• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.607-612
• /
• 1993

원심분리기는 용액 속에 있는 물질을 크기와 밀도 및 모양의 다름을 이용하여 용액으로부터 분리, 정제 및 순화하는 과학기계이며 처리량의 규모에 따라 공업용과 실험실용으로 분류된다. 공업용은 처리량이 많은 반면 실험실용은 처리량이 적으나 분리효과가 좋은 특징을 갖으며 회전속도에 의해 저속, 고속 및 초고속의 원심분리기로 나뉘어진다. 초고속 원심분리기는 최초(30년대)에 침전계수의 측정을 목적으로 연구개발을 시작하였다. 이의 용도에서 사용되는 초고속원심기를 분석용 초고속원심기라 부르나 이는 50년대 이후에 점차적으로 기술적 발전을 가져와 미소물질 분리를 위한 분리용 초고속원심기로 변천이 되어 생물학분야 이외에 항공기,선박,고속철도,석유탐지,원자력,섬유공업과 반도체등 여러 분야에 이용이 되고 있다.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.1
• /
• pp.27-34
• /
• 2001

On 16Dec. 1999, It was 100 years since the opening the first railroad section of 33.2km on Sep. 1899, Korea High Speed Railroad had a successful trial run of 200km/h on test track section. And the test speed 300km/h was achieved an 28 June 2000 during continuous commissioning. In the 21st century, the High Speed Railroad will be opened commercially in Korea and will contribute to technical development. Now, it is necessary to re-evaluate the role of railroad in modern society and to activate the railroad system. Ultimately, the competitive power of nation will be strengthened with energy saving, reduction of pollution and transportation cost. It conclusion the railroad system have to be expaned about 50% of total transportation to make preparations for reopening of Eurasia silk route through KyungEu railroad connection.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2527-2538
• /
• 2011

The Reliability started for MILitary purposes during World War II in 1942, getting more important for maintenance, safety, etc in modern society. As technologies develop, also international standards for measuring the reliability is advancing. RAMS activities for maintenance, safety verification is material to national railroad. And for this, it needs quick response for the changes of standards. Even now standards are upgrading for developing electronic technologies. Therefore analysis of failure rate's trend about such standards is judged necessary. So We submit a this paper for comparative analysis of changing process standards according to development of electronic technologies and reliability. At first, we compared actual usage ratio of standards for understanding the current state of usage. Based of these state of usage, discuss the major standard. And then, introduced reliability standards's trend, calculation method of failure rate and difference of failure rate calculation standard according to march of time. In this paper, used standards are MIL-HDBK-217F, Telcodia, etc.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.967-973
• /
• 2009

Construction and Transportation R&D budget is increased every year. Therefore, outcome is important issue. Also, we must try for practical use of outcome. And we need strategy for practical use of outcome. This is research for the application of research and development outcome. Specially, this research studies about way for construction standard. And this proposes a institutional improvement. First, it catch a problem point with present condition analysis. Second, It executes a survey and analysis. Finally it presents some policy suggestion. This research solves two problems. This applies to the field of research and development outcome. Another this amend construction standard.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.398-403
• /
• 2008

The propulsion for locomotive application has changed from the DC motor system to the induction motor system. Although the induction motor system has almost reached the stage of maturity, this system also needs to be changed to the PM motor system for the direct drive without using reduction gear. Thus, the IPMSM (Interior buried Permanent Magnet Synchronous Motor) has been adopted to meet the locomotive driving specification. Where the wheel is directly dirven by the traction motor. In this paper, the investigation on IPMSM satisfying driving specifications for the direct drive has been performed using the advanced FEM.

• Journal of Korea Entertainment Industry Association
• /
• v.5 no.1
• /
• pp.122-126
• /
• 2011

In this paper, for the purpose of improving the future domestic train control systems and securing interoperability according to the global development trends of train control systems, we present the test results of interoperability between wayside train control system installed in existed line, and the onboard train control system. Due to the safety-critical characteristics of train systems, the site test in the section where the wayside equipment is installed, leads to a danger against safety. Therefore, by way of constructing a simulation environment of train control systems, we confirm the T/R data systems of the equipment for interoperability and test the interoperability by applying these systems to onboard equipment.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.349-354
• /
• 2014

Other foreign countries already apply ETCS LEVEL 2 in signaling systems. It provides added functions to control a train using wireless communication compared with ETCS LEVEL 1. Nowadays, the ETCS LEVEL 2 system is being applied on revenue services more and more frequently. Therefore, it is necessary to develop ETCS LEVEL 2 to apply in this country. The advanced technology of the ETCS LEVEL 2 system provides continuous control for train protection, and ATP function, by comparing discontinuous controls on ETCS LEVEL 1. ETCS LEVEL 2 is a better system model for improving passenger safety. This paper describes the design of an onboard speed profile for the ETCS LEVEL 2 system and it forecasts the future of ETCS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.881-893
• /
• 2008

