• 오토저널
• /
• 제14권3호
• /
• pp.109-114
• /
• 1992

The purpose of this study is to experimentally research the effects of polymer additives on turbulent transition of Couette flow between concentric cylinders when outer one is rotating and inner one is at rest; the diameter ratio being 0.2. Aqueous polymer solution generate the degradation phenomena in machine forming work, but this is not effected in about 10 minute at 5ppm. aqueous polymer solution testing. The Reynolds number, referred to the gap distance and rotation velocity of the outer cylinder, of turbulent transition is about 20000 for water flow. In the laminer region, the torque value is as same as theoretical one in the region of low Reynolds number, but becomes high with an increase in the Reynolds number. The polymer additives reduce the Reynolds number for turbulent transtition. In the turbulent region, the torque is remarkably reduced by the polymer additives, soluble polymer take down effect of turbulent transition boundary torque.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.62-74
• /
• 1994

This paper addresses on the model synthesis and performance analysis of an engine mount featuring electro-rheological(ER) fluids which undergo a phase change when subjected to electric fields. A novel type of ER fluid-filled engine mount is devised and its hydraulic model is constructed. An equivalent mechanical model is subsequently obtained from the governing equation of the hydraulic model. The model parameters associated with the ER fluids are distilled from experimental investigations on the Bingham properties of the fluids. The distilled data are then incorporated into the governing model to undertake feasible work through computer simulations,. It is shown that the proposed engine mount has an inherent capability of controlling both the damping force and the resonance frequency. Other superior performance characteristics accrued from the proposed methodology are also evaluated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.50-54
• /
• 2002

With a view to estimating the effect of flows on evolving sprays and combustion in ramjet combustor and corresponding extent of combustion, ram air flows in combustion chamber is numerically experimented. Preconditioned three dimensional Navier-Stokes system of equations per transient, compressible, turbulent flows in IRR(Integral Rocket Ramjet) combustor is numerically integrated. Flow properties in the side-dump ramjet combustor, rectangular duct with two 60-deg curved inlets located radially at an angle of 180-deg, are addressed in terms of mixing quality and extent of combustion efficiency.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.253-256
• /
• 2009

과팽창 상태 추력 노즐 내부의 측력(Lateral Force)발생에 대한 기초적 연구 분석을 실험적, 수치 해석적 방법으로 수행하였다. 엔진 정지 과정시 추력 노즐 내에 발생하는 압력진동을 조사하였다. 구동 압력비 변화에 따른 벽 압력 분포를 측정 및 쉴리렌 가시화를 수행하였다. RSS(Restricted Shock Separation)에서 FSS(Free Shock Separation)로 천이하는 순간 벽 압력 피크값이 발생하였다.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.36-41
• /
• 2011

Analysis of two-dimensional flow in an involute gear pump has been done by using FLUENT. Analysis extended to the turbulent flow includes the mass flow rate with functions of pressure difference between inlet and outlet, rotational velocities of involute gear, and clearances between tip of gear and housing. In general mass flow rate decreases with decreasing rotational velocity, and with increasing clearance and pressure difference. The flow rate efficiency of gear pump, which is defined with the theoretical flow rate, has been presented in terms of the above parameters.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.452-457
• /
• 1993

For the calculation of transonic laminar relative flow fields on the axisymmetric H-S and B-B stream surfaces in turbomachinery, a finite volume method developed in Part (I) is extended. Energy equation is replaced for simplicity by the condition of constant rothalpy throughout the flow fields. For axisymmetric H-S flow the circumferential componets of absolute velocity are given in advance so that this component of momentum equations can be neglected. Some numerical results show good agreement with experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.78-85
• /
• 2011

The Vortex-In-Cell(VIC) method combined with panel method is applied to the analysis of incompressible unsteady viscous flow. The dynamics of resulting flow is governed by the vorticity transport equation in Lagrangian form with vortex particle representation of the flow field. A regular grid which is independent to the shape of a body is used for numerical evaluation based on immersed boundary technique. With an introduction of this approach, the development and validation of the VIC method is presented with some computational results for incompressible viscous flow around two or three dimensional bodies such as wing section, sphere, finite wing and marine propeller.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1992년도 제16회 학술강연회초록집
• /
• pp.13-18
• /
• 1992

대형 틸팅패드 저어널베어링은 고속안정성 특성이 우수한 베어링으로서 시스템의 안정성이 매우 중요시되는 터빈발전기 등 대형 고속 회전기계에 많이 사용되고 있다. 그런데 이들 대형 저어널베어링에서는 유막의 온도상승이 매우 많고, 유체의 흐름이 거의 난류영역에 이르기 때문에 베어링의 운전특성을 정확하게 예측하기가 어려운 실정이다. Hopf & Schuler는 대형 틸팅패드 저어널베어링에 대한 실험적 연구에서 유동상태에 따라 베어링의 온도분포가 서로 달라진다고 발표하였다. 대형 틸팅패드 저어널베어링은 구조적으로 유동상태가 복잡할 뿐만 아니라 계산과정도 까다로운 편이어서 온도상승과 난류를 고려하여 엄밀하게 운전특성을 예측한 연구는 거의 없다. 따라서 본 연구에서는 대형 틸팅패드 저어널베어리으이 운전특성을 보다 엄밀하게 예측하기 위하여 3차원 적으로 유막의 점도변화 및 패드에서의 열전달을 고려하고, 와점성계수를 이용한 난류윤활이론을 사용하여 유막의 온도상승 및 난류가 베어링의 온도분포, 부하능력, 마찰손실 등의 운전특성에 미치는 영햐을 보다 엄밀하게 제시하고자 한다.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.814-822
• /
• 1986

본 연구에서는 이러한 점에 착안하여 비가열수직이상유동계에서 전도Probe 를 이용하여 시간평균보이드율을 측정하여 이들로부터 통계적으로 처리된 확률밀도함 수(PDF)분포와 이와 관련된 일련의 모우멘트계산을 시도 하므로써 유동양식과 천이특 성에 대하여 객관적이고 체계적인 해석을 하였다. 또한 학계 및 산업계에서는 측정 기구의 단순화가 요구되므로 전도Probe의 출력신호를 분석하여 유동양식에 따르는 특 성을 아울러 구명하였다.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.130-138
• /
• 1996

The transient incompressible flow behind the widely-spaced co-axial jet is numerically simulated using the random vortex method(RVM). This numerical approach is based on the Lagrangian approach for the vorticity formulation of the unsteady Navier-Stokes equations, utilizing vortex elements to account for the convection and diffusion processes. The effects of the mass flow rate of an annular air jet and a central fuel jet on the co-axial jet flow dynamics is investigated. To validate the present procedure, the numerical results are compared with the available experimental data the present procedure, the numerical results are compared with the available experimental data in terms of the centerline and off-centerline profiles of the mean axial velocity. Discrepancies between the RVM results and the measurements are discussed in detail.