• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.316-322
• /
• 2002

The Orthogonal Frequency Division Multiplexing(OFDM) is a special case of multicarrier transmission, where a single data stream is divided into many subcarriers and transferred in a parallel way. It reduces the necessary bandwidth using the orthogonality between the subcarriers. Therefore it requires the transmission channel which has stable characteristic. When the delay spread of the channel exceed the guard interval, then the orthogonality of the subcarriers cannot maintain and as a result the system performance degrade. In this paper, the XCP-OFDM(OFDM using cross-handed Circular Polarization) system is newly proposed. This system divides the channel in order to eliminate the overlapping of subcarrier's spectrum by using cross-handed circular polarization. Therefore, the proposed XCP-OFDM system can improve the performance without increasing the guard interval. Both theoretical analysis and simulation results are described.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.133-140
• /
• 2008

The cable TV network has delivered downward broadcasting signals from distribution centers to subscribers. Since the traditional coaxial cable has been upgraded by the Hybrid Fiber Coaxial(HFC) cable, the upward channels has expanded broadband services such as Internet. This upward channel is vulnerable to ingress noises. When the noises from the children nodes accumulated in an amplifier exceeds a certain level, that node has to be cut off to prevent the noise propagation. The node selection problem(NSP) is defined to select nodes so that the noise in each node does not exceed the given threshold value and the sum of Profits of selected nodes can be maximized. The NSP has shown to be NP-hard. In this paper, we have proposed heuristics to find the near-optimal solution for NSP. The experimental results show that interval partitioning is better than greedy approach. Our heuristics can be used by the HFC network management system to provide privileged services to the premium subscribers on HFC networks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.123-130
• /
• 2016

In this paper, a novel flexible microfluidic metamaterial absorber is proposed for remote chemical sensor applications. The proposed metamaterial absorber consists of a periodic of split-ring-cross resonators(SRCRs) and a microfluidic channel. The SRCR patterns are inkjet-printed using silver nanoparticle inks on paper. The microfluidic channels are laser-etched on polydimethylsiloxane(PDMS) material. The proposed absorber can detect change of the effective permittivity at different liquids. Therefore, the absorber can be used for a remote chemical sensor by detecting change of the resonant frequencies. The performance of the proposed absorber is demonstrated with full-wave simulation and measurement results. The experimental results shows that the resonant frequency is 10.49 GHz at the empty channel. When ethanol and DI-water are injected into the channel, the resonant frequencies are 10.04 GHz and 8.9 GHz, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2839-2846
• /
• 2014

New VHF band for use in VDE is determined by WRC-12 due to the overload of AIS VDL, and the system characteristics of the VDE is recommended as ITU-R M. 1842-1. CS-TDMA, a multiple access method of AIS class B, is recommended as that of the VDE. It is inefficient for CS-TDMA just applying the report interval used in AIS class B to transmit high speed data with higher payload in the aspect of efficiency. In this paper, a simulation is executed in order to determine adequate report interval according to the number of active ships that affects directly network traffic. To this end, the performance of CS-TDMA, which includes the number of received packets, reception success rate, channel utilization, and collision rate, is investigated via a simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.31-34
• /
• 2018

This paper presents a low-power buck-boost converter for multi-input energy harvesting systems. The designed circuit combines the energy harvested from three input channels in real time and stores it in a storage capacitor. The structure of the buck-boost converter is simplified by using one external inductor and applying time division technique using an arbiter. In addition, to improve the efficiency of the system, the controller circuits of the converter are designed so that current consumption is minimized. The proposed circuit is designed with $0.35{\mu}m$ CMOS process. Simulation results show that the designed circuit consumes up to 490nA of current when all three input channels are active, and the maximum power efficiency is 92%. The chip area of the designed circuit is $1310{\mu}m{\times}1100{\mu}m$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.309-316
• /
• 2010

In this study, a digital particle holographic system and its application to channel-flow measurements were investigated. A double-exposure hologram recording system that is capable of recording digital holograms in a short time interval was developed. A correlation coefficient method was used to determine the focal plane of particles. The Wiener filter was used to remove noises and improve image quality. Two-threshold and image segmentation methods were used for binary image transformation. The cross-correlation method was used for particle pairing. The developed system was employed to study channel flow fields, and the axial velocities of channel flow were measured. The measurement errors are acceptable, and this proves the feasibility of using the digital particle holographic system as a good tool for flow-field measurements.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.28-32
• /
• 2014

In this paper, we analyzed the performance of cyclostationary signal detection scheme for LTE system. We applied the cyclostationary signal detection scheme to the cognitive radio(CR) technology, which improves the usage efficiency of spectrums and shares frequencies, and we detected the signal in the long term evolution(LTE) band. LTE system has been designated as the standard to improve the maximum data rate and provide the low latency in the 3rd generation partnership project(3GPP). In this paper, we generated the LTE signals based on the orthogonal frequency division multiple access(OFDMA) and analyzed the performance of signal detection in accordance with the segment and threshold of the generated signals. Gaussian channel was used in the simulation and we discussed the future studies to apply the CR to the LTE system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.197-203
• /
• 2013

Optical power optimization of 10 Gbps 40 wavelength division multiplexing channels was analyzed at the 3000 km long-haul transmission distance when the link span distance was changed between 40 km and 140 km. The signal performance of the transmission was obtained as a Q value and it was compared when input power into SSMF and input power into DCF on the transmission link were changed. The optimized input power into SSMF increased linearly to link span distance with 1 dB/km. The optimized power into DCF increased linearly with 0.5 dB/km up to 100 km link span, but it had no variation at longer link span than 100 km.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.159-164
• /
• 2019

Detecting wildfire using only color in image information is a very difficult issue. This paper proposes an algorithm to detect forest fire area by analyzing color and motion of the area in the video including forest fire. The proposed algorithm removes the background region using the Gaussian Mixture based background segmentation algorithm, which does not depend on the lighting conditions. In addition, the RGB channel is changed to an HSV channel to extract flame candidates based on color. The extracted flame candidates judge that it is not a flame if the area moves while labeling and tracking. If the flame candidate areas extracted in this way are in the same position for more than 2 minutes, it is regarded as flame. Experimental results using the implemented algorithm confirmed the validity.

• Information Systems Review
• /
• v.5 no.2
• /
• pp.1-21
• /
• 2003

In this paper, we investigate industrial product intermediary's transformation strategy by exploiting advantages afforded by web based information technologies. Our motivation for this research stems from exploring intermediary's responding strategy to cope with supplier's threatening to disintermediation. From transaction cost perspective, internet can induce both the vertical quasi-integration (electronic hierarchy) and outsourcing (electronic market). Our rationale on directing one of these bi-directional movements is specified on intermediary's value adding on the supply chain. As such, we investigated supply chain performance, IT effects on customer's requirement of channel functions, and channel power structure. Propositions to suggest contingent e-transforming strategic alternatives are logically derived from dyadic nature of supply chain characteristics such as efficiency versus customer services, and supplier dominant versus easy replaceability of suppliers. The contingent e-transformation framework developed from intermediary's perspective is reviewed through longitudinal industry case analysis. Implications from the industry case analysis give us insights for the effectiveness of the framework to combine supply chain characteristics with intermediary's e-transformation.