• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.5-11
• /
• 2008

The RI gasoline engine haying a sub-chamber had a high cycle variation due to the difficulty of the residual gas scavenge in the sub-chamber. To solve this problem and improve the combustion performance of RI engine, we devised a method to inject directly CNG fuel into the sub-chamber. A DI diesel engine of single cylinder was converted into a RI-CNG engine and an electronic control unit for the engine was manufactured. In this study, the combustion characteristics of the RI-CNG engine were investigated with the injection timings and air excess ratios at the load conditions of 50% throttle open rate and 1700rpm. As the results from this study, the RI-CNG engine worked reliably under the condition of the ignitable lean limit of $\lambda=1.7$ by showing the $COV_{imep}$ below about 5%. And the highest thermal efficiency could be obtained in the injection timing that produced the high imep and the low $COV_{imep}$ at the same time. The CO emission concentration indicated very low values and the THC and $NO_x$ showed an opposite pattern. With a view to improving the thermal efficiency and reducing the harmful emissions, the proper control region of the ignition timing and the mixture ratio were nearly ATDC $20^{\circ}\sim50^{\circ}$ and $\lambda=1.4$ respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.698-703
• /
• 2014

Currently, demand of liquefied natural gas as an alternatice energy inceases because of depletion of fossil fuels. it is accompanied by inceasing demand of LNG ship. Consequentially, it is expected that demand of bellows for LNG ship increase. The material used for LNG vessels's bellows is an alloy of INCOLOY 825 and STS316L, which are strong against low-temperature brittleness and seawater corrosion. This study establishes the welding condition of LNG vessel's bellows material in extremely low temperature, and analyzes the formability of weld through Erichsen Test. When welding was conducted at optimal condition, tensile strength of weld presneted strength value up to 90% compared with base metal. As results of formalbility through Erichsen test, very good weld that failure occrued in base metal was gotten.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.176.1-176.1
• /
• 2011

세계적으로 석유 기반 자원의 고갈에 따른 부족, 기후변화협약 및 환경규제 강화에 의해 세계적으로 바이오소재를 이용하고자 하는 연구와 더불어 유리강화복합재료의 대체물질로 적합한 천연섬유를 보강재로 사용하는 바이오복합재료의 연구 또한 활발하게 진행되고 있다. 최근 새로운 신재생에너지원으로 각광 받고 있는 바이오에너지 중 해조류는 가장 자연친화적이고 생산력이 뛰어난 바이오매스로 알려져 있다. 해조류는 바닷물 속에 녹아 있는 탄소를 흡수할 뿐만 아니라 광합성을 통해서도 탄소를 흡수하면서 성장하기 때문에 탄소흡수원의 역할을 하게 되며, 해조류 바이오에너지를 생산할 경우 화석연료를 대체하여 지구온난화의 주범인 온실가스를 감축하는 기능을 한다. 본 연구에서는 해조류를 이용한 바이오에너지 생산 공정에서 2차적으로 발생하는 부산물을 보강재로 사용한 바이오복합재료의 제조와 제조된 바이오복합재료의 열적 특성 및 동역학적 특성을 분석하였다. 해조류 부산물의 화학적 전처리에 따른 Thermogravimetric analysis(TGA) 분석 결과로 cellulose 함량이 가장 높고 불순물이 적은 황산 처리한 파래를 이용해 파래/Polypropylene(PP) 바이오복합재료를 다양한 보강비율 (20-50wt%)로 압축성형 하였다. 파래/PP 바이오복합재료의 저장탄성률은 파래 함량이 40wt%일 때 4.0 Gpa으로 최대값을 보였으며 이는 PP 매트릭스와 비교했을 때 약 8.1% 향상된 결과이다. 파래/PP 바이오보합재료의 열팽창 특성은 파래 함량이 증가함에 따라 열팽창계수가 낮아지는 경향으로 50wt%일 때 가장 낮은 값을 나타내었으며 이는 PP 매트릭스와 비교했을 때 약 56% 향상된 결과이다. 따라서 비생분해성 고분자에 새로운 신재생 바이오매스인 해조류를 보강재로 사용하여 열적 특성 및 동역학적 특성이 향상된 친환경적인 바이오복합재료의 제조 가능성을 확인하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.193-200
• /
• 2007

