• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.54-59
• /
• 1996

시속 300km로 주행하는 고속철도 열차의 주행안정성 및 승차감을 확보하기 위해서는 열차하중을 고려한 정교한 정적, 동적해석 및 설계가 이루어져야 한다. 따라서 차량과 궤도의 동적상호작용 및 차량과 교량의 동적상호작용, 터널의 미기압 및 공기압, 대단면 터널굴착의 안정성평가, 열차주행에 의한 지반진동의 예측 등에 전산수치해석기법의 활용 및 개발이 현재 활발히 이루어지고 있다. 그러나 고속철도 보유국을 포함한 선진국들에 비하면은 이러한 전산수치해석분야에 있어서 아직도 더 많은 연구 및 개발이 본 공단을 포함하여 학계 및 연구소에서 이루어져야 하겠으며, 본 경부고속철도 건설사업으로 인하여 차량, 전기시설분야의 각종 첨단기술개발 및 발전과 더불어 하부 토목구조물의 건설 및 설계 해석분야에 많은 발전이 기대된다 하겠다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.455-460
• /
• 2020

The governments of Korea, China, and Japan have operated comprehensive research institutes for railway technologies. Korea Railroad Research Institute (KRRI), China Academy of Railway Sciences Corporation Limited (CARS), and Railway Technical Research Institute (RTRI) are representatives of comprehensive railway research institutes in each country. KRRI was found to be the most advanced in the quantitative competitiveness of patents. In terms of qualitative competitiveness, KRRI has strength in civil engineering, whereas RTRI has strength in electricity. KRRI was found to have the greatest efforts in securing competitiveness in overseas property rights. By comparing the publication of papers, CARS published the most papers. On the other hand, from 2015, KRRI showed an upward trend and published the most papers. By examining the impact of the papers by the citation, KRRI was found to have higher competitiveness than the other two institutions. In the future, it will be necessary to perform big data analysis on patents and papers of the three organizations, derive the key research areas and promising technology areas for each institute, and establish a mid-to-long-term development plan for railway technology based on scientific evidence.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.679-684
• /
• 2017

Recently, the speed of high-speed railway has been rapidly increase with the development of high-speed train design and operating technology. This causes a lot of complaints related the environmental noise in residential areas near the high-speed railway. In order to operate the high-speed railway in accordance with the design speed, noise reduction technology should be developed to meet the noise characteristics of high-speed railway. And it is important to develop the prediction technology by grasping the noise radiation characteristics. In order to meet these requirements, in recent years, infra-research for 400 km/h high speed railway has been conducted. Reliable noise prediction and noise reduction techniques have been developed through this study. This paper is concerned with wind pressure safety and noise performance evaluation of the newly developed 400 km/h noise reduction device. The wind pressure safety and The noise performance of the developed device was confirmed by this paper.

• Electronics and Telecommunications Trends
• /
• v.27 no.2
• /
• pp.41-50
• /
• 2012

최근 녹색 에너지 기술이 전 산업계에 걸쳐 화두가 되고 있는 가운데, 고에너지 효율 교통수단으로 철도의 가치가 부각되고 있다. 전통적인 기계식에서 전자식으로 발전해 온 열차제어 방식에 무선통신 기술을 도입하여 철도신호 분야에 혁신을 가져옴으로써 열차운행의 안정성이 향상되었고, 더욱 정밀한 열차제어기술로 운행 중 열차 간 간격을 줄이는 것이 가능해짐에 따라 전체 노선의 이용 효율을 높일 수 있게 되었다. 본고에서는 무선통신 기반 열차제어시스템에 대하여 소개하고, 현재 사용중인 무선통신 기반 열차제어시스템의 종류와 표준화 현황에 대해 다룰 것이다. 그리고 철도 운영 현장에서 요구되고 있는 다양한 기능들을 지원하기 위해 고려되고 있는 차세대 열차제어용 무선통신 기술인 LTE-R에 대한 기술동향을 살펴보고자 한다.

