• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.310.2-310
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.384.2-384
• /
• 2002

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.05a
• /
• pp.339-340
• /
• 2011

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.7-7
• /
• 2019

중요한 사회기반시설물 중 하나인 상수관망시스템은 대부분의 시설물이 지중에 매설되어있기 때문에 지진에 취약하고 복구에 어려움이 크며, 지진 발생 시 대규모 피해로 이어질 우려가 있다. 따라서 상수관망시스템에 대한 지진피해를 최소화하고 재해로부터 신속하게 복구하기 위한 적절한 복구전략을 마련할 필요가 있다. 상수관로에 발생하는 지진피해는 크게 파손과 누수로 구분되며, 대구경 관로가 파손될 경우 대규모 단수 및 피해가 우려되므로 신속한 복구전략이 마련되어야한다. 일반적으로 파손 관로의 복구는 먼저 피해 관로 인근의 제수밸브의 차폐를 통해 통수를 차단한 후 교체 작업을 진행하는 것이 일반적이며, 해당 과정에서 밸브 차폐에 의한 단수구역의 발생이 불가피하다. 이러한 단수구역 발생은 해당 지역의 용수공급능력 저하로 이어지며, 단수구역의 범위 및 단수용량의 규모는 제수밸브의 위치 및 개수에 따라 결정된다. 본 연구에서는 기개발된 상수관망 지진피해복구 시뮬레이션 모형(Choi et al., 2018)을 개선하여 지진피해복구 시 시스템 내 제수밸브의 설치 위치와 개수에 따라 발생되는 단수구역과 단수상황이 상수관로의 용수공급능력(Serviceability)에 미치는 영향을 분석하였다. 개선된 모형은 피해복구에 따른 용수공급능력을 정량적으로 산정할 수 있으며, 피해 관로의 복구 시 제수밸브 차폐에 의해 발생되는 단수구역을 탐색한 후, 수리해석 모의에 적용함으로써 현실적인 용수공급 상황을 모의할 수 있도록 개선되었다. 또한, EPANET3.0의 Full-PDA(Pressure driven analysis)를 이용함으로써 지진과 같은 비정상상황(다수관의 파손에 따른 압력저하)에서 좀 더 현실적인 수리해석이 가능하도록 개선되었다. 본 연구에서는 해당모형을 실제관망에 적용하여 제수밸브 설치개수 및 위치가 지진피해복구에 미치는 영향을 비교 분석하였으며, 또한 효율적인 지진피해복구 방안을 제시하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.424-432
• /
• 2018

We herein analyze and study the shielding effectiveness characteristic of an open conveyor-belt-type microwave dryer that is widely used in industry. In particular, the electromagnetic wave leakage problem of the open-type conveyor belt dryer using a general-purpose 2.45-GHz magnetron was improved by applying the corrugated rectangular waveguide. We conducted the electromagnetic simulation of the optimal shielding effectiveness characteristic with regard to the proposed waveguide structure to analyze the attenuation characteristics of the corrugated rectangular waveguide. To verify the shielding effectiveness characteristic of the fabricated corrugated rectangular waveguide by IEEE standard 299, we achieved the shielding effectiveness of more than 30 dB in the practical microwave dryer with the proposed corrugated rectangular waveguide.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.596-603
• /
• 2018

The traffic congestion is frequently occurring due to increasing demand for vehicles and development of subcenter in roads of domestic-downtown. The design of a Great depth underground double-deck tunnel planned for construction as a solution however it's mainly for a compact-car. Its low height and small section cause causalities when fire occurs. From this study, the delay system for fire smoke diffusion is developed to minimize the occurrence of casualties when fire occurs in the Great depth underground double-deck tunnel and the CFD(Computational Fluid Dynamics) is used to find the optimal installation interval and the blockage ratio to maximize the system effects. The study analyzed the shorter the installation interval of the system, the higher the smoke delay effect but the efficiency-change tends to be slight above a certain distance and the larger the blockage ratio, the higher the effect but the efficiency-difference is slight according to installation interval.

• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.295-300
• /
• 2015

There are various type of particle accelerators such as Kyoungju 100-MeV proton beam accelerator in Korea. And Korea plans to build large particle accelerator such as heavy ion accelerator and 4th generation light source facility. The accelerated high energy particles of these facility produce 2nd neutron after nuclear reaction with target materials. And then these 2nd neutron activate structural materials and surrounding environment. Accordingly, it is important to consider the activation and shielding calculation on design of facility for safety operation. In this study, we tried to calculate and compare the neutron flux from the interaction $^{la}150$ beam with target material(Cu) according to thickness of iron and concrete shielding material by MCNPX 2.7 with nuclear library JENDL/HE 07and la150. To verify the properties of nuclear library, we compared computational results with experimental value. These results can be used for dose evaluation technology in planning of the shielding of large particle accelerator.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2012

Radioactive waste transport package was developed to transport eight drums of low and intermediate level waste(LILW) in accordance with the IAEA and domestic related regulations. The package is classified with industrial package IP-2. IP-2 package is required to undergo a free drop test and a stacking test. After free drop and stacking tests, it should prevent the loss or dispersal of radioactive contents, and loss of shielding integrity which would result in more than 20 % increase in the radiation level at any external surface of the package. The objective of this study is to establish the safety test method and procedure for stacking test and to prove the structural integrities of the IP-2 package. Stacking test and analysis were performed with a compressive load equal to five times the weight of the package for a period of 24 hours using a full scale model. Strains and displacements were measured at the corner fitting of the package during the stacking test. The measured strains and displacements were compared with the analysis results, and there were good agreements. It is very difficult to measure the deflection at the container base, so the maximum deflection of the container base was calculated by the analysis method. The maximum displacement at the corner fitting and deflection at the container base were less than their allowable values. Dimensions of the test model, thickness of shielding material and bolt torque were measured before and after the stacking test. Throughout the stacking test, it was found that there were no loss or dispersal of radioactive contents and no loss of shielding integrity. Thus, the package was shown to comply with the requirements to maintain structural integrity under the stacking condition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.30-40
• /
• 2013

In this study the method based on flux linkage in cell was introduced in calculation of eddy currents by cell method. According to this method eddy current distribution and the loss can be evaluated and since the shielding effectiveness by flux cancelation of eddy current can be analyzed, this method is applicable to design of conductive shield. And also the formula of shielding factor were so deduced as to be applicable to finite-width infinite-length shielding sheets and infinite-length underground cable shield. These formula are adaptable to magnetic materials as well as conductive materials. As the results of calculation in model shields are follows. In case of finite-width infinite-length shielding sheet, shielding effectiveness increases with increasing of conductivity. In case of infinite-length underground cable shield, the effectiveness become higher with increasing of permeability. Especially the effectiveness is very high in materials with both high conductivity and permeability in underground cable shield.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.29-38
• /
• 1994

The denser and higher speed telecommunication systems get, the more electromagnetic waves and more heat they throw off. With power predictions lastly for the upcoming systems, they need the enforced method to optimize the technologies between shielding effectiveness and cooling characteristics. In the present study, the shielding effectiveness and cooling characteristics for en- closures with multiapertures considered as fundamental solution in telecommunication systems are performed both of experimentally and unmerically. The shielding effectiveness measured from ex- perimental work is compared with both of the analytical data for flat plates with multi-apertures and the cooling characteristics by the numerical solution. As results, the most significant influence on the shielding effectiveness of enclosures is determined by the porosities of apertures, and it is found that shielding effectiveness and cooling capabilities are significant varied, reciprocally,at which porosity is more than 80%.