• Title/Summary/Keyword: 채널 구조

Search Result 1,976, Processing Time 0.027 seconds

Optimizations of 3D MRI Techniques in Brain by Evaluating SENSE Factors (삼차원 자기공명영상법의 뇌 구조 영상을 위한 최적화 연구: 센스인자 변화에 따른 신호변화 평가)

  • Park, Myung-Hwan;Lee, Jin-Wan;Lee, Kang-Won;Ryu, Chang-Woo;Jahng, Geon-Ho
    • Investigative Magnetic Resonance Imaging
    • /
    • v.13 no.2
    • /
    • pp.161-170
    • /
    • 2009
  • Purpose : A parallel imaging method provides us to improve temporal resolution to obtain three-dimensional (3D) MR images. The objective of this study was to optimize three 3D MRI techniques by adjusting 2D SESNE factors of the parallel imaging method in phantom and human brain. Materials and Methods : With a 3 Tesla MRI system and an 8-channel phase-array sensitivity-encoding (SENSE) coil, three 3D MRI techniques of 3D T1-weighted imaging (3D T1WI), 3D T2-weighted imaging (3D T2WI) and 3D fluid attenuated inversion recovery (3D FLAIR) imaging were optimized with adjusting SESNE factors in a water phantom and three human brains. The 2D SENSE factor was applied on the phase-encoding and the slice-encoding directions. Signal-to-noise ratio(SNR), percent signal reduction rate(%R), and contrast-to-noise ratio(CNR) were calculated by using signal intensities obtained in specific regions-of-interest (ROI). Results : In the phantom study, SENSE factor = 3 was provided in 0.2% reduction of signals against without using SENSE with imaging within 5 minutes for 3D T1WI. SENSE factor = 2 was provided in 0.98% signal reduction against without using SENSE with imaging within 5 minutes for 3D T2WI. SENSE factor = 4 was provided in 0.2% signal reduction against without using SENSE with imaging around 6 minutes for 3D FLAIR. In the human brain study, SNR and CNR were higher with SENSE factors = 3 than 4 for all three imaging techniques. Conclusion : This study was performed to optimize 2D SENSE factors in the three 3D MRI techniques that can be scanned in clinical time limitations with minimizing SNR reductions. Without compromising SNR and CNR, the optimum 2D SENSE factors were 3 and 4, yielding the scan time of about 5 to 6 minutes. Further studies are necessary to optimize 3D MRI techniques in other areas in human body.

  • PDF

Development of Preliminary Quality Assurance Software for $GafChromic^{(R)}$ EBT2 Film Dosimetry ($GafChromic^{(R)}$ EBT2 Film Dosimetry를 위한 품질 관리용 초기 프로그램 개발)

  • Park, Ji-Yeon;Lee, Jeong-Woo;Choi, Kyoung-Sik;Hong, Semie;Park, Byung-Moon;Bae, Yong-Ki;Jung, Won-Gyun;Suh, Tae-Suk
    • Progress in Medical Physics
    • /
    • v.21 no.1
    • /
    • pp.113-119
    • /
    • 2010
  • Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.

A Methodology of Ship Detection Using High-Resolution Satellite Optical Image (고해상도 광학 인공위성 영상을 활용한 선박탐지 방법)

  • Park, Jae-Jin;Oh, Sangwoo;Park, Kyung-Ae;Lee, Min-Sun;Jang, Jae-Cheol;Lee, Moonjin
    • Journal of the Korean earth science society
    • /
    • v.39 no.3
    • /
    • pp.241-249
    • /
    • 2018
  • As the international trade increases, vessel traffics around the Korean Peninsula are also increasing. Maritime accidents hence take place more frequently in the southern coast of Korea where many big and small ports are located. Accidents involving ship collision and sinking result in a substantial human and material damage as well as the marine environmental pollution. Therefore, it is necessary to locate the ships quickly when such accidents occur. In this study, we suggest a new ship detection index by comparing and analyzing the reflectivity of each channel of the Korea MultiPurpose SATellite-2 (KOMPSAT-2) images of the area around the Gwangyang Bay. A threshold value of 0.1 is set based on a histogram analysis, and all vessels are detected when compared with RGB composite images. After selecting a relatively large ship as a representative sample, the distribution of spatial reflectivity around the ship is studied. Uniform shadows are detected on the northwest side of the vessel. This indicates that the sun is in the southeast, the azimuth of the actual satellite image is $144.80^{\circ}$, and the azimuth angle of the sun can be estimated using the shadow position. The reflectivity of the shadows is 0.005 lower than the surrounding sea and ship. The shadow height varies with the position of the bow and the stern, perhaps due to the relative heights of the ship deck and the structure. The results of this study can help search technology for missing vessels using optical satellite images in the event of a marine accident around the Korean Peninsula.

