• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제46권8호
• /
• pp.117-124
• /
• 2009

This paper describes a 3 to 5 GHz frequency synthesizer for MB-OFDM (Multi-Band OFDM) UWB (Ultra- Wideband) application using 0.13 ${\mu}m$ CMOS process. The frequency synthesizer operates in the band group 1 whose center frequencies are 3432 MHz 3960 MHz, and 4488 MHz. To cover the overall frequencies of group 1, an efficient frequency planning minimizing a number of blocks and the power consumption are proposed. And, a high-frequency VCO and LO Mixer architecture are also presented in this paper. A new mixed coarse tuning scheme that utilizes the MIM capacitance, the varactor arrays, and the DAC is proposed to expand the VCO tuning range. The frequency synthesizer can also provide the clock for the ADC in baseband modem. So, the PLL for the ADC in the baseband modem can be removed with this frequency synthesizer. The single PLL and two SSB-mixers consume 60 mW from a 1.2 sV supply. The VCO tuning range is 1.2 GHz. The simulated phase noise of the VCO is -112 dBc/Hz at 1 MHz offset. The die area is 2 ${\times}$ 2mm$^2$.

• Journal of Broadcast Engineering
• /
• 제20권1호
• /
• pp.140-152
• /
• 2015

HCI(Human Computer Interaction) enables the interaction between people and computers by using a human-familiar interface called as Modality. Recently, to provide an optimal interface according to various devices and service environment, an advanced HCI method using multiple modalities is intensively studied. However, the multimodal interface has difficulties that modalities have different data formats and are hard to be cooperated efficiently. To solve this problem, a multimodal communicator is introduced, which is based on EMMA(Extensible Multimodal Annotation Markup language) and MMI(Multimodal Interaction Framework) of W3C(World Wide Web Consortium) standards. This standard based framework consisting of modality component, interaction manager, and presentation component makes multiple modalities interoperable and provides a wide expansion capability for other modalities. Experimental results show that the multimodal communicator is facilitated by using multiple modalities of eye tracking and gesture recognition for a map browsing scenario.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권11호
• /
• pp.1254-1264
• /
• 2008

This paper suggests an extended memory polynomial model that improves accuracy in modeling memory effects of RF power amplifiers(PAs), and verifies effectiveness of the suggested method. The extended memory polynomial model includes cross-terms that are products of input terms that have different delay values to improve the limited accuracy of basic memory polynomial model that includes the diagonal terms of Volterra kernels. The complexity of the memoryless model, memory polynomial model, and the suggested model are compared. The extended memory polynomial model is represented with a matrix equation, and the Volterra kernels are extracted using least square method. In addition, the structure of digital predistorter and digital signal processing(DSP) algorithm based on the suggested model and indirect learning method are proposed to implement a digital predistortion linearization. To verify the suggested model, the predicted output of the model is compared with the measured output for a 10W GaN HEMT RF PA and 30 W LDMOS RF PA using 2.3 GHz WiBro input signal, and adjacent-channel power ratio(ACPR) performance with the proposed digital predistortion is measured. The proposed model increases model accuracy for the PAs, and improves the linearization performance by reducing ACPR.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.105-119
• /
• 2003

