• Journal of radiological science and technology
• /
• v.46 no.6
• /
• pp.519-526
• /
• 2023

This study was intended to evaluate the shielding rate of radiation shields manufactured using 3D printers that have recently been used in various fields by comparing them with existing shields made of lead, and to find out their applicability through experiments. A 3D printer shield made of tungsten filament 1 mm, 2 mm, 4 mm shield, RNS-TX (nanotungsten) 1.1 mm, lead 0.2 mmPb, and 1mmPb were exposed to ^99mTc, ¹⁸F, and ²⁰¹TI for 15, 30, 45 minutes, and 60 minutes after measuring cumulative dose three times. Based on this, the shielding rate of each shield was calculated based on the dose in the absence of the shield. In addition, ^99mTc, ¹⁸F, and ²⁰¹TI were located 100 cm away from the phantom in which the OSLD nano Dot device was inserted, and if there was no shield for 60 minutes, the dose of thyroid was measured using 1.0 mm of lead shield, 1.1 mm of RNS-TX shield, and 2 mm of tungsten shield made by 3D printer. The use of shields during radiation shielding emitted from open radiation sources all resulted in a reduction in dose. The radiation dose emitted from the radionuclides under the experiment was all reduced when the shield was used. This study has been confirmed that tungsten is a material that can replace lead due to its excellent performance and efficiency as shield, and that it even shows the possibility of manufacturing a customized shield using 3D printer.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.155-169
• /
• 2007

A transport container for a 500 kCi tritium storage vessel was developed, which could be used for the transport of metal tritide from Wolsong TRF facility to a disposal site. The structural, thermal, shielding, and confinement analyses were performed for the container in a view of Type B. As a result of structural analysis, the developed container sustained its integrity under normal and accidental conditions. The maximum temperature increase of the inner storage vessel by radiation was evaluated at $134.8^{\circ}C at room temperature. In $800^{\circ}C$ fire test, The thermal barrier of container sustained the inner vessel at $405^{\circ}C after 30 min, which temperature was allowable for the container integrity since maximum design temperature of inner vessel was $550^{\circ}C. In the evaluation of the shielding, the activity of radiation was nearly zero on the outer surface of inner vessel. Consequently the transport container for a 500 kCi tritium was evaluated to pass all the safety tests including accidental condition, so it was concluded that the designed transport container is proper to be used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.735-741
• /
• 2016

Increasing the total length of waveguide-below-cutoff array(WBCA) as it is used to the duct in order to enhance shielding effectiveness, the design could cause higher cost, higher levels of difficulties in construction and the interruption a flow velocity. The multi-layered WBCA can compensate for this problem, which can be designed by crossing each waveguide layer. By conducting simulations from 2-layer to 8-layer structure, it can be observed that the shielding effectiveness increases from 52 dB to 75 dB. Comparing with the original WBCA in a shape of mono layer rectangular, our proposed waveguide becomes similar with the original value as the number of crossing layer increases. In addition, the analysis with the flow of fluid in the duct installed multi-layered WBCA are required. We demonstrate this analysis by doing the flow of fluid simulation, and concluded that the multi-layered WBCA has loss of flow of fluid less than unit rectangular WBCA.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.6
• /
• pp.711-718
• /
• 2019

Spectrum analyzer and electromagnetic field meter were used to investigate the EM generation behaviour in different types of home electrical appliances. During microwave oven operation, the EM power measured at a point 30cm apart was measured in the range of 8~11mW/㎡, the strength of the low frequency magnetic field was 60~80mG and the electric field strength was measured at 150~160V/m. For smart phone wireless charging pad, it was measured at an electromagnetic power of 0.4mW/㎡, an electric field of 160 V/m and a magnetic field of 1mG at a point 10cm away. For microwave oven and wireless charging pad, if used within 10cm, the size of the electric field has been measured at a large value that exceeds the human body protection standard and may be hazardous to humans. On the other hand, home appliances such as TVs, hairdryers and refrigerators all showed very low levels of electromagnetic waves, electric fields and magnetic fields, with no harmful effects seen. For electromagnetic shielding, the metal Cu fabric and metal foil had a high level of EM shielding, while polymer films had a low EM shielding characteristic.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.200.1-200.1
• /
• 2015

Charge trap flash (CTF) 메모리 소자는 기존의 플로팅 게이트를 사용한 플래시 메모리 소자에 비해 쓰고 지우는 속도가 빠르고, 소비 전력이 적으며, 쓰고 지우는 동작에 의한 전계 스트레스에 잘 견뎌내는 장점을 가지고 있다. 그러나 CTF 메모리 소자에서도 메모리 셀의 크기가 작아짐에 따라 셀 사이의 간섭 효과를 무시할 수 없다. 인접 셀 간의 간섭현상은 측정 셀의 문턱전압을 예측할 수 없게 변화시켜 소자 동작의 신뢰성을 낮추고 성능을 저하시킨다. 본 논문에서는 셀 사이의 간섭을 줄이고 소자의 성능을 향상시키기 위해 charge trap 층에 금속 공간층을 삽입한 CTF메모리 소자의 전기적인 특성에 대해 연구하였다. 금속 공간층을 갖는 CTF 메모리 소자는 기존 CTF 메모리 소자의 트랩층 양 측면에 절연막과 금속 공간층을 증착시켜 게이트가 트랩층을 감싸는 구조를 갖는다. 인접 셀 사이에 발생하는 간섭 현상과 전계 분포를 분석하였다. 프로그램 동작 시CTF 메모리 소자 내에 형성되는 전계의 분포와 크기를 계산함으로 금속 공간층이 인접한 셀에서 형성된 전계를 차폐시켜 셀 간 간섭 현상을 최소화하는 것을 확인하였다. 이러한 결과는 인접 셀 간의 간섭현상을 최소화하면서 소자 동작의 신뢰성이 향상된 대용량 메모리 소자를 제작하는데 도움을 줄 수 있다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2315-2316
• /
• 2008

