• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.39-45
• /
• 2012

Three-dimensional integrated circuit(3D IC) technology has become increasingly important due to the demand for high system performance and functionality. In this work, BOE and HF wet etching of Cu line surfaces after CMP were conducted for Cu-Cu pattern direct bonding. Step height of Cu and $SiO_2$ as well as Cu dishing after Cu CMP were analyzed by the 3D-Profiler. Step height increased and Cu dishing decreased with increasing BOE and HF wet etching times. XPS analysis of Cu surface revealed that Cu surface oxide layer was partially removed by BOE and HF wet etching treatment. BOE treatment showed not only the effective $SiO_2$ etching but also reduced dishing and Cu surface oxide rather than HF treatment, which can be used as an meaningful process data for reliable Cu-Cu pattern bonding characteristics.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.183-186
• /
• 2000

본 논문에서는 인식이 진행되는 동안 탐색 공간을 효과적으로 줄임으로써 음성인식의 고속화를 달성할 수 있는 새로운 프레임 단위 적응 프루닝 알고리즘을 제안하고 실험을 통하여 그 유효성을 확인하였다. 이것은 앞 프레임과 뒤 프레임 사이의 최대확률은 높은 상관성을 가지므로 프루닝 문턱치를 앞 프레임의 최대 확률로부터 효과적으로 구할 수 있다는 사실에 근거를 두고있다. 이 방법에서는 앞 프레임의 최대 우도 확률과 후보 확률들의 조합으로 현재 프레임의 프루닝 문턱치를 갱신함으로써 현재 프레임의 문턱치를 인식 과정 중에 얻을 수 있기 때문에, 인식 태스크가 바뀌어도 문턱치를 구하기 위한 사전 실험을 수행할 필요가 없게 된다. 또한, 프레임 단위로 적응적으로 얻어진 문턱치는 다른 환경 하에서도 인식 속도의 향상을 가져올 수 있게 된다. 제안된 알고리즘의 유효성을 확인하여 위하여 한국어 주소 인식 시스템에 적용하였다. 본 시스템은 48개의 유사음소단위(PLUs)를 인식의 기본단위로 하고, 적응알고리즘으로는 최대사후확률추정법((MAP: Maximum A Posteriori Probability Estimation)을, 인식 알고리즘으로는 OPDP(One Pass Dynamic Programming)법을 이용하였다 남성화자 3인이 25개의 연결 주소명을 대상으로 인식 실험을 수행한 결과, 제안된 프레임단위 적응프루닝 문턱치를 적용한 경우를 기존의 고정 프루닝 문턱치와 가변 프루닝 문턱치를 적용한 경우와 비교하였을 때 인식률의 변화 없이 탐색공간이 상대적으로 각각 $14.4\%와 $9.14\%가 감소되어 제안된 프레임 단위 적응 프루닝 알고리즘의 유효성을 확인할 수 있었다. 시,공간적 분포 특성이 구체적으로 규명되면 보다 정확한 음장변화 추정이 이뤄져야 할 것으로 보인다. 또한 내부파와 음파의 상대적인 진행 방향에 따라 음장변화가 크게 다를 것이 예상되므로 이를 규명하기 위해서는 궁극적으로 3차원적인 음장분포 연구가 필요하다. 음향센서를 해저면에 매설할 경우 수충의 수온변화와 센서 주변의 수온변화 사이에는 어느 정도의 시간지연이 존재하게 되므로 이에 대한 영향을 규명하는 것도 센서의 성능예측을 위해서 필요하리라 사료된다.가지는 심부 가스의 개발 성공률을 증가시키기 위하여 심부 가스가 존재하는 지역의 지질학적 부존 환경 및 조성상의 특성과 생산시 소요되는 생산비용을 심도에 따라 분석하고 생산에 수반되는 기술적 문제점들을 정리하였으며 마지막으로 향후 요구되는 연구 분야들을 제시하였다. 또한 참고로 현재 심부 가스의 경우 미국이 연구 개발 측면에서 가장 활발한 활동을 전개하고 있으며 그 결과 다수의 신뢰성 있는 자료들을 확보하고 있으므로 본 논문은 USGS와 Gas Research Institute(GRI)에서 제시한 자료에 근거하였다.ऀĀ耀Ā삱?⨀؀Ā Ā?⨀ጀĀ耀Ā?돀ꢘ?⨀硩?⨀ႎ?⨀?⨀넆돐쁖잖⨀쁖잖⨀／ࠐ?⨀焆덐瀆倆Āⶇ퍟ⶇ퍟ĀĀĀĀ磀鲕좗?⨀肤?⨀⁅Ⴅ?⨀쀃잖⨀䣙熸ጁ↏?⨀

