• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.279-287
• /
• 2001

In this paper, we discuss the scale of subjective speech quality measurement over VoIP(Voice over IP) network which is a component of broadband networks. Objective parameters of multimedia services like PSNR or jitter can easily measured and defined, but these factors are not easily meet the user's perceptual recognition. We suggest the speech quality measurement scale through the subjective measurement for end-to-end speech quality composed of sender-side quality, transmission quality, receiver-side quality, which provide the degree of correctness of representation of speaker, the degree of impairment caused by various factors, the degree of recognition of processed speech, respectively. Also, we examined the proposed method and verify it's availability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.737-743
• /
• 2008

I compare my parameter estimation methodoloay with existing method, considering both of testing effort and fault detecting rate simultaneously in software reliability modeling. Generally speaking, fault detection/removal mechanism depends on how apply previous fault detection/removal and testing effort of S/W. The fault removal efficiency makes large influence to the reliability growth, testing and removal cost in developing stage S/W. This is very useful measure during all the developing stages and much helpful for the developer to estimate debugging efficiency, and furthermore, to anticipate additional working amount.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.9-17
• /
• 2009

License plate recognition is an active research area. but few comparative studies on license plate binarization have been conducted. Many related researchers have experienced similar trial and error for finding an effective binarization method. To reduce this trial and error, this study implemented some binarization methods and quantitatively compared the performance of the methods. The performance evaluation consists of a low level measure and a high level measure, so it can evaluate not only the quality of binarized image itself but also the usefulness of the result. The performance evaluation was separately performed with three groups of images so as to understand the properties of the binarization methods. Experimental results show that the quality of binarization is more dependent on the evenness of illumination than the intensity of illumination. The Otsu's method has acquired the most effective performance in the group of even illumination images and the Niblack's method with parameter correction has shown the best quality in the group of uneven illumination images.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.68-77
• /
• 2000

Line special frequency (LSF) parameters have been widely used in low bit-rate speech coding due to their efficiency for representing the short-time speech spectrum. In this paper, a new distance measure based on the masking properties of human ear is proposed for quantizing LSF parameters whereas most conventional quantization methods are based on the weighted Euclidean distance measure. The proposed method derives the perceptual distance measure from the definition of noise-to-mask ratio (NMR) which has high correspondence with the actual distortion received in the human ear and uses it for quantizing LSF parameters. In addition, we propose an adaptive bit allocation scheme, which allocates minimal bits to LSF parameters maintaining the perceptual transparency of given speech frame for reducing the average bit-rates. For the performance evaluation, we has shown the ratio of perceptually transparent frames and the corresponding average bit-rates for the conventional and proposed methods. By jointly combining the proposed distance measure and adaptive bit allocation scheme, the proposed system requires only 770 bps for obtaining 95.5% perceptually transparent frames, while the conventional systems produce 89.9% at even 1800 bps.

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.15-23
• /
• 2013

In general, simulation models are effectively used in the field of engineering design. The experiment with simulation models to obtain optimal design parameters, however, is a time-consuming task and requires a lot of resources. Hence, meta-models representing the relationships between input variables and performance measures are exploited to efficiently determine the value of design parameters. To construct a meta-model, a number of simulation executions with sample scenarios are required. The number and quality of sample scenarios determine not only the level of efficiency in constructing the meta-model but also accuracy of the model. Space-filling condition is regarded to be an important condition for the quality of scenarios. This paper proposes sample scenario generation methods based on space-filling measures such as maxmin, Audze-Eglais, and centered L2-discrepancy. The performance of these scenario generation methods are evaluated through experiments.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2786-2800
• /
• 1997

