurement and EMI induced by the high voltage power feeding system, when conventional electric sensors are used. To overcome these problems, many studies on fiber optic sensors have been conducted as a substitute for the conventional electric sensors. However, restrictions on the types of fiber optic sensors have limited their application in railways. For this reason, a hybrid measurement system with IoT based wireless data communication, in which both electric and fiber optic sensors can be applied simultaneously, has been developed. In this study, in order to evaluate the applicability of the hybrid measurement system developed in the previous study, a real-time test for 4 types of measurement environments, which reflect possible railway sites, is performed. As a result, it was confirmed that the signals from both the electric and fiber optic sensors, which were acquired at a remote area in real-time, showed good agreement with each other and that this measurement system has the potential to handle sensors with a sampling rate of 2.5 kHz. In the future, it is expected that the IoT-based hybrid measurement system will contribute to the improvement of structural safety by enabling real-time structural health monitoring when applied to various measurement sites.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.835-842
• /
• 2009

DVB-SSP is a new broadcasting system for hybrid satellite communications, which supports mobile handheld systems and fixed terrestrial systems. However, a critical factor must be considered in upper layer decoding which including erasure Reed-Solomon error correction combined with cyclic redundancy check. If there is only one bit error in an IP packet, the entire IP packet is considered as unreliable bytes, even if it contains correct bytes. IF, for example, there is one real byte error, in an If packet of 512 bytes, 511 correct bytes are erased from the frame. Therefore, this paper proposed two kinds of upper layer decoding methods; LLR-based decoding and hybrid decoding. By means of simulation we show that the performance of the proposed decoding algorithm is superior to that of the conventional one.

• The KIPS Transactions:PartA
• /
• v.18A no.5
• /
• pp.215-224
• /
• 2011

In this paper, a mechanism connecting all weighted migration routes with minimum cost with EGOSST is proposed. Weighted migration routes may be converted to weighted input edges considered as not only traces but also traffics or trip frequencies of moving object on communication lines, roads or railroads. Proposed mechanism can be used in more wide and practical area than mechanisms considering only moving object traces. In our experiments, edge number, maximum weight for input edges, and detail level for grid are used as input parameters. The mechanism made connection cost decrease average 1.07% and 0.43% comparing with the method using weight minimum spanning tree and weight steiner minimum tree respectively. When grid detail level is 0.1 and 0.001, while each execution time for a connecting solution increases average 97.02% and 2843.87% comparing with the method using weight minimum spanning tree, connecting cost decreases 0.86% and 1.13% respectively. This shows that by adjusting grid detail level, proposed mechanism might be well applied to the applications where designer must grant priority to reducing connecting cost or shortening execution time as well as that it can provide good solutions of connecting migration routes with weights.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.398-398
• /
• 2018

OECD 발표에 의하면 물산업 관련 인프라 투자 전망은 전세계 GDP 대비 2010~2020년 약 1.01%에서 2020~2030년 약 1.03%로 확대될 전망으로 다른 통신, 전력, 철도 인프라 투자수요보다 많을 것으로 전망하고 있다(파이넨셜 뉴스, 2013.3.21.). 우리나라는 2005년 베트남 홍강종합개발사업을 시작으로 2015년 기준으로 세계 35개국에 진출하고 있다. 그러나 대부분의 물 산업 진출 대상 국가는 미계측 유역이 많고 지상에서 계측된 수문 자료가 부족한 실정이다. Namgung and Lee(2014)에 의하면 네팔의 수력발전소 건설에 관측된 강우량 자료가 없어 발전소 하류 10km 지점의 유하량 자료를 이용하여 자료의 정확도 검증을 대신하여 적용한 바 있다. 이와 같이 계측자료가 없거나 부족한 지역에 대하여 기상 위성을 이용하여 추정된 강수량 자료가 해당 지역의 강수 특성을 파악하는데 중요한 자료로 이용될 수 있다. 글로벌 위성 기반의 강수량 관측에 대한 역사는 1979년에 IR방법에 의해 위성으로부터 강우자료를 유도하는 개념이 도입된 이후 1987년 다중 채널의 마이크로파(MW) 복사계를 이용한 방법, 이후 두 IR과 MW를 혼합한 방법에서, 1997년 TRMM위성의 PR(Precpipitation Radar)의 레이더를 이용하는 방법, 그리고 2014년 GPM 핵심 위성(GPM Core Observatory)에 탑재된 Dual PR에 의한 방법으로 위성강수의 정확도를 매우 높여가고 있다. 본 연구는 KOICA 사업으로 진행중인 필리핀 메트로 마닐라 홍수조기경보 및 모니터링 체계 구축사업 중 파시그-마라키나강(Pasig-Marakina) 유역의 2012년 8월의 홍수사상에 대한 위성강우 및 글로벌 지형자료를 이용하여 홍수 유출량을 추정하는 것으로 목적으로 하고 있다. 유역내 6개 관측소의 일일 강우량 자료와 GPM IMERG 일강우량 자료 상관분석 결과 약 0.623, Bias는 -0.147, RMSE는 15.7정도로 분석되었다. 홍수량 분석은 2012년 8월 홍수가 발생한 시기인 2012년 8월 1일 00(UTC)부터 2012년 8월 16일 00(UTC)까지의 1시간 간격의 위성강우자료와 글로벌 지형자료를 이용하였고, 한국건설기술연구원의 MapWindow 기반 GRM 모형(mwGRM)을 이용하였다. 분석 결과 첨부홍수가 발생한 시기는 8월 7일 18:00(UTC)였고, 첨두 홍수량은 $4,073.9m^3/sec$로 분석되었다. 향후 수위-유량 관계식에 의해 정확도평가를 수행할 계획이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.149-156
• /
• 2021

This study collected and analyzed case studies related with the use of spatial information in North Korea to prioritize construction and required supporting processes in order to propose a short-term and long-term road map for the establishment of spatial information in North Korea. Recent research cases related to the prioritization of spatial information development were analyzed, and priority for the construction of infrastructure was derived based on the interconnectedness and relationship of national infrastructure. Due to the inaccessibility and remoteness of North Korea, all of the five studies determined priorities according to questionnaires and consulting of refugees and knowledgeable figures by expert groups. In summary, priority was given to unarmed and transborder areas, major cities, special zones, and development zones, while in terms of facilities, priority was given to power communication, railroads, water and sewage architectural buildings, roads, and dams. In the case of prioritizing the establishment of national infrastructure for the unified Korean Peninsula, the development of major areas, ports, and the related city-level spots to develop a line that promotes the sharing of routes such as transportation networks, water, and energy, thus leading to a scenario involving the development of cotton at an urban and national level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.317-323
• /
• 2008

Mass transit information can contribute many benefits to users. Especially, transportation information technology is developing highly with information technology in Korea recently. Hereafter, it is expected to give customized transportation information to users individually with the advent of ubiquitous age in earnest. This public transportation information service can be realized by path finding algorithm in public transportation networks including travel and transfer attributes. In this research, constraints are constructed with the primary facts influencing users. Moreover, the method reducing user's path finding condition arbitrarily is proposed by making the maximum value as variables. In this study, transfer frequency, total travel time, seat confirmation, transfer time and travel time become constraint condition based on k path finding algorithm considering service time constraint condition. Moreover, case study about user customized transfer information is performed in Seoul and metropolitan subway networks.