• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.110-115
• /
• 2014

It is crucial for important facilities to withstand strong earthquakes because their damage may cause undesirable socio-economic effect. A liquefied natural gas (LNG) receiving terminal is one of the lifeline facilities whose seismic safety needs to be guaranteed. Even though all operating LNG receiving terminals in Korea were seismically designed, old design codes do not guarantee to comply with the current seismic design codes. In addition, if the constructional materials have been deteriorated, the seismic capacity of facilities may be also deteriorated. Therefore, it is necessary that the seismic performance of LNG receiving terminals is evaluated and the facilities that lack of seismic capacity have to be rehabilitated. In this paper, a procedure of seismic performance evaluation of such facilities is developed such that the procedure consists of three phases, namely pre-analysis, analysis, and evaluation phases. In the pre-analysis phase, design documents are reviewed and walk-on inspection is performed to determine the current state of the material properties. In the analysis phase, a structural analysis under a given earthquake or a seismic effect is performed to determine the seismic response of the structure. In the evaluation phase, seismic performance of the structure is evaluated based on limit states. Two of the important facilities, i.e. the submerged combustion vaporizer (SMV) and pipe racks of one of the Korean LNG receiving terminals are selected and evaluated according to the developed procedure. Both of the facilities are safe under the design level earthquake.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.93-97
• /
• 2005

Sea operation monitoring system is a system for the automatic ship operation that is used on the variety sea operations such as laying optical cables on the sea between the countries, laying cables on the seabed for a remote island, laying pipelines for the natural gas, and so forth. This system processes data which optained through setting up environment and input from several sensors, and display GPS information with ENC data. And this system processes not only data of root file about sea operation, but also realtime information from PDA of client wirelessly connected with AP on wireless LAN, In addition, this system can improve efficiency of the operation as a result of enabling free movement within valid range. This paper design and Implementation Monitoring system from above appropriate to the embedded system, and improve competitive power of ship through prevention of a ship accident, to keep minimizing operation loads and support both the automatic ship operation and the safety voyage.

• Environmental and Resource Economics Review
• /
• v.11 no.2
• /
• pp.211-231
• /
• 2002

This paper summarizes the results of a study that assess how a demand side management (DSM) system addresses key economic and environmental challenges facing in the Korean natural gas sector considering; ${\bullet}$ high discrepancies of seasonal consumption volume and of load factor in unmatured domestic LNG market, ${\bullet}$ unfavorable and volatile international LNG market, imposing with the contestable "take-or-pay" contract terms, ${\bullet}$ low profile of LNG and existence of market barriers against an optimal fuel mix status in the industrial energy sector. A particular focus of this study is to establish an 'extended' DSM system in the unmatured gas market, especially in industry sector, that could play a key role to assure an optimum fuel mix scheme. Under the concept of 'extended' DSM, a system dynamics modeling approach has been introduced to explore the option to maximize economic benefits in terms of the national energy system optimization, entailing different ways of commitments accounting for different DSM measures and time delay scenarios. The study concludes that policy options exist that can reduce inefficiencies in gas industry and end-use system at no net costs to national economy. The most scenarios find that, by the year 2015, it is possible to develop a substantial potential of increased industrial gas end-uses under more reliable and stable load patterns. Assessment of sensitivity analysis suggests that time delay factor, in formulating DSM scenarios, plays a key role to overcome various market barriers in domestic LNG market and provides a strong justification for the policy portfolios 'just in time' (time accurateness), which eventually contribute to establish an optimum fuel mix strategy. The study indicates also the needs of advanced studies based on SD approach to articulate uncertainty in unmatured energy market analysis, including gas.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.193-200
• /
• 2007

Natural gas is one of the most promising alternatives to gasoline and diesel fuels because of its lower harmful emissions, including $CO_2$, and high thermal efficiency. In particular, natural gas is seen as an alternative fuel for heavy-duty Diesel Engines because of the lower resulting emissions of PM, $CO_2$ and $NO_x$. Almost all CNG vehicles use the PFI-type Engine. However, PFI-type CNG Engines have a lower brake horse power, because of reduced volumetric efficiency and lower burning speed. This is a result of gaseous charge and the time losses increase as compared with the DI-type. This study was conducted to investigate the effect of injection conditions (early injection mode, late injection mode) on the combustion phenomena and performances in the or CNG Engine. A DI Diesel Engine with the same specifications used in a previous study was modified to a DI CNG Engine, and injection pressure was constantly kept at 60bar by a two-stage pressure-reducing type regulator. In this study, excess air ratios were varied from 1.0 to the lean limit, at the load conditions 50% throttle open rate and 1700rpm. The combustion characteristics of the or CNG Engine - such as in-cylinder pressure, indicated thermal efficiency, cycle-by-cycle variation, combustion duration and emissions - were investigated. Through this method, it was possible to verify that the combustion duration, the lean limit and the emissions were improved by control of injection timing and the stratified mixture conditions. And combustion duration is affected by not only excess air ratio, injection timing and position of piston but gas flow condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.146-153
• /
• 2013

