• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.441-446
• /
• 2015

Chattering during the milling process causes severe problems on both the workpiece and cutting tools. However, chatter vibration is the inevitable phenomenon that operators require the prediction before the process or monitoring system to avoid the chatter in real-time. To predict the chatter vibration with the stability lobe diagram, the dynamic parameters of machine tool are extracted by considering cutting conditions and adapting the material properties. In this study, experimental verifications were taken for various aluminum types with different feed rates to observe the effect of the key parameters. The comparison between experimental results and the predictions was also performed.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.48-61
• /
• 1996

In the hot strip mill, not only the chatter vibration of finishing stands has a great influence on the surface quality of hot products, but also that is the major factors to shorten the life of rolling mill housings or to create the machine troubles. As long as the mill has been operating, the low frequency chatter at the early mill stands (No.2 and No.3) of POSCO's Kwangyang No.2 hot strip mill had been detected when rolling certain types of products, e.g., thinner gage, hard grade products. For several years, the experimental study was undertaken to analyze the cause of the chatter vibration and establish the methods to avoid the vibration to acceptable levels. The analysis and solution to the vibration problem with recommendations and revised maintenance practice are the subjects of this article.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.350-354
• /
• 1995

The Tension Leveller of Cold Rolling Mill In POSCO performs levelling the strip in high speed line. But minor variations in operating condition of driving machines such as motor, gear box, and support bearings, a small gap-variation of supporter and strip slip by poor roll revolutions can cause serious problems in the quality of strip. In this study, firstly, A condition monitoring standard for each sensor is made through with the detail analysis of vibration and strip slip. Secondly, An automatic monitoring and diagnosing system was developed to monitor the condition of Tension Leveller, and diagnose the cause of abnormal condition. Finally, A diagnosing algorithm for abnormal condition and man-machine interface (MMI) for easy operation are developed.