• Title/Summary/Keyword: 처리 계층

Search Result 1,897, Processing Time 0.026 seconds

Edge to Edge Model and Delay Performance Evaluation for Autonomous Driving (자율 주행을 위한 Edge to Edge 모델 및 지연 성능 평가)

  • Cho, Moon Ki;Bae, Kyoung Yul
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.1
    • /
    • pp.191-207
    • /
    • 2021
  • Up to this day, mobile communications have evolved rapidly over the decades, mainly focusing on speed-up to meet the growing data demands of 2G to 5G. And with the start of the 5G era, efforts are being made to provide such various services to customers, as IoT, V2X, robots, artificial intelligence, augmented virtual reality, and smart cities, which are expected to change the environment of our lives and industries as a whole. In a bid to provide those services, on top of high speed data, reduced latency and reliability are critical for real-time services. Thus, 5G has paved the way for service delivery through maximum speed of 20Gbps, a delay of 1ms, and a connecting device of 106/㎢ In particular, in intelligent traffic control systems and services using various vehicle-based Vehicle to X (V2X), such as traffic control, in addition to high-speed data speed, reduction of delay and reliability for real-time services are very important. 5G communication uses high frequencies of 3.5Ghz and 28Ghz. These high-frequency waves can go with high-speed thanks to their straightness while their short wavelength and small diffraction angle limit their reach to distance and prevent them from penetrating walls, causing restrictions on their use indoors. Therefore, under existing networks it's difficult to overcome these constraints. The underlying centralized SDN also has a limited capability in offering delay-sensitive services because communication with many nodes creates overload in its processing. Basically, SDN, which means a structure that separates signals from the control plane from packets in the data plane, requires control of the delay-related tree structure available in the event of an emergency during autonomous driving. In these scenarios, the network architecture that handles in-vehicle information is a major variable of delay. Since SDNs in general centralized structures are difficult to meet the desired delay level, studies on the optimal size of SDNs for information processing should be conducted. Thus, SDNs need to be separated on a certain scale and construct a new type of network, which can efficiently respond to dynamically changing traffic and provide high-quality, flexible services. Moreover, the structure of these networks is closely related to ultra-low latency, high confidence, and hyper-connectivity and should be based on a new form of split SDN rather than an existing centralized SDN structure, even in the case of the worst condition. And in these SDN structural networks, where automobiles pass through small 5G cells very quickly, the information change cycle, round trip delay (RTD), and the data processing time of SDN are highly correlated with the delay. Of these, RDT is not a significant factor because it has sufficient speed and less than 1 ms of delay, but the information change cycle and data processing time of SDN are factors that greatly affect the delay. Especially, in an emergency of self-driving environment linked to an ITS(Intelligent Traffic System) that requires low latency and high reliability, information should be transmitted and processed very quickly. That is a case in point where delay plays a very sensitive role. In this paper, we study the SDN architecture in emergencies during autonomous driving and conduct analysis through simulation of the correlation with the cell layer in which the vehicle should request relevant information according to the information flow. For simulation: As the Data Rate of 5G is high enough, we can assume the information for neighbor vehicle support to the car without errors. Furthermore, we assumed 5G small cells within 50 ~ 250 m in cell radius, and the maximum speed of the vehicle was considered as a 30km ~ 200 km/hour in order to examine the network architecture to minimize the delay.

A Study on the Management of Manhwa Contents Records and Archives (만화기록 관리 방안 연구)