Natural gas is one of the most promising alternatives to gasoline and diesel fuels because of its lower harmful emissions, including $CO_2$, and high thermal efficiency. In particular, natural gas is seen as an alternative fuel for heavy-duty Diesel Engines because of the lower resulting emissions of PM, $CO_2$ and $NO_x$. Almost all CNG vehicles use the PFI-type Engine. However, PFI-type CNG Engines have a lower brake horse power, because of reduced volumetric efficiency and lower burning speed. This is a result of gaseous charge and the time losses increase as compared with the DI-type. This study was conducted to investigate the effect of injection conditions (early injection mode, late injection mode) on the combustion phenomena and performances in the or CNG Engine. A DI Diesel Engine with the same specifications used in a previous study was modified to a DI CNG Engine, and injection pressure was constantly kept at 60bar by a two-stage pressure-reducing type regulator. In this study, excess air ratios were varied from 1.0 to the lean limit, at the load conditions 50% throttle open rate and 1700rpm. The combustion characteristics of the or CNG Engine - such as in-cylinder pressure, indicated thermal efficiency, cycle-by-cycle variation, combustion duration and emissions - were investigated. Through this method, it was possible to verify that the combustion duration, the lean limit and the emissions were improved by control of injection timing and the stratified mixture conditions. And combustion duration is affected by not only excess air ratio, injection timing and position of piston but gas flow condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.119-143
• /
• 2021

Selecting liquid methane as fuel is a prevailing trend for recent rocket engine developments around the world, triggered by its affordability, reusability, storability for deep space exploration, and prospect for in-situ resource utilization. Given years of time required for acquiring a new rocket engine, a national-level R&D program to develop a methane engine is highly desirable at the earliest opportunity in order to catch up with this worldwide trend towards reusing launch vehicles for competitiveness and mission flexibility. In light of the monumental cost associated with development, fabrication, and testing of a booster stage engine, it is strategically a prudent choice to start with a low-thrust engine and build up space application cases.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.33-39
• /
• 2022

In this study, analytical thermochemical modeling factors that contribute to maintaining a specific temperature range during vanadium roasting as a pretreatment using a rotary kiln are investigated. The model-related mechanisms include thermochemical reaction rates, heat balance, and heat transfer, through which the resultant temperature can be estimated intuitively. Ultimately, by optimizing these parameters, the ideal roasting temperature in the kiln is ≈1000 ℃ (or ≈1273 K) for long-term operation. Therefore, the heat generated from hydrocarbon (natural gas) fuel combustion and ore oxidation reactions, as well as the radiant heat transferred to ores, are assessed. In addition, thermochemical methods for relieving the temperature gradient in order to maintain the optimum temperature range of the rotary kiln are suggested.

• Clean Technology
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2010

The feasibility of clean technology to minimize the $CO_2$ emission by recycling and reuse the waste materials and energy have been studied for the cement industry. A life cycle assessment (LCA) was performed for an alternative raw material-supply method to use the molted slag as the major raw material in the cement clinker manufacturing. Using this new method, a 60% of $CO_2$ could be reduced that comes out during the decarboxylation from the cement rotary kiln. The energy-efficiency improvement and the alternative energy methods that had been determined in our previous study through the environmental assessment of cement industry were applied to the study for the reduction of $CO_2$ emission. The natural gas, one of the fossil fuels, was also used as the first choice to get the result at the earliest time by the most economic and the most efficient green technology and to switch into the carbon neutral energy consumption pattern.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.131-138
• /
• 2019

The world's electricity production ratio is 40% for coal, 20% for natural gas, 16% for hydroelectric power, 15% for nuclear power and 6% for petroleum. Fossil fuels also cause serious problems in terms of price and supply because of the high concentration of resources on the earth. Solar energy is attracting attention as a next-generation eco-friendly energy that will replace fossil fuels with these problems. In this study, we test the charge-operation plan and the discharge operation plan for peak-cut operation by applying the maximum power demand reduction simulation. To do this, we selected the electricity usage from November to February, which has the largest amount of power usage, and applied charge / discharge logic. Simulation results show that the contract power decreases as the peak demand power after the ESS Peak-cut service is reduced to 50% of the peak-target power. As a result, the contract power reduction can reduce the basic power value of the customer and not only the economic superiority can be expected, but also contribute to the improvement of the electric quality and stabilization of the power supply system.