CNG buses has contributed to improve air quality in cities. But it is difficult to meet the next emission regulations such as EURO-VI without the help of additional post-processing device. Hydorgen has higher flame speed and lower combustion temperature that make it thermal efficiency increase with leaner operation. Using hydrogen natural gas blend (HCNG) fuel is promising technology which can reduce $NO_x$ and $CO_2$ emissions for a natural gas vehicle. However, fuel flow rate of HCNG should be increased since hydrogen's energy density per volume is much smaller than natural gas. In the present study, the characteristics of fuel supply system and its applicability were evaluated in a heavy duty natural gas engine. The results showed that the potential of fuel pressure regulator and fuel metering valve had enough capacity with HCNG. Employed mixer did not affect the distribution characteristics of mixture.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.44-49
• /
• 2016

Flue gas desulfurization(FGD) is an effective technique to remove $SO_2$ gases of coal-fired plants. Limestone is usually used as desulfurizing agent. In this study, we use the limestone sludge which is a by-product of steel industry in order to replace desulfurizing agent of FGD process. Physical and chemical characteristics analysis of desulfurizing agent was conducted. Desulfurizing agent using limestone sludge was fabricated by pre-treatment process and, then the agent was used on FGD process. Consequently, the tendency on the $SO_2$ concentration did not appear. And limestone sludge was considered as possible alternative agent for flue gas desulfurization process through absorber control system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.205-218
• /
• 1992

Trends in the applied microalgal researches were described as those in two separate periods. During the first period (earlie. than 1970) . most researches were oriented to using the whole microalgal cells as feed, food, fertilizer, and agent for the treatment of organic waste water. Since early 1970's (the second period) the number of researches on the production of specific cell metabolites has grown so rapidly. Many researchers endeavored after the very expensive 'natural products' form microalge such as vitamins, amino acids, $\beta-carotene$, phycofluor, pharmaceuticals, biologically active compounds, $H_2$ gas, and deutrated chemicals. On the other hand, the applied microalgal researches in Korea are still in the early stage of developments, and urgent activation of the related researchers is quite important to meet the future needs in the microalgal products. Systems for the management of the management of the microalgal clonal cultures from Korean waters should be established soon, which will support many microalgal researchers in Korea.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.349-355
• /
• 2016

Divinycell, which functions as both insulation and a supporting structure, is generally applied in the NO96-type liquefied natural gas (LNG) insulation system. Polymer-material-based Divinycell, which has a high strength and low weight, has been widely used in the offshore, transportation, wind power generation, and civil engineering fields. In particular, this type of material receives attention as an insulation material because its thermal conductivity can be lowered depending on the ambient temperature. However, it is difficult to obtain research results for Divinycell, even though the component materials of the NO96-type LNG cargo containment system, such as 36% nickel steel (invar steel), plywood, perlite, and glass wool, have been extensively studied and reported. In the present study, temperature and strain-rate dependent compressive tests on Divinycell were performed. Both the quantitative experimental data and elastic recovery are discussed. Finally, the mechanical characteristics of Divinycell were compared to the results of polyurethane foam insulation material.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.125-140
• /
• 2018

This study uses daily price data on three major types of crude oil (Brent, Dubai, and WTI) and BDI from January 2, 2009 to June 29, 2018, to compare the relationship between crude oil prices and BDI for rate of change and volatility. Unlike previous studies, the correlation between BDI and crude oil prices was analyzed both the rate of change and variability, VARs, Granger Causality Test, and the GARCH and DCC models were employed. The correlation analysis, indicated that the crude oil price change rate and volatility affect the BDI change rate and that BDI volatility affects the crude oil price change rate and volatility. The relationship between oil prices and BDI is identified, but their correlation is low, which is likely a result of lower dependence on crude oil as demand for natural gas increases worldwide and demand for renewable energy decreases. These trends could result in lower correlations over time. Therefore, focusing on the changing demand for raw materials in future investments in international shipping(real economy) and oil markets and macroeconomic analysis is necessary.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.4
• /
• pp.46-58
• /
• 2010

Hydrogen peroxide(HP) and liquid methane have deserved renewed considerations as green propellants in recent years, because main design concerns in the development of the new generation propulsion system for spacecrafts are concentrated on low operation cost and environmental cleanness. Although HP has a long history of application to aerospace propulsion systems due to high density, mono-propellant characteristics and low toxicity, it had been replaced by hydrazine and liquid oxygen due to extreme performance requirement during the cold war. But HP has received a renewed interest due to its increased stability and many researches have been conducted to develop high performance LREs(Liquid Rocket Engines) using HP. Liquid methane has also received a new interest in rocket propulsion system for the future space exploration according to its possibility of ISRU(In-Situ Resource Utilization).