일반적인 로봇시스템은 자신이 이동해야 할 목표 지점을 자율적으로 생성할 수 없으므로 어떤 다른 시스템의 정보를 이용하여 주변을 탐색하거나 장애물을 인식하고 식별하여 자신의 제어전략을 수립한다. 그러므로 본 논문에서 제시한 시스템은 초소형 비행체를 이용하여 주위 환경과 자율 이동로봇의 위치 정보를 탐색할 수 있도록 시스템을 구성하였다 이러한 시스템의 성능은 로봇이 위치하고 있는 주위의 불완전한 정보로부터 적절한 결론을 유도해 낼 수 있어야 한다. 그러한 비선형적인 문제는 현재까지도 문제 해결을 위해 많은 연구가 진행되고 있다. 본 연구에서는 자율이동로봇의 행동 환경을 공간상의 제약을 받지 않는 비선형 시스템인 초소형 비행체에 극초단파(UHF16채널) 영상장치를 이용하여 호스트 PC로 전송하고 호스트 PC는 로봇의 현재 위치, 이동해야 할 목표위치, 장애물의 위치와 형태 등을 분석한다. 분석된 결과 파라메타는 RF-Module을 이용해서 로봇에 전송하고, 로봇은 그 데이터를 분석하여 동작하게 된다. 로봇이 오동작 또는 장애물로 인해 정확한 목적지까지 도달하지 못할 때 호스트 PC는 새로운 최단경로를 생성하거나 장애물을 회피 할 새로운 전략을 로봇에게 보내준다. 본 연구에 적용한 알고리즘은 초소형 비행체에서 탐지한 불완전한 영상정보에서도 비교적 신뢰도 놀은 결과를 보이는 A* 알고리즘을 사용하였다 적용한 알고리즘은 실험을 통하여 실시간으로 정보를 처리할 수 있었으며, 자율 이동로봇의 충돌회피나 최단 경로 생성과 같은 문제를 실험을 통하여 그 성능과 타당성을 검토하였다.delta}textitH]$를 도출하였다.rc}C$에서 30 ㎫의 압력으로 1시간동안 행하였다 소결한 시편들은 직사각형 형태로 가공하였으며 표면은 0.5$\mu\textrm{m}$의 다이아몬드 입자로 연마하였다. XRD, SEM 및 TEM을 이용하여 상분석 및 미세조직관찰을 행하였다. 파괴강도는 3중점 굽힘 법으로 (3-point bending test) 측정하였다. 이때 시편 하부의 지지 점간의 거리는 30mm, cross-head 속도는 0.5 mm/min으로 하였고 5개의 시편을 측정하여 평균값을 구하였다.ell/\textrm{cm}^3$, 혼합재료 3은 0.123$\ell/\textrm{cm}^3$, 0.017$\ell/\textrm{cm}^3$, 혼합재료 4는 0.055$\ell/\textrm{cm}^3$, 0.016$\ell/\textrm{cm}^3$, 혼합재료 5는 0.031$\ell/\textrm{cm}^3$, 0.015$\ell/\textrm{cm}^3$, 혼합재료 6은 0.111$\ell/\textrm{cm}^3$, 0.020$\ell/\textrm{cm}^3$로 나타났다. 3. 단일재료의 악취흡착성능 실험결과 암모니아는 코코넛, 소나무수피, 왕겨에서 흡착능력이 우수하게 나타났으며, 황화수소는 펄라이트, 왕겨, 소나무수피에서 다른 재료에 비하여 상대적으로

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제45권6호
• /
• pp.117-122
• /
• 2008

Although the pulse diagnosis is the one of the most important diagnostic process to traditional medical doctors, there is no proper communication tool between experts and trainees. In this paper, we have developed a indentation training system which consists of a hardware measuring indent pressure on artificial arm quantitatively and a software providing a indentation training program. The hardware for measurement of indent pressure profile includes 3 load cells embedded in the artificial arm, signal amplification part and digitization part, NI-USB 6009 with 200Hz sampling rate. For setting up a relationship table between weights and output voltages, 8 standard weights were used. To evaluate this hardware, 3 oriental medical specialists were involved and their indent pressure profile were recorded three times respectively. From these, it was found that pulse diagnosis process could be divided into 3 periods and the maximum load were $500g{\cdot}f$ approximately while doctors perform a pulse diagnosis. The indentation training program was implemented with LabView and designed to monitor the differences between the pressure profile of a expert and that of a trainee so to offer some visual feedback to the trainee. Also, this program could provide the trends of training performances. With this developed system, the education of pulse diagnosis is expected to be more quantitative and effective.

• Progress in Medical Physics
• /
• 제27권1호
• /
• pp.37-45
• /
• 2016

In proton therapy, in vivo proton beam range verification is very important to deliver conformal dose to the target volume and minimize unnecessary dose to normal tissue. For this purpose, a multi-slit prompt-gamma camera module made of 24 scintillation detectors and 24-channel signal processing system is under development. In the present study, we have developed and tested a dual-mode signal processing system, which can operate in the energy calibration mode and the fast data acquisition mode, to process the signals from the 24 scintillation detectors. As a result of performance test, using the energy calibration mode, we were able to perform energy calibration for the 24 scintillation detectors at the same time and determine the discrimination levels for the detector channels. Further, using the fast data acquisition mode, we were able to measure a prompt-gamma distribution induced by a 45 MeV proton beam. The measured prompt gamma distribution was found similar to the proton dose distribution at the distal fall-off region, and the estimated beam range was $17.13{\pm}0.76mm$, which is close to the proton beam range of 16.15 mm measured by an EBT film.