  • Kim, Seon Mi;Kim, Ik Han
    • The Korean Journal of Archival Studies
    • /
    • no.28
    • /
    • pp.35-81
    • /
    • 2011
  • Manhwa is a mass media (to expose all faces of an era such as politics, society, cultures, etc with the methodology of irony, parody, etc). Since the Manhwa records is primary culture infrastructure, it can create the high value-added industry by connecting with fancy, character, game, movie, drama, theme park, advertising business. However, due to lack of active and systematic aquisition system, as precious Manhwa manuscript is being lost every year and the contents hard to preserve such as Manhwa content in the form of electronic records are increasing, the countermeasure of Manhwa contents management is needed desperately. In this study, based on these perceptions, the need of Manhwa records management is examined, and the characteristics and the components of Manhwa records were analyzed. And at the same time, the functions of record management process reflecting the characteristics of Manhwa records were extracted by analyzing various cases of overseas Cartoon Archives. And then, the framework of record-keeping regime was segmented into each of acquisition management service areas and the general Manhwa records archiving strategy, which manages the Manhwa contents records, was established and suggested. The acquired Manhwa content records will secure the context among records and warrant the preservation of records and provide diverse access points by reflecting multi classification and multi-level descriptive element. The Manhwa records completed the intellectual arrangement will be preserved after the conservation in an environment equipped with preservation facilities or preserved using digital format in case of electronic records or when there is potential risk of damaging the records. Since the purpose of the Manhwa records is to use them, the information may be provided to diverse classes of users through the exhibition, the distribution, and the development of archival information content. Since the term of "Manhwa records" is unfamiliar yet and almost no study has been conducted in the perspective of records management, it will be the limit of this study only presenting acquisition strategy, management and service strategy of Manhwa contents and suggesting simple examples. However, if Manhwa records management strategy are possibly introduced practically to Manhwa manuscript repositories through archival approach, it will allow systematic acquisition, preservation, arrangement of Manhwa records and will contribute greatly to form a foundation for future Korean culture contents management.

A Study on the Transitional Aspects in Korean Gardens that Reflected of the Korean Folk Village 'Oeam-Ri' (외암리 민속마을에 나타난 한국정원의 전환기적 양상)

  • Lee, Won Ho
    • Korean Journal of Heritage: History & Science
    • /
    • v.42 no.1
    • /
    • pp.100-121
    • /
    • 2009
  • This study is subjected to those gardens of the Korean Folk Village 'Oeam-Ri' designed in 1920s. - transitional period of traditional gardens - and define socio-cultural change's influences and through documents on garden design, descendant's testimony and measured drawings, to understand that period's garden culture's characteristics according to garden design elements. This study applied following analysis methods and procedures to derive out characteristics of transitional garden culture. Analysis on socio-cultural characteristics in 1920s. Analysis on actual condition of transitional garden's design. In this point Outline of the Garden, Space formation, Garden designing elements are (1) water landscape, (2) plant, (3) structures, (4) paving, to derive out characteristics of the transitional garden. The results follow as below; First, during the transitional period 1920s, the economical development, fueled by opening nation's door to foreign countries and indication of collapse of statue systems together with idea of practical science and Enlightenment Thought, was element of changes in garden style. Second, Garden Designers of transitional gardens in 'Oeam-Ri' were limited to upper class of the society. They were wealthy enough to maintain their high social statue in rapidly changing society. As results, tendency of returning to nature developed gardens located in a site of scenic beauty and development of geographical features arranging techniques, and also showed copying foreign styles. Third, arrangement of garden and space composition, in most cases, composed of buildings and yards. Changes in water landscape features and garden spaces are centered to main-yard. Major changes of the garden spaces are water landscapes and plants that showing foreign influences. Fifth, scenic appearance techniques appears with dense garden space and emphasizing visual scenic view. Sixth, the characteristics of transitional garden design techniques are development of geographical feature arranging techniques, changes and mixture of the materials and garden types, emphasizing garden's decorative beauty, change of concept of yard within house into garden, changes from 'borrowing of landscapes' to 'selecting landscapes', changes of front garden from emptiness to fullness, changes of attitudes of enjoying gardens from 'staying calm in the garden' to 'moving or walking in the garden', changes to inner-oriented view, and changes from 'just watching and enjoying the nature' to 'enjoying specific objects'. This study is one of the efforts to restore the identity of Korean Traditional Garden by approaching and observing modern era which function as bridge between tradition and present day, and we observed transitional aspects of changes of traditional garden into modern garden. Hereafter, more studies will be needed to Modern Garden Design be recognized as part of Korean Garden Design History and these would be author's next assignment.