A Study on the Presence of Post-Miesianism and Its Future (Post-Miesianism의 실체와 미래에 대한 연구)

  • Lee, Sang-Jin
    • Journal of architectural history
    • /
    • v.10 no.4 s.28
    • /
    • pp.77-92
    • /
    • 2001
  • 현대의 건축시기는 다원성의 시기 또는 복합성의 시기라고 불리운다. 모더니즘과 포스트모더니즘의 시기를 거치며 다양한 형태적 실험의 과정을 겪었고 수많은 이데올로기와 이론들로 무장된 논쟁의 역사도 갖게 되었다. 이러한 현대건축의 다양성은 건축디자인이라는 전문직의 사회에 기여하는 역할을 반추(反芻)함과 동시에 다변하는 인간사고의 역동성을 반영하고 있다. 건축관련 책자나 저널 등에서 흔히 발견할 수 있는 Neo-Classicism, Deconstructivism, Minimalism, High-Tech, New Moderns 등등의 건축양식들은 스타일을 지칭하는 언어라기보다는 건축적 사고를 지칭하는 언어라고 할 수 있다. 결국 건축디자인이라는 작업은 인간을 둘러 싼 건조환경의 생성에서 출발하는 것이므로 건축적 사고방식은 그 시기의 사회현상과 밀접한 관계를 맺게 된다. 20세기 말부터 불어닥친 디지털 문화의 사회변혁은 전 세계를 하나의 채널로 엮게 되었고, 이러한 영향들은 지역과 민족, 그리고 종교적인 요소들까지도 혼합하여 국경을 초월한 미래의 새로운 이상들을 꿈꾸게 되었다. 19세기 산업혁명과 함께 급속히 벨라진 인류문명의 진보는 필수적으로 세계화를 동반하는 것이고, 세계화와 지역성사이의 괴리를 통해 나타나는 문화적 비판과 충돌은 아직도 진행상태인 것이다. 세계화라는 통염은 문명의 보편성을 기반으로 하며 전통문화의 파괴가 뒤따를 수밖에 없는데, 현재와 같이 IT혁명을 통해 급속도로 빨라진 세계문화의 교류는 한 국가가 뿌리를 내리고 있는 문화적 유산이라는 토양을 포기하여야 할 단계에 와 있다고 논평할 정도이다. 여기서 건축은 문화적 상징으로 작용하게 되는데, 그것이 심미적이든 관습적이든 또는, 경제적이든 건축가는 해답의 제시라는 임무에 직면하게 된다. 20세기에 진행된 모더니즘의 건축은 구조와 공간에 대한 고전건축의 숙원을 고덕건축이 이룬 것처럼 15세기 르네상스 시대로부터 진행된 형태와 공간, 기능, 그리고 아름다움과 기술(technology) 또는 경제성 등에 대한 건축적 의문과 탐구를 일단락지었다고 할 수 있다. 이러한 모더니즘의 한복판에 Mies van der Rohe라는 거장이 깊은 발자국을 남기며 한 시대를 이루었고 그가 남긴 시대정신의 이념과 가치를 Miesianism이라고 부른다. 실용성과 도덕성을 근본으로 하는 Miesianism은 대중에 호소하는 미적 표현주의를 부정하고 지역정서를 중시하는 문맥적 접근방식을 경시함으로써 보편화라는 현상을 불러일으킨 국제주의 양식의 한 부류로 비판을 받아왔다. 즉, Miesianism의 단순하고 강렬한 외형적 요소는 그것이 내포하는 기술적 합리성이나 공간적 완결성을 무시한 채 전 세계에 영향을 미쳤고 동시에 지역적 저항을 받게 되었다. 시카고 및 전 세계의 Miesian들, 즉 Mies van der Rohe의 제자들이나 그로부터 영향을 받은 수많은 건축가들은 이러한 저항과 비판에 직면하게 되며 새로운 사고의 시대적 요구 앞에 고뇌하게 된다. 