• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.361.1-361.1
• /
• 2003

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.576-577
• /
• 2000

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.931-936
• /
• 2020

This study was conducted to observe the changes in radiation exposure dose and image quality of pediatric patients according to the presence and size of the gonadal shield when using the AEC system. X-ray equipment was used to measure the radiation exposure dose in the abdominal and gonads of the pediatric phantom when no shielding body was used and when three different sizes of shielding body were used, and SNR and CNR were measured through the obtained images. As a result of the study, the radiation exposure dose to the gonads decreased in proportion to the size of the radiation shield, but the radiation exposure dose to the abdomen was rather increased, and the image quality did not change. It is recommended to use a shield with a size optimized for the age, weight, and body size of the pediatric patient so as not to be overexposed by the increased radiation due to the radiation shield due to the use of the AEC System. For this purpose, information about the pediatric patient with the nurse It is believed that exchange is necessary.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.234-243
• /
• 2023

The electromagnetic pulse(EMP) is a general term for high-output electromagnetic waves, and is classified into EMP generated from nuclear weapons, non-nuclear EMP, and EMP generated by natural phenomena. Electromagnetic pulses are means that can cause fatal damage to all electronic devices with electromagnetic elements, such as communication devices, mobile phones, computers, TVs, and means of transportation. In this study, the electromagnetic pulse(EMP) shielding effectiveness evaluation of paints according to the type and amount of carbon material was conducted to develop EMP shielding inorganic paint using carbon materials. In order to analyze the improvement of compatibility and dispersibility between materials, experiments were conducted two times with about 27 types of mixture proportions, and the electromagnetic pulse shielding effectiveness was evaluated by the electrical resistance measurement method. As a result of applying the EMP shielding paint developed through this study to shielding concrete, it was confirmed that the shielding performance was improved from about 25 dB to a maximum of 40 dB.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.18-23
• /
• 2022

This paper examines the electromagnetic shielding structure of ultra-high frequency (UHF) RF modules used in aircraft. Advances in electrical and electronic technologies have increased the need for electronic equipment in aircraft. High-frequency wireless devices have become integrated circuits in the form of UHF integrated circuits to support a wide range of frequencies and miniaturisation. To ensure the functionality and performance of these integrated devices in aviation, shielding is necessary to prevent unexpected electromagnetic interference, which could be detrimental to aircraft safety. A shield structure was designed to protect the RF chipset from malfunctioning, and the shielding effectiveness was improved through the application of various geometric shapes.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.73-76
• /
• 2003

전력선이나 전기철도에 인접한 통신용 동(copper)케이블에는 전력선이나 전기철도에 흐르는 높은 전류/전압에 의해 유도전압이 발생한다. 2004년 1월부터 고속전철의 상업 시운전이 시작되고 4월부터는 상업운행이 개시됨에 따라 유도전압으로부터 통신품질을 보호하는 것은 매우 중요하다. 본 고에서는 고속전철에 의해 발생하는 유도현상과 유도대책장치인 차폐케이블 차폐선, INT 등의 기술을 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.217-217
• /
• 1999

축전 결합 차폐막(Faraday shield)이 없는 평판형 유도 결합 플라즈마 장치에서 방전 모드 전이 중출력 결합 변화동안 전자 가열에 대한 연구가 행하여졌다. 전자 에너지 분포 함수(EEDF)의 전개가 RF 보상탐침을 사용, 교류 충첩 방법으로 측정된다. RF 출력에 따른 전자 밀도, 유효 전자 온도 및 특히, 플라즈마 전위의 동향이 제시된다. bi-Maxwellian EEDF를 가진 플라즈마에서 플라즈마 전위가 고 에너지 전자 그룹에 의해 결정됨을 보이고, 플라즈마 전위와 EEDF 상호 관계가 논의된다. 실험 결과로부터 RF출력에 따른 플라즈마 전위의 변화가 전자 가열에 있어 축전 출력 결합의 상대적인 기여의 변화를 반영함을 알 수 있다.

• Journal of the Korean Vacuum Society
• /
• v.3 no.4
• /
• pp.457-465
• /
• 1994

유도결합 플라즈마의 해석식으로 양극성 확산, 정상상태를 가정한 확산식, 열평형식과 변위전류 를 무시한 맥스웰 식을 사용하였다. 해석기법으로는 유한 차분법과 적분법을 축대칭 2차원(R, Z)모델에 적용하였다. 유도 결합 플라즈마장치의 RF 전력, 압력, 석영창 두께, 차폐부 높이에 따른 전자온도, 전자 밀도, 등가 정항 등가 인덕턴스 효율 결합계수 K, Q-factor의 변화를 구하였다. 특히 등가정항은 진공챔 버, 차폐부 및 코일의 손실저항을 고려하여 구하였다.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.114-119
• /
• 2002

A immobilizing device that is essential for correct lung and lens shielding with homogenous dose distribution in fractionated total body irradiation was developed and it's efficiency was evaluated. The main frame was made of stainless steel bar (5 cm in diameter) to withstand up to 230 cm in height and 100 kg in weight to prevent any injury even in unconsciousness condition. The saddle was designed to adjust the body weight and hight of standing patients. Chest and back supporter were made of 1 cm acryl which could fix the lung block and cassette holder. Leather and sponge pedding were used for head rest to keep patients comfortable. The device was strongly fixed by specially designed bolts on the bottom panel which was made of 1 cm stainless steel and 10 cm thick wooden board. Precise manipulation ($\pm$2 mm) was possible by upper two pulleys and side handles. Average four minutes twenty five seconds were needed for exact setting in fractionated TBI. No significant difference of lung block location on repeated verification films was confirmed and relatively homogeneous dose distribution was measured in rando phantom experiments and patient treatments ($\pm$5%). This immobilizing device was very efficient to keep correct position of patients, which is essential for better result and less complication in fractionated TBI.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.493-501
• /
• 1999

The vibration modes of resilient mounting system and foundation structure which support diesel engine/generator set and acoustic enclosure walls play an important role in the vibration transmission process. So, it is necessary to perform vibration mode analysis of resilient mounting system and foundation structure. For some reasons, if the vibration modal analysis of resilient mounting system and foundation structure of acoustic enclosure could be simultaneously done by finite element method, it would be very efficient approach. In this paper, vibration modal analysis method using finite element method for multi stage mounting system having n d.o.f model was proposed. Vibration analysis of single and double stage resilient mounting system was performed to verify the validity of the proposed method. Also frequency response results were compared in case of rigid foundation model and finite element foundation model which was compared with experimental modal analysis results.