• Journal of the KSME
• /
• v.34 no.12
• /
• pp.929-939
• /
• 1994

최근 환경문제와 관련하여 정제된 석유 연료가 아닌 천연가스와 같은 연료의 사용이 증가하면서 산업용 가스터빈의 연소기술에 대한 관심이 집중되고 있다. 가스터빈 연소로 생성되는, 환경을 위협하는 오염물은 연기, 수증기, 일산화탄소(CO), 미연 탄화수소, $NO_{x}$, $SO_{x}$ 등이 있다. 수증기 및 일산화탄소는 지구 온실화에 영향을 미치고 있으나 그다지 심각한 정도는 아 니며, $SO_{x}$는 독성이 있으나 연료 정제시 제거되어질 수 있다. $NO_{x}$는 지구의 오 존층을 파괴하여 생태계를 위협하기 때문에 오염 배출물중 가장 심각하게 고려되어지고 있다. 미국에서는 법으로 산업용 가스터빈의 $NO_{x}$의 양을 규제하고 있는데 15% 산소배출농도에 대하여 1984년에 75ppm에서 1993년에 30ppm으로 낮추어 규제하고 있다. 일본도 미국과 비슷한 수준으로 규제하고 있으며, 따라서 최근의 가스터빈 연소기술은 저 $NO_{x}$연소기에 대한 것으로 저$NO_{x}$연소에 관한 개론 및 가스터빈 연소기의 저$NO_{x}$화 방법, 그리고 미 국과 일본의 최근의 저$NO_{x}$연소기 개발동향에 대하여 다루고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.865-871
• /
• 2012

Because of the increasing cost of oil and natural gas, energy production technologies using coal, including synthetic natural gas (SNG) and integrated gasification combined cycle (IGCC), have attracted attention because of the relatively low cost of coal. During the early stage of a project, the developer or project owner has many options with regard to the selection of a gasifier. In particular, from the viewpoint of feasibility, the gasifier is a key factor in the economic evaluation. This study compares the technical aspects of gasifiers for a real SNG production project in an early stage. A fixed-bed slagging gasifier, wet-type entrained gasifier, and dry-type entrained gasifier, all of which have specific advantages, can be used for the SNG production project. Base on a comparison of the process descriptions and performances of each gasifier, this study presents a selection guideline for a gasifier for an SNG production project that will be beneficial to project developers and EPC (Engineering, Procurement, Construction) contractors.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.70-80
• /
• 2017

According with annual report by the OECD (Organization for Economic Co-operation and Development), South Korea is at the top of the list of countries with bad air pollution (fine dust particles) and the South Korean government announced the cause to be due to the particle emissions of large and old diesel vehicles. To solve this issue, the government (jointly with related ministries), promoted the "Special Measures for Comprehensive Fine Dust Management Program" as a way to improve environmental pollution by reducing the overall output of fine dust particles emitted by public vehicles. The measure implemented a gas subsidy system to convert eco-friendly vehicles of city and chartered buses throughout the country. In this study, we take a look at the economical evaluation, comparison and analysis of the conversion of diesel vehicles to natural gas (CNG) vehicles. This report represent the basis for the need to expand the funds of the subsidy program and reviews the feasibility of the policy by taking into consideration the social and economical benefits and the effect in the environment when converting diesel fuel to natural gas vehicles through the type-specific fuel conversion scenarios.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.12-17
• /
• 2010

Natural gas is one of the most promising alternatives to gasoline and diesel fuels because of its high thermal efficiency and lower harmful emissions, including $CO_2$. However, the possibility of partial burn and misfire makes the benefits of natural gas fueled engine worse under lean burn operation condition, Hydrogen addition can promote the combustion characteristics while reduces emissions extremely. In this study, the effect of hydrogen addition on an engine performance was investigated. The results showed that thermal efficiency was increased due to the expansion of lean operation range under stable operation. NOx emission can be significantly reduced with the small increase in HC or CO emissions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.21-27
• /
• 2015