한국에서는 1978년 Mies van der Rohe의 제자인 김종성이 미국에서 서울로 돌아와 '서울건축컨설탄트'를 설립하며 본격적으로 Miesianism의 규범적 건축론을 설파하기 시작하였다. 이른바 시카고 국제주의학파의 건축전수라고 할 수 있는데 '서울건축컨설탄트'를 통하여 배출된 김종성의 제자들은 명쾌하고도 간결한 건축해법의 경험을 토대름대로의 정체성을 갖고자 노력하였으나 결국 다원적 가치를 요구하는 시대적 흐름 속에 혼란을 겪고 있는 것 또한 사실이다. 본 연구는 Miesianism의 기원을 밝히고 그것의 실수와 오류를 밝힘과 동시에 현대의 여러 가지 건축유형들과 비교하여 봄으로써 Post-Miesianism의 실체와 그 미래에 대하여 고찰하여 보고자 한다. 미스의 유산이라고 할 수 있는 Miesianism의 요체는 첫째, Schinkel로부터 이어받은 시대정신의 사명감, 둘째, Berlage가 전해준 전문가로서의 도덕성을 바탕으로 하여 이루어진 기술적 합리성의 실현, 그리고 마지막으로 그 당시의 추상예술에 대한 이해로써 받아들인 nee-Suprematism의 아방 가르데적인 자세라고 할 수 있다. 그러나 이것들을 전파하고 수용하는 과정에서 미스적인 단순하고 명쾌한 외관이 더욱 강한 인상을 남기게 되었고 또한 미스가 현대성의 본질이라고 믿는 기술의 전수는 모든 외관을 동일하게 만드는 International Style로서의 보편적 획일성을 초래하였다. Mies van der Rohe의 강력하고 규범적인 dogma는 그의 제자들에게는 강렬한 카리스마로 각인되었고, Mies가 원한 것이 아닐지라도 그들을 하나의 틀 속에 가두는 영향력을 행사하였다. 2세대이든 3세대이든 기술적 합리성과 추상적 단순미라는 믿음을 맹목적으로 추종할 때 그들은 Miesian으로 남아있게 되며, 거기서 벗어났을 때 non-Miesian, 또는 배신자로 취급하기까지 하였다. 이것은 미스의 제자들에게 강한 족쇄가 되어 형태적 또는 개념적 변화의 시도를 어렵게 하였고 시대적 요구에 부응하지 못한다는 평가에 이르게 되었다. 문화의 다양성과 역동성을 인정함과 동시에 Miesianism에 대한 새롭고 시대에 적합한 해석을 기대하게 되는데, 이러한 기대 속에서 우리는 Post-Miesianism이라는 새로운 유형을 엿볼 수 있게 된다. Post-Miesianism의 징후를 현대의 다양한 건축유형에서 발견할 수 있는데, High-Tech의 구축적이고 정밀한 건축 기술적 해법과 Minimalism의 반복성을 통한 추상미의 표현 등에서 뿐만이 아니라 Post-Modernism의 인간성의 추구나 문맥적 고려, 또는 해체주의의 형이상학적이고 아방가르데적인 실험주의 정신까지조차 Post-Miesianism이 공유할 수 있는 부분이 있다고 보여진다. 또한, 미스의 영향이 2세대, 3세대의 건축가들에게 미치면서 여러 방향으로 변질되어 가는 것을 우리는 발견할 수 있으며 그러한 시대성에 적응하는 시도들이야말로 새로운 미래를 향한 Post-Miesianism의 실체인 것이다. Mies가 말하였듯이 한 시대의 끝은 그 시대가 완전히 이해되었을 때이며, 모더니즘의 숙제는 아직 해결되지 않았으므로 Miesianism의 탐구는 Post-Miesianism이라는 새로운 주제로 계속될 것이다. 이를 통하여 21세기 디지털 문명의 시대 속에서 현대건축이 안을 수밖에 없는 보편성과 지역성의 충돌이라는 문제의 해결에 한 발걸음 다가갈 수 있기를 기대하여 본다.