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.189-195
• /
• 2011

The design of new bioactive scaffolds offering physiologic environment for tissue formation is an important frontier in biomaterials research. In this study, we performed compressive strength, water-uptake ability, and SEM analysis for physical property assessment of 3-D silk/PLGA scaffold, and investigated the adhesion, proliferation, phenotype maintenance, and inflammatory responses of RAW 264.7 and NIH/3T3 for cell compatibility. Scaffolds were prepared by the solvent casting/salt leaching method and their compressive strength and water-uptake ability were excellent at 20 wt% silk content. Result of cell compatibility assay showed that inflammatory responses distinctly decreased, and initial adhesion and proliferation were maximized at 20 wt% silk content. In conclusion, we suggest that silk/PLGA scaffolds may be useful to tissue engineering applications.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.2
• /
• pp.125-132
• /
• 2016

Objectives : The management of disaster should be immediate and sustainable. Further, it is hard to predict where the disaster will occur, using pre-exists governmental and non-governmental organizations are important. In this study, we tried to investigate the associated activities of organizations performed in Ansan city, in Sewol ferry accident. Methods : A total 121 workers in 25 organizations were surveyd about organizations which they worked with, kind of works performed, frequency of meetings, satisfaction in activities and factors associated with dissatisfaction in usual state and in Sewol ferry accident state, respectively. The differences between those two situations were analyzed using paired t-test for continuous variables and Chi-square test or McNemar test for categorical variables. Results : The total number of linkage of institutions were decreased(from n=397 to n=251) and the mean scores of rating satisfaction were significantly lower in most of organizations in disaster state. The rigid policy in performance evaluation was more likely associated with dissatisfaction in disaster state than usual state(p=0.045). Conclusions : For effective linkage of institutions, preparedness, such as understanding the capability of organizations in the communities and developing the protocol for associated activities, is important. The unnecessary and effortful performance evaluation should be sublated.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.27-40
• /
• 2023

A pile is a structural element that is used to transfer external loads from superstructures and has been widely utilized in construction fields all over the world. The method of installing a pile into the ground should be selected based on geotechnical conditions, location, site status, environmental factors, and construction costs, among others. It can be divided into two types: direct hammering and preboring. The direct hammering method installs a pile into the bearing layer, such as rock, using a few types of hammer, generating a considerable amount of pile driving-induced vibration. The vibration from pile driving influences adjacent structures and the ground; therefore, quantitatively investigating the effects of vibration is inevitably required. In this study, two-dimensional dynamic numerical modeling and analysis are performed using the finite difference method to investigate the influence on the adjacent slope, including temporary supporting system. Time-dependent loading induced by pile driving is estimated and used in the numerical analysis. Consequently, large surface displacement is estimated due to surface waves and less wave deflection, and refraction at the surface. The total displacement decreases with the increase of the distance from the source. However, lateral displacement at the top of the slope shows a larger value than vertical displacement, and the overall displacement tends to be concentrated near the face of the slope.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.210-216
• /
• 2007

A study was conducted to find mechanism and spray characteristics of a mini-sprinkler with downward spray to develop a new design type to be able to prevent drop water. The experiments were executed in a plastic greenhouse to minimize the effect of the wind. Data was collected at five different operation pressures and at 4 different raiser heights. Spray characteristics of the sprinkler such as effective radius, effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. In order to analyze the mechanism and packing supporter of sprinkler, the numerical simulation using ABAQUS was performed. The optimum pressure for preventing drop water was determined.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.13-26
• /
• 1994

