• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1735-1740
• /
• 2000

The aim of this study is to analyze the sound insulation performance of windows depending on the sound source types and to propose the noise control method in the apartment house. The regions where apartment houses are constructed are varied in the dominant noise sources such as aircraft noise, railway noise and road traffic noise. For the experiment, nine noise sources including pink noise were selected and recorded, which was used in the experiment by reproducing. As a result of this study, the sound insulation performance of window was found that when the frequency contents of the noise were high level in all frequency bands the difference of sound insulation performance was negligible, but when the frequency contents were low level at particular frequency band the difference of sound insulation performance was shown very differently.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1741-1746
• /
• 2000

Recently the impact sound insulation performance is regarded as one of the most important factor in determining the quality of apartment house. So many studies were carried out to improve these performance and to propose an appropriate evaluation method and standard of floor impact sound insulation for apartment house by psycho-acoustic method in the laboratory. This study was carried out the field psycho-acoustic test to find a correlation between physically measured values and psychological response in apartment house, and the results will be used to establish the appropriate evaluation method and standard of floor impact sound insulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2012

The aluminum extruded panel used for a high speed train shows the largest contribution to sound insulation performance of the train body. However, comparing with the flat panel having the same weight, the transmission loss falls sharply in the local resonance frequency band. Such fall of transmission loss can be improved by increasing the damping of local resonance. This study examines the charging effect of an urethane foam on the aluminum extruded panel of a high speed train. We charged the urethane foam with different mass density and in different way in the core part of the extruded panel. We measure the transmission loss and compare the sound insulation performance according to the density and charging method. Finally, Improvement effect of the transmission loss is compared and analysed in aspect of weight increment.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.73-76
• /
• 2003

This paper is contents about method to measure interception performance of shock noise of floor slab of apartment house to be simple. In the case of interception performance of light floor impact sound level, according to measurement method, grade of sound insulation performance showed greatly differently. But, in the case of interception performance of heavy floor impact sound level, it was similar result in all measurement method. Therefore, use of simple method of measurement was examined by possible fact in case of interception performance of heavy floor impact sound level.

• 방재기술
• /
• 통권42호
• /
• pp.17-25
• /
• 2007

쾌적하고 명료성이 높은 교실내의 음향환경은 학생들의 학업 성취도 및 교사의 언어전달 이해 향상을 이룩할 수 있는 중요한 사항이다. 이러한 우수한 교육환경을 위해서는 우선 우리나라의 교실 음향 실태 파악과 함께 교육시설의 음향상태 및 소음에 의한 학업 성취도, 심리적, 사회적 영향에 대한 정량적 조사가 이루어 져야 한다. 국내 교육시설의 음향 실태 파악을 통해 교육시설에서의 음향 및 소음 기준을 수립하여 교육시설내의 음환경 개선을 추진해야 한다. 교실 음향개선을 합리적으로 평가할 수 있는 지표로서 잔향시간과 배경소음이 가장 중요한 요소로 알려져 있다. 교실의 우수한 음환경을 위해 적절한 잔향시간은 $0.4\sim0.6$초, 배경소음은 NC-$25\sim30$수준이 확보되어야 하는 것으로 조사되었다. 또한 교사의 음성레벨과 배경소음과의 비(S/N비)는 최소 10 dB이상 되어야 강의 내용 전달이 가능하며, 각종 기계설비에서 발생되는 소음 및 진동은 저소음 기기 선정을 통해 최소화하여야 한다. 인접 실에서 발생되는 소음을 충분히 차단하기 위해서는 차음성능 우수한 구조의 벽계로 개선되어야 하며, 기밀성이 높은 출입문사용과 적절한 출입구 배치를 통해 인접한 교실로의 소음 전달을 최소화 할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.864-869
• /
• 2003

KS F 2808 was revised in 2000 and KS F 2862-1 was newly established in 2001. Thus Related Korean Industrial Standard such as KS F 4724, KS F 4735, KS F 4736 should be revised according to KS F 2808 and KS F 28612-1. This study aims to elicit the new rating numbers such as R$\sub$w/, R$\sub$w/＋C, R$\sub$w/＋C$\sub$tr/, L$\sub$m/ defined in KS F 2862-1 instead of exiting rating number; transmission loss of 500Hz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.932-937
• /
• 2003

In apartment buildings, floor-impact sound has bean regarded as the major source which induces complaints from residents. It is mainly due to the use of light-weight structures. The vibration produced by impact on one part of an apartment building would travel as far as the other parts of structure with a little alleviation. As a result, the impact sound from upstairs has been regarded as a main source of noise causing discontentment among accupants. This study was carried out to measure the floor-impact sound levels and evaluate the insulation performance of floor-impact sound for seven apartment buildings. The floor-impact sound levels were measured for seventeen On-dol floor structures and various factors which influence the floor-impact sound were analyzed.

• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.33-39
• /
• 2003

Interior parts of a vehicle are getting important to reduce interior noise. Therefore, prior analysis of cabin noise related with interior parts are necessary at first design stage. Recently, Statistical Energy Analysis(SEA) has been suggested as a possible way for high frequency range noise analysis of interior parts. The validity of noise analysis with SEA to interior parts has been preyed by comparing with experimental result, and the developed method with SEA has been applied in finding optimized interior parts package.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.457-462
• /
• 2011

The sidewall of the HEMU-400x consists of two parts. One is the multi-layered structure including aluminium extruded panel and the other is the double glazed window. When the train runs in a tunnel, the equivalent sound insulation performance of the side wall significantly influences the internal noise levels. In aspect of the sound insulation strategy, it is important to make two parts have similar performance. In this study, the intensity sound transmission loss (ITL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance of the two parts in respect of the weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy is investigated to reduce the interior noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.719-724
• /
• 2013

In the case of newly developed stud which has more performance of sound transmission loss, it is expected that sound would transmit through runner than stud. so we developed construction method of runner and stud. As a result, sound transmission loss is improved about 2 dB by using this method. But this construction method could be applied to only newly developed stud. In addition, sound leak of wall joint is about 2 dB, and it could be improved by using rubber gasket at joint.