In this paper, we investigate how well the channel memory (statistical dependence in the occurrence of transmission errors) can be used in the evaluation of widely used error control schemes. For this we assume a special case named as the simplest Markovian block-error pattern with two states, in which each block is classified into two classes of whether the block transmission is in error or not. We apply the derived pattern to the performance evaluation of the practical link-level procedures, LAPB/D/M with multi-reject options, and investigate both throughput and user-perceived response time behaviors on the discrete-time domain to determine how much the performance of error recovery action is improved under burst error condition. Through numerical examples, we show that the simplest Markovian block-error pattern tends to be superior in throughput and delay characteristics to the random error case. Also, instead of mean alone, we propose a new measure of the response time specified as mean plus two standard deviations 50 as to consider user-perceived worst cases, and show that it results in much greater sensitivity to parameter variations than does mean alone.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.7
• /
• pp.1-7
• /
• 2021

In this paper, we propose a feature selection technique for multi-label classification. Many existing feature selection techniques have selected features by calculating the relation between features and labels such as a mutual information scale. However, since the mutual information measure requires a joint probability, it is difficult to calculate the joint probability from an actual premise feature set. Therefore, it has the disadvantage that only a few features can be calculated and only local optimization is possible. Away from this regional optimization problem, we propose a feature selection technique that constructs a low-rank space in the entire given feature space and selects features with sparsity. To this end, we designed a regression-based objective function using Nuclear norm, and proposed an algorithm of gradient descent method to solve the optimization problem of this objective function. Based on the results of multi-label classification experiments on four data and three multi-label classification performance, the proposed methodology showed better performance than the existing feature selection technique. In addition, it was showed by experimental results that the performance change is insensitive even to the parameter value change of the proposed objective function.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.33-42
• /
• 2022

In this paper, we proposed a deep learning model based on multi-scale dilated convolution feature fusion for the segmentation of black ice region in road image to send black ice warning to drivers in real time. In the proposed multi-scale dilated convolution feature fusion network, different dilated ratio convolutions are connected in parallel in the encoder blocks, and different dilated ratios are used in different resolution feature maps, and multi-layer feature information are fused together. The multi-scale dilated convolution feature fusion improves the performance by diversifying and expending the receptive field of the network and by preserving detailed space information and enhancing the effectiveness of diated convolutions. The performance of the proposed network model was gradually improved with the increase of the number of dilated convolution branch. The mIoU value of the proposed method is 96.46%, which was higher than the existing networks such as U-Net, FCN, PSPNet, ENet, LinkNet. The parameter was 1,858K, which was 6 times smaller than the existing LinkNet model. From the experimental results of Jetson Nano, the FPS of the proposed method was 3.63, which can realize segmentation of black ice field in real time.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.1-6
• /
• 1998

The evaluation of reliability is very important in the development process of software. There may be lack of trustfulness on the results that come from the analysis and evaluation of reliability of softwares which do not divide the test phases. At this point, this article studies how to evaluate the reliability dividing the test phases in order to settle the these problems. In doing so, I apply the fault data to be found in Unit Test, Integration Test, Validation Test and System Test to SRGM(Software Reliability Growth Model), Exponential SRGM, Delayed S-shaped SRGM and Inflection S-shaped SRGM. The result is that Inflection S-shaped is best suitable with Unit Test Delayed S-shaped is best suitable with Integration and Validation Test, and Exponential SRGM is best suitable with System test. In this respect, I can show that the results of this study on parameter estimation, difference square summation, number of fault remained is superior to the established methods.

• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.21-30
• /
• 2007

A multiwavelength spectrophotometric titration method was applied to study protolytic constants of four water-soluble vitamins, folic acid(vitamin B9 or B0), thiamine(vitamin B1), riboflavin(vitamin B2) and pyridoxal (vitamin B6) in binary ethanol-water mixtures at 25oC and an ionic strength of 0.1M NaNO3. The protolytic equilibrium constants, spectral profiles, concentration diagrams and also the number of components has been calculated from the curve fitting of the pH-absorbance data with appropriate mass balance equations by an established factor analysis model. DATAN program was used for determination of acidity constant and SPECFIT program was used for calculation of standard deviations and partial correlation coefficients. A glass electrode calibration procedure based on the four parameter equation pH=α+SpcH+JH+[H+]+ JOH-Kw/[H+] based on the Gran,s plots was used to obtain pH-readings in the concentration scale (pcH). The effect of the solvent on the protolytic constants was discussed.