본 논문에서는 Multi-stage 코일건의 동작시간에 따른 성능향상 및 솔레노이드의 최적화에 대해 연구하였다. 동일한 저항값을 가진 솔레노이드에 자기차폐효과를 적용시켜 최적화된 솔레노이드 형상을 설계하였으며, 이 솔레노이드 3개를 이용해 Multi-stage 코일건을 제작하였다. 제작된 Multi-stage 코일건의 성능 향상을 위해 본 논문에서는 AVR(ATmaga128)을 이용하여 각 솔레노이드의 동작시간을 제어하고 Multi-stage 코일건의 각 동작시간에 따라 발사체의 속도가 증가한다는 것을 측정값을 통해 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1897-1899
• /
• 2003

본 논문에서는 Barrier coupler type UHF 센서의 현장적용 및 감도개선을 위해 외부잡음의 차폐방법과 광대역 안테나를 Barrier coupler type UHF센서에 적용시켜 센서의 성능을 개선시켰다. GIS 내부에서 발생하는 부분방전 신호를 검출하기 위하여 UHF대역(0.3${\sim}$3GHz)의 전자파 신호의 검출이 가능한 광대역 Rectangular 패치 안테나를 barrier coupler type UHF 센서에 적응 설계하였으며, Rectangular patch antenna를 배열(array) 했을 때의 특성들을 비교하였다. 이론 위해 상용화된 EM Simulator를 이용하여 센서의 방향성과 감도 특성을 검토하여 설계 및 제작하였다. 개발된 센서의 실제 특성을 분석하기 위해서 network analyzer로 센서의 특성을 분석하였고, 실규모의 GIS 챔버를 사용하여 다양한 결함에 대한 센서의 감도와 특성을 평가하였다. 본 연구의 결과로서 제작된 barrier coupler type UHF센서가 가스절연기기(GIS)의 부 부방전 신호를 검출할수 있음을 입증하였고, 광대역 외장형센서의 경우 patch antenna의 구조에 크게 상관하지 않음을 알 수 있었다. 향후에는 GIS 내장형 센서와 비교 연구론 통해 barrier coupler type 센서의 성능을 개선하고자 한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.25-28
• /
• 2016

본 논문에서는 실시간 얼굴 추적을 위하여 기존의 CamShift 알고리즘의 단점을 보완한 새로운 CamShift 알고리즘을 제안한다. 배경 내 추적 객체와 색상이 유사한 객체가 존재할 경우 기존 CamShift 알고리즘은 불안정한 추적을 보여준다. 이러한 문제점을 화소 단위로 거리정보를 획득할 수 있는 Kinect 의 깊이 정보와 HSV 색공간 기반의 피부색 후보영역을 추출하는 Skin Detection 알고리즘을 이용하여 색상분포만 이용하는 기존의 CamShift 의 단점을 보완한다. 또한 추적하던 객체가 사라지거나 가려짐이 발생할 경우에도 다시 추적할 수 있는 특징점 기반의 매칭 알고리즘을 통하여 차폐영역에 강인한 특성을 가지게 한다. 이러한 향상된 CamShift 알고리즘을 사람의 얼굴 추적에 적용함으로써 다양한 분야에 활용 가능한 강인한 얼굴추적 알고리즘을 제안하고자 한다. 실험결과 제안하는 알고리즘은 기존의 추적 알고리즘인 TLD 보다 월등히 빠른 처리속도와 더 우수한 추적성능을 보여주었고, CamShift 보다 조금 느리지만 기존의 CamShift 가 가지고 있는 문제점들을 해결하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.477-480
• /
• 2005

In this paper, the concept of sustainability was applied to mechanical design and manufacturing of mobile-phone case. A new evaluation method to find products' good and weak point for sustainability was developed. Two mobile phones were evaluated using the evaluation tool. As a result, electro-magnetic (EM) wave was considered as a harmful factor of the products, and improved front panel was made using nano particles that absorb EM waves. The EM shielding tests revealed that silver nano powders absorbed EM while MWCNT had no effect.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.15-18
• /
• 2010

Main component of radiography barrier aprons is lead. To manufacture a lead-free barrier sheath, barium sulfate and organic iodine-based chemicals should be mixed with rubber. Barrier capacity was tested in the medical field. To improve adaptation of rubber with the mixture, raw materials went through milling, agitation, and extruding processes. Three sheaths were manufactured with 30%, 80%, and 120% sulfate barium, respectively. This study found 10% lower barrier capacity of lead-free barrier than the traditional lead-containing rubber sheath. Problems, however, were confronted during the agitation and extruding processes. Mixing with rubber was a technically demanding job. Inconsistent depth, problems with thermal processing and dissipation were encountered as well.