• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2014

A parametric sensitivity to the annual exposure dose rate to the farming exposure group has been deterministically carried out for three principal elements identified in the near-field of the pyroprocessed waste repository system as a series study of Part 1 of the coupled paper with the same title. Credit time for both metal and ceramic containers, annual nuclide release rete and the degree of loss of bentonite buffer around the container are selected and investigated deterministically for important nuclides. To this end the A-KRS has been assessed and then compared among each other with the normal, the worst, and the best case scenarios associated with their extreme values these elements could have. All the elements are shown to be sensitive to the results as was in Part 1. Methodology studied through this study and the results are expected to make a good feedback to the repository design.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.205-213
• /
• 2006

본고에서는 해외사례의 조사/분석을 통해 국내 환경에 적합한 처분시스템을 개발하는데 효율적으로 이용할 목적으로 일본의 방사성 폐기물 처분과 관련한 주요기관의 사업내용을 정리하고 암석역학 전공자가 관심을 가져볼 만한 처분 관련 연구시설 및 연구내용을 소개한다. 저준위 폐기물을 대상으로 한 100m 심도의 롯까쇼무라 시험공동과 고준위 폐기물을 대상으로 결정암질에 건설되는 1000m 심도의 미즈나미 지하연구시설 및 퇴적암질에서의 500m 심도의 호로노베 지하연구시설을 소개하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2014

For several decades, many countries operating nuclear power plants have been studying the various disposal alternatives to dispose of the spent nuclear fuel or high-level radioactive waste safely. In this paper, as a direct disposal of spent nuclear fuels for deep geological disposal concept, the rod consolidation from spent fuel assembly for the disposal efficiency was considered and analyzed. To do this, a concept of spent fuel rod consolidation was described and the related concepts of disposal canister and disposal system were reviewed. With these concepts, several thermal analyses were carried out to determine whether the most important requirement of the temperature limit for a buffer material was satisfiedin designing an engineered barrier of a deep geological disposal system. Based on the results of thermal analyses, the deposition hole distance, disposal tunnel spacing and heat release area of a disposal canister were reviewed. And the unit disposal areas for each case were calculated and the disposal efficiencies were evaluated. This evaluation showed that the rod consolidation of spent nuclear fuel had no advantages in terms of disposal efficiency. In addition, the cooling time of spent nuclear fuels from nuclear power plant were reviewed. It showed that the disposal efficiency for the consolidated spent fuel rods could be improved in the case that cooling time was 70 years or more. But, the integrity of fuels and other conditions due to the longer term storage before disposal should be analyzed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.458-463
• /
• 1998

고준위방사성페기물의 기준 처분시스템 (Reference Geological Disposal System)의 개념설정을 위하여 현재 국내 원전에서 발생되고 있거나 향후 2010까지 건설될 원전으로부터 발생될 모든 사용 후 핵연료연료의 특성(크기, 무게, 초기농축도, 연소도, 냉각기간 등)을 대표할 수 있는 기준 사용 후 핵연료를 선정하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.261-265
• /
• 2003

This paper proposes acceptance requirements and the corresponding implementation strategy for the near-surface repository of low- and intermediate-level radioactive wastes. The proposed requirements include details on waste classification and radionuclide concentration limitation and inventory analysis. The strategy considers a relevant linking between predisposal waste management, disposal safety assessment and the overall disposal system.

• Tunnel and Underground Space
• /
• v.29 no.2
• /
• pp.75-88
• /
• 2019

With Kori nuclear power plant unit 1 as a beginning in April 1978, 24 nuclear power plants have been operated in Korea and two more plants are under construction. As the nuclear power plants being operated, radioactive wastes from the plants have been accumulated so that various methods for disposing them have been proposed. In Korea, researches have been conducted, being focused on DGD (Deep Geological Disposal), however, DBD (Deep Borehole Disposal) method needs considering as an alternative. In this technical note, element technologies for DBD were analyzed by compiling previous researches and their applicability on domestic cases were investigated. Conceptual studies regarding relevant designs were conducted and finally, technical challenges for actual disposal were described.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.7
• /
• pp.55-64
• /
• 2017

A geological repository has been considered one of the most adequate options for the disposal of high-level radioactive waste. A geological repository will be constructed in a host rock at a depth of 500~1,000 meters below the ground surface. The geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is very important to assure the disposal safety of high-level radioactive waste. It can restrain the release of radionuclide and protect the canister from the inflow of groundwater. High temperature in a disposal canister is released into the surrounding buffer material, and thus the thermal transfer behavior of the buffer material is very important to analyze the entire disposal safety. Therefore, this paper presents a thermal conductivity prediction model for the Kyungju compacted bentonite buffer material which is the only bentonite produced in Korea. Thermal conductivity of Kyungju bentonite was measured using a hot wire method according to various water contents and dry densities. With 39 data obtained by the hot wire method, a regression model to predict the thermal conductivity of Kyungju bentonite was suggested.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.331-331
• /
• 1999

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.153-154
• /
• 2016