• Journal of Broadcast Engineering
• /
• 제11권1호
• /
• pp.66-79
• /
• 2006

As constant development of digital broadcasting and data broadcasting system, new technology will be introduced to digital broadcasting and new broadcasting service will be appeared. These services need to be changed and processed to suit each services and the software of the receiver need to be upgraded. Though, generally the digital broadcasting receivers are not getting updated once it's delivered to home for long time and it need to be done by hand or collected each one of them with trouble. Therefore this paper suggests a way to overcome these difficulties via broadcasting stream. This research is to describe how three modules-namely (1) Downloader, downloads new software from data carrousel stream, (2) Update Loader, installs the software received by downloader; and (3) Recoverer, recovers the former version of the software if some serious problem has been occurred during downloading and installing the software. This paper tries to realize the accommodation of terrestrial STB based on the new technique and service following ATSC A-97 agreement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권11호
• /
• pp.469-478
• /
• 2019

Car-sharing services have been settled on as a new type of public transportation owing to their enhanced convenience, expanded awareness of practical consumption patterns, the inspiration for environmental conscientiousness, and the diffusion of smart phones following the economic crisis. With development of the market, many people have started using such services. However, security is still an issue. Damage is expected since IDs and passwords are required for log-in when renting and controlling the vehicles. The protocol suggested in this study uses bio-information, providing an optimized service, and convenient (but strong) authentication with various service-provider clouds registering car big data about users through brokers. If using the techniques suggested here, it is feasible to reduce the exposure of the bio-information, and to receive service from multiple service-provider clouds through one particular broker. In addition, the proposed protocol reduces public key operations and session key storage by 20% on mobile devices, compared to existing car-sharing platforms, and because it provides convenient, but strong, authentication (and therefore constitutes a secure channel), it is possible to proceed with secure communications. It is anticipated that the techniques suggested in this study will enhance secure communications and user convenience in the future car-sharing-service cloud environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제20권5호
• /
• pp.902-910
• /
• 2016

Recently, the volume of mobile data traffic increases exponentially due to the emergence of various mobile services. In order to resolve the problem of mobile traffic increase, various new technologies have been devised. Especially, two-way relay communication in which two nodes can transfer data simultaneously through relay node, has gained lots of interests due to its capability to improve spectral efficiency. In this paper, we analyze the SM-PNC which combines Physical-layer Network Coding (PNC) and Spatial Modulation (SM) under two-way relay communication environment. Log-Likelihood Ratio (LLR) is considered and both separate decoding and direct decoding have been taken into account in performance analysis. Through performance evaluation, we have found that the bit error rate of the proposed scheme is improved compared to that of the conventional PNC scheme, especially when SNR is high and the number of antennas is large.

• Journal of Korea Society of Industrial Information Systems
• /
• 제19권1호
• /
• pp.13-18
• /
• 2014

Sensor nodes are used for monitoring and collecting the environmental data via wireless sensor network. The wireless sensor network with various sensor nodes draws attention as a key technology in ubiquitous computing. Sensor nodes has very small memory capacity and limited power resource. Thus, it is essential to have energy efficient strategy for the sensor nodes. Since the sensor nodes are operating on the same frequency bands with ISM frequency bands, the interference by the devices operating on the ISM band degrades the quality of communication integrity. In this paper, the convolutional code is proposed instead of ARQ for the error control for the sensor network. The proposed convolutional code was implemented and the BER performance is measured. For the fixed transmitting powers of -19.2 dBm and -25dBm, the BER with various communication distances are measured. The packet loss rate and the retransmission rate are calculated from the measured BER. It is shown that the porposed method obtained about 9~12% and 12-19% reduction in retransmission rate for -19.2 dBm and -25 dBm respectively.