• Clean Technology
• /
• v.26 no.1
• /
• pp.65-71
• /
• 2020

Various solar hybrid energy conversion processes, which have both the advantages of renewable energy sources and fossil energy sources, have been developed in the world because stable and predictable energy supplies, such as electricity and natural gas, are necessary for modern societies. In particular, a solar hybrid energy conversion process based on a dual fluidized bed process concept has been expected as the promising solution for sustainable energy supply via thermochemical conversions, such as pyrolysis, combustion, gasification, and so on, because solar thermal energy could be captured and stored in fluidized bed materials. Therefore, the attrition and heat transfer characteristics of silicon carbide and alumina particles used for fluidized bed materials for the solar hybrid energy conversion process were studied in an ASTM D5757 reactor and a bubbling fluidized bed reactor with 0.14m diameter and 2m height. These characteristics of novel fluidized bed materials were compared with those of sand particles which have widely been used as a fluidized bed material in various commercial fluidized bed reactors. The attrition resistances of silicon carbide and alumina particles were higher than those of sand particles while the average values of heat transfer coefficient in the bubbling fluidized bed reactor were in the range of 125 ~ 152 W m^-2K^-1.

• Journal of Arbitration Studies
• /
• v.18 no.2
• /
• pp.201-233
• /
• 2008

러시아와 한국간의 공식적인 접촉은 1990년 6월 샌프란시스코에서 개최된 정상회담이다. 동년 9월 뉴욕에서 개최된 양국의 외무장관 회담에서 러시아와 한국의 외교관계가 수립되었다. 그간 양국간에는 협정을 통한 협력의 법적기반이 조성되었는데 주요 분야를 보면 무역, 투자보장, 어업, 이중과세방지, 군사기술분야, 원자력의 평화적 이용, 문화교류에 관한 협정들이 있다. 역시 양국간의 주요 관심사항은 무역과 경제협력 분야이다. 2007년도 러시아와 한국의 무역액은 150억 달러를 초과함으로써 전년도에 비해 55.5% 증가하였다. 러시아의 한국으로의 수출은 약 70억 달러로서 전년도에 비해 52.6% 증가했고 한국으로부터의 수입은 80억 달러를 초과함으로써 전년도에 비해 56.1% 증가하였다. 그리하여 러시아는 한국의 10대 교역국으로 성장하였다. 가스와 오일 프로젝트 추진과 관련하여 사할린지역에서 사용하기 위해 한국으로부터 수입하는 드릴기계장비, 탱커, 자동차, 휴대전화는 한국과 러시아 양국간 경제성장의 주요요인이 되고 있다. 2008년 1/4 분기 양국간 무역액은 42억 달러를 초과했는데 이는 전년도 동기와 비교해서 72.1% 증가한 것이다. 이 중 한국에의 수출은 17억 달러를 초과했는데 이는 전년도 1/4분기에 비해 91.7% 성장한 것이다. 한국으로부터의 수입은 약 25억 달러로서 전년도 1/4 분기와 대비해서 60.6% 성장했다. 러시아와 한국간의 경제교류가 크게 증대하게 된 배경에는 러-한경제과학기술협력공동위원회가 큰 역할을 담당했다. 이 논문에서 필자는 무역과 투자측면에서 본 양국간 경제협력의 특징을 고찰하는 한편 러시아의 동부지역(러시아 극동 및 바이칼횡단지역)과 한국과의 협력과 관련된 역동성과 과제를 제시하는데 연구의 목적을 두었다. 한국은 외국기업과 함께 러시아 극동지역의 무역과 경제협력 증진에 상당한 공헌을 함으로써 러시아 극동경제권에서 주요 무역파트너가 되고 있다. 또한 본 연구에서는 한국과 러시아간의 주요 협력프로젝트에 관하여 고찰하는 한편 앞으로의 전망을 제시하였다. 이 문제는 무엇보다도 한-러간의 공동 에너지프로젝트 및 에너지자원의 무역과 관련되어 있다. 한국과 러시아는 이미 많은 분야에서 상당한 정도로 상호 협력관계를 발전시켜왔다. 여기에는 정책, 에너지, 경제, 문화, 과학기술 분야가 포함되어 있다. 현재 러시아와 한국간에는 에너지 분야에서의 전략적 대화채널 구축에 관한 문제와 함께 연료 및 에너지공단 건설과 관련하여 협력문제가 논의되고 있다. 에너지 분야에서의 전략적 대화개념 구축을 위해서는 전략, 예측 및 투자환경의 문제가 양국간에 집중논의 되어야 하고 법제상의 조화문제도 논의되어야 한다.