• Transportation Technology and Policy
• /
• v.13 no.6
• /
• pp.6-9
• /
• 2016

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.657-665
• /
• 2019

The domestic railway parts and equipment manufacturing industry is mainly focused on SMEs, and the majority of them are suffering from profitability because they cannot build economies of scale. Besides, they have survived in the form of importing technology products from overseas advanced countries and delivering them to domestic railway operators rather than having in-house technology. Therefore it is necessary to study whether the problems of the current railway industry can be identified and improved and at the same time, whether the government's railway industry development policy is properly reflected. literature studies related to technology commercialization, and conduct surveys of AHP questionnaires on the experts of the manufacturing industry of SMEs, academics / research institutes of the railway industry. After that, the Level 3 activation method AHP analysis was additionally performed on the important factors of Level 2 that have the highest importance and priority in Level 1. As a result of the AHP analysis, 'Technical Connectivity' was the most important method in the technical factor, and SME experts and academic and research institute experts were highly evaluated for 'commercialization ability' Competence in terms of importance. As for external support factors, it was analyzed that SME experts "support for manpower development" was important, while the other two group experts research and development support was important. In this study, the priority of the government support and policy priorities are suggested according to the capabilities of the railway manufacturing SMEs before the future R&D support.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.387-391
• /
• 2002

1899년 공중의 운송수단으로 철도가 우리 생활속에 자리잡은지 100년이 지났으며, 현재는 시속 300km에 육박하는 고속철도가 준공되고 있는 실정이다. 그러나 철도기술이 발전됨에 따라 안전사고도 증가하여 많은 인명상, 재산상의 피해를 초래하고 있다. 2000년 의 철도사고는 572여건에 225명이 사망하고 347명이 부상을 입었다. 이러한 수치는 1998년을 기점으로 점차로 줄어들고 있는 추세이나 아직까지도 재해의 원인을 살펴볼 때 안전수칙 미준수나 기계기구의 취급부주의와 같은 후진국 수준의 원인이 큰 비중을 차지하고 있는 실정이다. 모든 산업사고는 재해조사표에 근거하여 재해를 분석하고 있으며, 이의 결과는 동종재해 및 유사재해의 재발방지 수립대책으로 활용되어야 한다. 따라서 본 연구에서는 산업재해조사표를 기준으로 FTA분석을 실시하여 철도사고에 대한 보다 객관적이고 체계적인 원인을 규명하고자 하였다.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.374-390
• /
• 2004

In this paper, I illustrate the situations and problems rail industry is faced with. The rail industry has been suffering deficiency in investment with low technical level. Lacks of strategic marketing plans and low competitiveness in the industry led to a small portion of modal share, estimated at 12.6% in 2001(person base). Recently, rail industry has caught up with the current flow of changes. For example, a prototype of Korea high speed train had been manufactured to be successfully tested on commercial track. And the amount of rail investment increased gradually. The rail industry of EU nations, America, Japan reveals good outcomes, which keeps the balance in the black thanks to growth of investment in rail and high technical level. I have come up with some ideas for improvement, which I believe will be helpful to lead the rail industry. First, I suggest the upbringing of rail industry and technology on a national level. Second, expanding the rail network with the rail modernization. Lastly, I think it is crucial to establish a law and institution before we advance into overseas markets.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.83-89
• /
• 2021

With the recent development of information and communication technology, there have been many attempts to apply various IT technologies in the railway field. Until now, the safety control system has been installed at the site and operated using actual data, but there is a problem that it is difficult to verify the function of the railway safety control system in that no accidents occur in real situations. In this study, accident data is generated randomly to verify that the safety control system is functioning properly, and to this end, simulation data is prepared according to the simulator, accident scenario and scenario. Real-time railway safety monitoring system collects and transmits data from interface devices to common protocol called DDS.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.469-480
• /
• 2006

The goal of this study is to ases the static and dynamic behavior of disk bearings under railway vehicle loadings. Several static tests were conducted in a laboratory t bearings, all having the same kind of polyurethane disk as used in the static tests, were installed under a full-sized railway bridge and tested with a running locomotive, the tests results, the static and dynamic stiffness of the disk bearings were estimated and compared. the deformation of the disk bearings under the bridge was measured at varying disk bearing was almost half of that under dynamic loading. In addition, the dynamic stiffness of the fixed disk bearing was 80% higher than that of an expansion disk bearing, since the PTFE in the expansion bearing is displaced. The deformation of the disk bearing did not vary significantly with changes in locomotive's speed. The results of this study can contribute to fast-tracking the formulation of a design technique for disk bearings for railway bridges.