In order to meet the current emission regulations (EURO-6), it is necessary to significantly reduce $CH_4$ and $NO_X$ emissions. This study investigated the effect of a reduction in the valve overlap on the combustion and emission characteristics of a hydrogen-compressed natural gas engine under a part-load operating condition. The combustion and emission characteristics were analyzed for each fuel using the original camshaft and an altered camshaft with reduced valve overlap. The results showed that the thermal efficiency was decreased and the fuel flow was increased when using the altered camshaft. The $CO_2$ and $CH_4$ emissions were increased as a result of the reduced thermal efficiency. Under lean operating conditions, the $NO_X$ emission was decreased compared with one of the conventional camshaft. Thus, under the same fuels and operating conditions, it had a harmful influence on the emission characteristics and thermal efficiency.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.551-561
• /
• 2014

Natural gas is the world's fastest-growing fossil fuel, with consumption increasing from 113 trillion cubic feet(Tcf) in 2010 to 185Tcf in 2040. While conventional natural gas streams from the earth relatively easily, unconventional gas finds are more difficult to develop and more costly to produce. Right now, there are six main types of unconventional gas, including deep gas, gas-containing shale, coalbed methane(CBM), geopressurized zones, Arctic and subsea hydrates, and tight gas. Tight gas refers to natural gas reservoirs locked in extraordinarily impermeable, hard rocks(sandstone, siltstone or carbonate sedimentary rocks). In this study, we analyzed total 375 papers(2000-2014) of tight gas by country, institution, international cooperation etc.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.19-23
• /
• 2012

DME HCCI기관의 단점은 디젤 엔진에 비해 기관부하 영역이 굉장히 좁다는 것이고 이는 저온산화반응이 너무 빨리 일어나서 노크를 발생시키기 때문이다. 저온산화반응을 억제하기 위해서 DME 연소에 미치는 천연가스의 영향을 실험한 결과, 천연가스가 DME의 저온산화반응을 억제시키기 때문에 기관부하영역이 확대된다는 것을 알았다. 본 연구에서는 서로 다른 세탄가를 가진 첨가연료가 DME 저온산화반응에 미치는 영향을 실험적으로 조사하였다. 그 결과 저온산화반응의 최고 열발생율은 세탄가에 의존하지 않지만 착화온도는 세탄가에 의존한다는 사실을 밝혔다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.15-21
• /
• 1994

단계적 연료방식을 가지는 가스터빈 연소기의 해석을 위한 방법을 제안하였으며, 이를 바탕으로 연료배분방식에 따른 연소기의 연소 및 NOx 발생특성을 규명하였다. 연소기 해석모델은 연소기 내부를 선회기구역, 1차연소구역, 재순환구역, 2차연소구역 및 희석구역으로 나누어 각각의 반응구역을 혼합반응기, 플러그 유동반응기의 모델로서 근사하였다. 반응기내의 연소 및 NOx 생성반응은 천연가스 반응모델과 Zel'dovich 의 NOx 모델을 이용하여 예측하였다. 본 해석방법을 이용하여, 각 반응구역에 유입되는 연료량이 연소기내 연소특성, NOx 발생 특성 및 온도분포에 미치는 영향을 검토하였다. 또한, NOx 저감을 위해 증기분사를 사용하는 경우에 분사위치가 NOx 발생에 미치는 영향을 분석하여, 가스터빈 연소기설계에 필요한 기초자료를 제공하였다.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3288-3293
• /
• 2007

Compressed natural gas has good potential for alternative vehicle fuel due to its economical and clean characteristics. However, the composition of natural gas based on production location is known to affect performance and emissions of CNG engine. Thus, the objective of this paper is to clarify the effect of fuel composition on combustion and emissions of CNG engine. This paper presents combustion characteristics obtained from running a 2.5L, 4-cylinder CNG engine retrofitted IDI diesel engine with engine dynamometer. BSFC, emissions, fuel consumption and combustion pressure were measured under steady state operating conditions especially at partial load for CNG engine. Based on the experimental results, we found that CNG composition affects engine performance, fuel conversion efficiency and burning rate.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.75-82
• /
• 1993

A 50 ㎾ phosphoric acid fuel cell(PAFC) system using natural gas was simulated for steady state with the commercial software, ASPEN PLUS. The USER block and the FORTRAN block were prepared to simulate the cell. The changes of hydrogen yield according to the variation of several operating conditions were examined and the operating conditions to maximize hydrogen yield were obtained. The simulation results agree with the real data, which can be used to prepare the basic process data and the optimal conditions for the domestic commercial fuel cell system. H$_2$utilization rate over 50% should be maintained to achieve the efficiency of the conventional electricity generation. Energy consumption can be reduced by utilizing the heat released from the reformer and the cell which are operated at high temperatures.