The major objective of this study is to investigate the fatigue damage factor evaluation of immovability crossing for railway turnout by the field test and qualitative analysis. From the field test results of the servicing turnout crossing and qualitative analysis with frictional wear which section stiffness decreased, it was evaluated fatigue life of servicing turnout crossing. Most design practices have not taken advantage of the advanced theories in the modern fracture mechanics and finite element analysis due to complexity of analysis as well as the large quantity of vaguely defined parameters in actual designs. This paper considers fatigue problems in turnout crossing using effective analytical and design tools from the field of qualitative constraint reasoning. A set of software modules was developed for fatigue analysis and evaluation, which is easily applicable in engineering practices of designers. The techniques enable the use complex analysis formulations to tackle practical problems with uncertainties, and present the design outcome in two-dimensional design space solution. Appropriate engineering assumptions and judgments in carrying out these procedures, often the most difficult part for practicing engineers, can be partially produced by using qualitative reasoning to define the trends and ranges, interval constraint analysis to derive the controlling parameters, as well as design space to account for practical experience.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.656-662
• /
• 2011

Recently, rolling stock technology has rapidly developed. Nevertheless, ride quality and vibration vibration on vehicle still need more study. EMU to be operated on SMRT Line 7(SR001) extension section is applied to oil-free reciprocating air compressor considering maintainability and convenience of inspection. But reciprocating air compressor compresses the air by back-and-forth motion of piston, and spreads the vibration to surrounding structures by its force of inertia. Optimum design of mounting bracket is able to reduce the vibration. As a result, we analyzed the frequency spectrum on vibration upon value by measuring vibration during operation of air compressor. On this study, we comprehend the vibration transmission process of reciprocating air compressor and consider the measure for reducing vibration by minimizing propagation of vibration.

• Korean Business Review
• /
• v.21 no.2
• /
• pp.137-170
• /
• 2008

This study is presenting the logistics strategy in the international logistics markets which makes competition and corporation among north-east Asian countries to establishing the multi-pass Eurasian railroads. The countries located in north-east area of Eurasia like China, Japan, Russia and Korea are paying higher costs and disutility to the transportations and communications due to repeated conflicts and confrontations causes from the politic problems. They are being used surface transportation for most of all logistics between Europe and Asia except special merchandises because of characteristic of cargo to be air, the Silk Road remains vestige only which was main logistic passage to this area since BC. So far the Trans-Siberian Railway is being used by Russia mostly as north of Eurasian transport because of difficulties of service. The Trans-China Railway built in 1992 is not accomplishing as a international logistic passages. It is expected to take a long lead time because of characteristic of resource development and poor logistic infrastructure to the countries like Uzbekistan, double landlocked country, Mongolia and Azerbaijan, the countries do not be adjacent to the sea, even they have great economic jump-up plans through the development of their own resources. The Shanghai Cooperation Organization(SCO) start to sail officially in 2001 is constructed with China, Russia, Tadzhikistan, Kyrgyzstan, Kazakhstan and Uzbekistan as regular members of 6 countries and Mongolia, India, Pakistan, Afghanistan and Iran as observers 5 countries. It is started as a military alliance to protect terror, but now, it is expended to cooperate with the traffic, transportation, trade and share of energies. The Russia is doing their best to activate TSR as a government target to developnorth area equivalently, and economic develop of far-east Siberia. And also it is agreed provisionally to improve and repair of rail road between Nahjin and Hassan to connect TSR and TKR( Trans-Korea Railroad) by Russia, North Korea and South Korea with Russian's aggressive efforts. The development plan of this area is over lapped with GTI(Greater Tumen Initiative) promoted by UNDP, and is a cooperated project by 5 countries of South Korea, Mongolia, China, Russia and North Korea, subject to review the appropriation of energy, tour, environment, rail road connection between Mongolia and China and establishing a ferry route to north-east Asia. It is Japanese situation to pay attention to Russia and China even they have been supplying large-scope of infrastructure in Mongol area without any charges, target to get East Asia Main Rail Road to connect Mongolia and Zalubino of Russia. In case of the program for the Denuclearization of North Korea is not creeping, it will be accelerated to connect the TKR and TSR, TKR and TCR by somehow attending United States, including developing program promoted by UN ESCAP. As the result, Korean peninsular will continue the central role of competition and cooperation as in the past, now and future of north-east Asia, as of geographical-economics and geographical-politics whether it is requested or not wanted by neighbor countries.