The present study was focused on investigation of proper processing conditions to develop physicochemical properties of extrudates using sea mustard and corn by single extruder. Response surface analysis was used to evaluate effects of extrusion variables on the quality of the extrudates. Physicochemical dependence variables of sea mustard extrudates with corn grits show a significance correlation of within $5\%$. Among the various dependence variables, the expansion ratio showed a high correlation with bulk density, break strength, water solubility index and yellowness. Bulk density correlated closely with water solubility index; break strength with water absorption index and lightness, and water absorption index with lightness. Water solubility index and lightness showed a significance correlation with yellowness of within $0.5\%$. Three dimensional graphic analysis on response surface regression was conducted with each of the dependent variables which revealed statistically significant relationship to independent variables: $15{\sim}21\%$ moisture content, $10{\sim}30\%$ sea mustard content and $95{\sim}115^{\circ}C$ die temperature. Expansion ratio decreased with increasing moisture and sea mustard content. It showed the highest value at $18\%$ moisture content, $10\%$ sea mustard content and $95^{\circ}C$ die temperature. and the lowest value was at $21\%$ moisture content, $30\%$ sea mustard content and $105^{\circ}C$ die temperature. Bulk density was highest at $21\%$ moisture content, $30\%$ sea mustard content and $105^{\circ}C$ die temperature. On the other hand, it was lowest at $18\%$ moisture content, $10\%$ sea mustard content and $95^{\circ}C$ die temperature. Break strength was highest at $18\%$ moisture content, $10\%$ sea mustard content and $115^{\circ}C$ die temperature, but lowest at $21\%$ moisture content, $30\%$ sea mustard content and $105^{\circ}C$ die temperature. Water solubility index increased in the range of $43.9{\sim}54.8\%$ as the moisture content increased.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.2 s.42
• /
• pp.222-230
• /
• 1993

Industrial glues, known as 'Bonds' in Korea, contain many kinds of organic solvents, and glue sniffing of youths became one of the social problems in Korea. Mixed exposures to solvents by glue sniffing may induce chronic toxicities different from those by exposures to solvents of single component. To test effects of the glue sniffing on weight gain or central nervous system, two groups of 20 male Sprague-Dawley rats were exposed to air(control group) or vapors of the glues to narcotic status(exposed group), and weight check, tail flick test, hot plate test, rotarod treadmill test were done on the 14th,24th, 36th, 45th, 53rd, 86th, 102nd, 117th, 134th and 151st days after the first exposure. On the 188th day, their brains were excised and examined by a pathologist. Weight gain, controlled against time change, showed significant difference between the groups, but response times in tail flick test, hot plate tests, and rotarod treadmill test didn't. In pathological examination with blind method, no macroscopic or microscopic differences were found between the two groups. These results suggests that organic lesion in central nervous system may not ensue glue sniffing, but, before firm conclusion, more studies in various exposure conditions should be followed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.13-17
• /
• 2010

Purpose: Partial volume effect (PVE) is the phenomenon to lower the accuracy of image due to low estimate, which is to occur from PET/CT 3D image acquisition. The more resolution is declined and the lesion is small, the more it causes a big error. So that it can influence the test result. Studied the optimum image reconstruction method by using variation of parameter, which can influence the PVE. Materials and Methods: It acquires the image in each size spheres which is injected $^{18}F$-FDG to hot site and background in the ratio 4:1 for 10 minutes by using NEMA 2001 IEC phantom in GE Discovey STE 16. The iterative reconstruction is used and gives variety to iteration 2-50 times, subset number 1-56. The analysis's fixed region of interest in detail part of image and compute % difference and signal to noise ratio (SNR) using $SUV_{max}$. Results: It's measured that $SUV_{max}$ of 10 mm spheres, which is changed subset number to 2, 5, 8, 20, 56 in fixed iteration to times, SNR is indicated 0.19, 0.30, 0.40, 0.48, 0.45. As well as each sphere's of total SNR is measured 2.73, 3.38, 3.64, 3.63, 3.38. Conclusion: In iteration 6th to 20th, it indicates similar value in % difference and SNR ($3.47{\pm}0.09$). Over 20th, it increases the phenomenon, which is placed low value on $SUV_{max}$ through the influence of noise. In addition, the identical iteration, it indicates that SNR is high value in 8th to 20th in variation of subset number. Therefore, to reduce partial volume effect of small lesion, it can be declined the partial volume effect in iteration 6 times, subset number 8~20 times, considering reconstruction time.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.