A Mobility Supporting MAC Protocol to Improve Handover Performance in IEEE 802.16j Multi-hop Relay Networks (IEEE 802.16j 멀티 홉 릴레이 네트워크에서의 핸드오버 성능 향상을 위한 이동성 지원 MAC 프로토콜)

  • Yang, Hyeon-Chae;Lee, Mee-Jeong
    • Journal of KIISE:Information Networking
    • /
    • v.35 no.5
    • /
    • pp.437-452
    • /
    • 2008
  • IEEE 802.16j MR networks introduce RSs (Relay Stations) within the IEEE 802.16 system in order to enhance the data throughput and extend the coverage. However, the current standardization defines that the BS (Base Station) controls MS's (Mobile Station's) handover, not only it induces the large signaling overhead but also handover latency could increase. In this paper, we propose a handover protocol in the MR networks where the high capability RSs that can process the MS's control functions are deployed. First, we classify the handover scenarios for the MR networks with the high capability RSs. Then, we define the MAC handover procedure, corresponding MAC management messages and the transmission routes for the proposed messages so that an 802.16e MS can perform seamless handover without noticing it is attached to an MR network. The simulation results show that the proposed handover protocol not only reduces the MAC management message overhead transferred through the wireless links compared to IEEE 802.16j/D1, which is the current standard for MR networks, but also performs the rapider and more secure MS handover than IEEE 802.16e and IEEE 802.16j/D1.

Validation Technique of Simulation Model using Weighted F-measure with Hierarchical X-means (WF-HX) Method (계층적 X-means와 가중 F-measure를 통한 시뮬레이션 모델 검증 기법)

  • Yang, Dae-Gil;HwangBo, Hun;Cheon, Hyun-Jae;Lee, Hong-Chul
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.2
    • /
    • pp.562-574
    • /
    • 2012
  • Simulation validation techniques which have been employed in most studies are statistical analysis, which validate a model with mean or variance of throughput and resource utilization as an evaluation object. However, these methods have not been able to ensure the reliability of individual elements of the model well. To overcome the problem, the weighted F-measure method was proposed, but this technique also had some limitations. First, it is difficult to apply the technique to complex system environment with numerous values of interarrival time because it assigns a class to an individual value of interarrival time. In addition, due to unbounded weights, the value of weighted F-measure has no lower bound, so it is difficult to determine its threshold. Therefore, this paper propose weighted F-measure technique with cluster analysis to solve these problems. The classes for the technique are defined by each cluster, which reduces considerable number of classes and enables to apply the technique to various systems. Moreover, we improved the validation technique in the way of assigning minimum bounded weights without any lack of objectivity.

Adequacy Analysis of Tunnel Management System in terms of Operational Safety (터널관리시스템의 안전운영 적정성 분석)

  • Park, Bumjin;Roh, Chang-Gyun;Moon, Byeongsup
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.14 no.5
    • /
    • pp.1-12
    • /
    • 2015
  • Length and the number of tunnels has increased 10% annually. Tunnel construction has positive effect in nature and driving condition. However, the structure of tunnels lead to a greater probability of major accidents. For this reason, tunnel is focusing its attention on the rapid incident handling and disaster management to build a tunnel management system in recently. In this study, tunnel management system adequacy analyzed in terms of operational safety using IPA and AHP analysis. IPA analysis results using the portfolio chart, incident management factors has a large gap between important and satisfaction. Disaster management is analyzed high ranking in priority. However, incident management factors are derived first priority in AHP analysis. This study determined that the results are meaningful to practitioners in the field is determined. In addition, practitioners comments should be reflected primarily for tunnel operational safely.

An Evaluation of Service Quality Priorities between Air Cargo Service Providers and Customers (항공화물운송서비스 품질에 대한 서비스 이용자와 제공자간의 중요도 인식 차이에 관한 연구)