  • PDF

Development of a Finger Tactile Stimulator Based on E-Prime Software (E-Prime에 기반한 손가락 촉각 자극기의 개발)

  • Kim, Hyung-Sik;Min, Yoon-Ki;Kim, Bo-Seong;Min, Byung-Chan;Yang, Jae-Woong;Lee, Su-Jeong;Choi, Mi-Hyun;Yi, Jeong-Han;Tack, Gye-Rae;Lee, Bong-Soo;Jun, Jae-Hoon;Chung, Soon-Cheol
    • Science of Emotion and Sensibility
    • /
    • v.13 no.4
    • /
    • pp.703-710
    • /
    • 2010
  • In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.

  • PDF

Expression and Purification of the Phosphatase-like Domain of a Voltage-Sensing Phosphatase, Ci-VSP (막 전위 감지 탈인산화 효소, Ci-VSP의 유사 탈인산화 효소 도메인의 발현과 정제)

  • Kim, Sung-Jae;Kim, Hae-Min;Choi, Hoon;Kim, Young-Jun
    • Journal of Life Science
    • /
    • v.21 no.7
    • /
    • pp.1032-1038
    • /
    • 2011
  • Recently identified Ciona intestinalis voltage sensor-containing phosphatase (Ci-VSP) consists of an ion channel-like transmembrane domain (VSD) and a phosphatase-like domain. Ci-VSP senses the change of membrane potential by its VSD and works as a phosphoinositide phosphatase by its phosphatase domain. In this study, we present the construction of His-tagged phosphatase-like domain of Ci-VSP, its recombinant expression and purification, and its enzymatic activity behavior in order to examine the biochemical behavior of phosphatase domain of Ci-VSP without interference. We found that Ci-VSP(248-576)-His can be eluted with an elution buffer containing 25 mM NaCl and 100 mM imidazole during His-tag purification. In addition, we found the proper measurement condition for kinetics study of Ci-VSP(248-576)-His against p-nitrophenyl phosphate (pNPP). We measured the kinetic constant of Ci-VSP(248-576)-His at $37^{\circ}C$, pH 5.0 or 5.5, under 30 min of reaction time, and less than $2.0\;{\mu}g$ of protein amount. With these conditions, we acquired that Ci-VSP(248-576)-His has $K_m$ of $354{\pm}0.143\;{\mu}M$, $V_{max}$ of $0.0607{\pm}0.0137\;{\mu}mol$/min/mg and $k_{cat}$ of $0.359{\pm}0.009751\;min^{-1}$ for pNPP dephosphorylation. Therefore, we produced a pure form of Ci-VSP(248-576)-His, and this showed a higher activity against pNPP. This purified protein will provide the road to a structural investigation on an interesting protein, Ci-VSP.

A Study on the Field Data Applicability of Seismic Data Processing using Open-source Software (Madagascar) (오픈-소스 자료처리 기술개발 소프트웨어(Madagascar)를 이용한 탄성파 현장자료 전산처리 적용성 연구)

  • Son, Woohyun;Kim, Byoung-yeop
    • Geophysics and Geophysical Exploration
    • /
    • v.21 no.3
    • /
    • pp.171-182
    • /
    • 2018
  • We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

Enhancement of the Working Capacity and Selectivity Factor of Calcium-Exchanged Y Zeolites for Carbon Dioxide Pressure Swing Adsorption (이산화탄소 압력순환흡착을 위한 칼슘 이온교환 Y 제올라이트의 작업용량과 선택계수 향상)

  • Kim, Moon Hyeon
    • Clean Technology
    • /
    • v.24 no.1
    • /
    • pp.41-49
    • /
    • 2018
  • Y zeolites with different extra-framework cations, such as $Na^+$, $N^+$, $Ca^{2+}$, and $Cu^{2+}$, with different charge and ionic radius have been investigated to greatly enhance a working capacity (W) of $CO_2$ adsorption at $25^{\circ}C$ and a $CO_2/CO$ selectivity factor (S). A sample of NaY with a very small amount of 0.012% $Ca^{2+}$ was fully reversible for seven times repeated $CO_2$ adsorption/desorption cycles, thereby forming no surface carbonates unlikely earlier reports. Although at pressures above 4 bar, 2.00% CaY, 1.60% CuY and 1.87% LiY all showed a $CO_2$ adsorption very similar to that measured for NaY, they gave a significant decrease in the adsorption at lower pressures, depending on the metal ion. At 0.5 ~ 2.5 bar, the extent of $CO_2$ adsorption was in the order NaY > 1.60% CuY > 2.00% CaY > 1.87% LiY. All the $Na^+-based$ metals-exchanged zeolites have a FAU (faujasite) framework and a Si/Al value near 2.6; thus, there is no discernible difference in the framework topology, framework chemical compositions, effective aperture size, and channel structure between the zeolite samples. Therefore, the distinctive behavior in the adsorption of $CO_2$ with a character as a weak Lewis acid is associated with the site basicity of the zeolites, and the interaction potentials of the cations. Different trend was shown for a CO adsorption due to weaker quadrupole interactions. Adsorption of $CO_2$ and CO on samples of CaY with 0.012 to 5.23% Ca disclosed a significant dependence on the Ca loading. The $CO_2$ adsorption increased when the cation exists up to ca. 0.05%, while it decreased at higher Ca amounts. However, values for both W and S could greatly increase as the bare zeolite is enriched by $Ca^{2+}$ ions. The 5.23% CaY had $W=2.37mmol\;g^{-1}$ and S = 4.37, and the former value was comparable to a benchmark reported in the literature.