  • Jun, Il-Soo;Hong, Seok-Jin
    • Journal of Korean Society of Transportation
    • /
    • v.22 no.5
    • /
    • pp.35-45
    • /
    • 2004
  • This paper analyzes the differences in the service quality priorities of air cargo service providers and customers. After having identified what constitutes the decisive factors with regards to air cargo service quslity, research was carried out to evaluate the differences in the service quality priorities of air cargo service providers and customers. Moreover, this paper analyzes these differences by separating air cargo service providers into Korean and international air cargo service providers. In order to attain the objectives of this research, the air cargo service sectors were divided into three general categories: supply capability(H/W), service accountability, and competitiveness of service fees and management capability(S/W). The researchers then placed 6 different criteria into each service category, for a total of 18. The evaluation of the service quality priorities of air cargo service providers and customers revealed very little difference between these two groups. With regards to the service criteria found in each service category, our research found marked differences between the service quality priorities of providers and customers in only three of the 18 criteria. However, we found marked differences in service quality priorities in 7 of the 18 criteria when the air cargo service providers were divided into Korean and international air cargo providers. While domestic air cargo service providers evaluated management's capability to handle cargo accidents and incidents as the most important priority, international air cargo service providers placed the highest priority on the cargo rate system. The results of this research imply that in order to properly evaluate the differences between the service quality priorities of air cargo service providers and customers, the air cargo service providers itself should be separated between the Korean air cargo service providers and the foreign providers because of their respective inherent perception on service quality.

A Frequency Domain DV-to-MPEG-2 Transcoding (DV에서 MPEG-2로의 주파수 영역 변환 부호화)

  • Kim, Do-Nyeon;Yun, Beom-Sik;Choe, Yun-Sik
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.38 no.2
    • /
    • pp.138-148
    • /
    • 2001
  • Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.

  • PDF

Implementation of CoAP/6LoWPAN over BLE Networks for IoT Services (BLE 네트워크 상에서 사물인터넷 서비스 제공을 위한 CoAP과 6LoWPAN 구현)

  • Kim, Cheol-Min;Kang, Hyung-Woo;Choi, Sang-Il;Koh, Seok-Joo
    • Journal of Broadcast Engineering
    • /
    • v.21 no.3
    • /
    • pp.298-306
    • /
    • 2016
  • With the advent of Internet of Things (IoT) technology that allows the communications between things and devices over the Internet, a lot of researches on the IoT services, such as smart home or healthcare, have been progressed. In the existing machine-to-machine (M2M) communications, however, since the underlying link-layer technologies, such as Bluetooth or ZigBee, do not use the Internet Protocol (IP) communication, those technologies are not suitable to provide the IoT services. Accordingly, this paper discusses how to provide the Internet services in the M2M communication, and propose an implementation of the Constrained Application Protocol (CoAP) over 6LoWPAN for providing IoT services in the BLE networks. Based on the implementation, we compared the performance between HTTP and CoAP for IoT communications. From the experimental results, we can see that the CoAP protocol gives better performance than the HTTP protocol with two times higher throughput, 21% faster transmission time, and 22% smaller amount of generated packets.

Hierarchical Feature Based Block Motion Estimation for Ultrasound Image Sequences (초음파 영상을 위한 계층적 특징점 기반 블록 움직임 추출)

  • Kim, Baek-Sop;Shin, Seong-Chul
    • Journal of KIISE:Software and Applications
    • /
    • v.33 no.4
    • /
    • pp.402-410
    • /
    • 2006
  • This paper presents a method for feature based block motion estimation that uses multi -resolution image sequences to obtain the panoramic images in the continuous ultrasound image sequences. In the conventional block motion estimation method, the centers of motion estimation blocks are set at the predetermined and equally spaced locations. This requires the large blocks to include at least one feature, which inevitably requires long estimation time. In this paper, we propose an adaptive method which locates the center of the motion estimation blocks at the feature points. This make it possible to reduce the block size while keeping the motion estimation accuracy The Harris-Stephen corner detector is used to get the feature points. The comer points tend to group together, which cause the error in the global motion estimation. In order to distribute the feature points as evenly as Possible, the image is firstly divided into regular subregions, and a strongest corner point is selected as a feature in each subregion. The ultrasound Images contain speckle patterns and noise. In order to reduce the noise artifact and reduce the computational time, the proposed method use the multi-resolution image sequences. The first algorithm estimates the motion in the smoothed low resolution image, and the estimated motion is prolongated to the next higher resolution image. By this way the size of search region can be reduced in the higher resolution image. Experiments were performed on three types of ultrasound image sequences. These were shown that the proposed method reduces both the computational time (from 77ms to 44ms) and the displaced frame difference (from 66.02 to 58.08).