Mammalian Reproduction and Pheromones (포유동물의 생식과 페로몬)

  • Lee, Sung-Ho
    • Development and Reproduction
    • /
    • v.10 no.3
    • /
    • pp.159-168
    • /
    • 2006
  • Rodents and many other mammals have two chemosensory systems that mediate responses to pheromones, the main and accessory olfactory system, MOS and AOS, respectively. The chemosensory neurons associated with the MOS are located in the main olfactory epithelium, while those associated with the AOS are located in the vomeronasal organ(VNO). Pheromonal odorants access the lumen of the VNO via canals in the roof of the mouth, and are largely thought to be nonvolatile. The main pheromone receptor proteins consist of two superfamilies, V1Rs and V2Rs, that are structurally distinct and unrelated to the olfactory receptors expressed in the main olfactory epithelium. These two type of receptors are seven transmembrane domain G-protein coupled proteins(V1R with $G_{{\alpha}i2}$, V2R with $G_{0\;{\alpha}}$). V2Rs are co-expressed with nonclassical MHC Ib genes(M10 and other 8 M1 family proteins). Other important molecular component of VNO neuron is a TrpC2, a cation channel protein of transient receptor potential(TRP) family and thought to have a crucial role in signal transduction. There are four types of pheromones in mammalian chemical communication - primers, signalers, modulators and releasers. Responses to these chemosignals can vary substantially within and between individuals. This variability can stem from the modulating effects of steroid hormones and/or non-steroid factors such as neurotransmitters on olfactory processing. Such modulation frequently augments or facilitates the effects that prevailing social and environmental conditions have on the reproductive axis. The best example is the pregnancy block effect(Bruce effect), caused by testosterone-dependent major urinary proteins(MUPs) in male mouse urine. Intriguingly, mouse GnRH neurons receive pheromone signals from both odor and pheromone relays in the brain and may also receive common odor signals. Though it is quite controversial, recent studies reveal a complex interplay between reproduction and other functions in which GnRH neurons appear to integrate information from multiple sources and modulate a variety of brain functions.

  • PDF

Time-Lapse Crosswell Seismic Study to Evaluate the Underground Cavity Filling (지하공동 충전효과 평가를 위한 시차 공대공 탄성파 토모그래피 연구)

  • Lee, Doo-Sung
    • Geophysics and Geophysical Exploration
    • /
    • v.1 no.1
    • /
    • pp.25-30
    • /
    • 1998
  • Time-lapse crosswell seismic data, recorded before and after the cavity filling, showed that the filling increased the velocity at a known cavity zone in an old mine site in Inchon area. The seismic response depicted on the tomogram and in conjunction with the geologic data from drillings imply that the size of the cavity may be either small or filled by debris. In this study, I attempted to evaluate the filling effect by analyzing velocity measured from the time-lapse tomograms. The data acquired by a downhole airgun and 24-channel hydrophone system revealed that there exists measurable amounts of source statics. I presented a methodology to estimate the source statics. The procedure for this method is: 1) examine the source firing-time for each source, and remove the effect of irregular firing time, and 2) estimate the residual statics caused by inaccurate source positioning. This proposed multi-step inversion may reduce high frequency numerical noise and enhance the resolution at the zone of interest. The multi-step inversion with different starting models successfully shows the subtle velocity changes at the small cavity zone. The inversion procedure is: 1) conduct an inversion using regular sized cells, and generate an image of gross velocity structure by applying a 2-D median filter on the resulting tomogram, and 2) construct the starting velocity model by modifying the final velocity model from the first phase. The model was modified so that the zone of interest consists of small-sized grids. The final velocity model developed from the baseline survey was as a starting velocity model on the monitor inversion. Since we expected a velocity change only in the cavity zone, in the monitor inversion, we can significantly reduce the number of model parameters by fixing the model out-side the cavity zone equal to the baseline model.

  • PDF