• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1473-1479
• /
• 2011

In this paper, speed control of IPMSM drives for the next generation domestic high speed railway system using multilevel inverter is presented. Multilevel inverter is suitable for the high-voltage high-capacity motor drive system because noise and switching frequency of power semiconductor devices is reduced. For the speed control of IPMSM using multilevel inverter, maximum torque control is applied in a constant torque region, and field weakening control is applied in a constant power region. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2684-2690
• /
• 2011

The bogie is one of the most important components in a railway vehicle. So a lot of study has been carried out for safety and reliability of the bogie frame in experimental and simulation. In this paper, Presents an experimental study on health monitoring of next generation high-speed train bogie frame. The ultimate objective of this paper is to estimate the sensor located for health monitoring of bogie. The result from this study might be used essential data in order to construct the next generation high speed train bogie frame health monitoring.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3133-3141
• /
• 2011

The next generation domestic high speed railway system is a power distributed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor drive system due to their advantages in efficiency, noise reduction and maintenance. The next-generation high speed train is composed of 2 converter units, 4 inverter units, and 4 Traction Motor units. Each motor is connected to the inverter directly. In this paper, the effect of IPMSM parameter variations to the system operation characteristics of the multi inverter drive high speed train system are investigated. The parallel connected inverter input-output characteristics are analyzed to the parameter mismatches of IPMSM using the 1C1M control simulator based on Matlab/Simulink.

• Journal of the Korean Society for Railway
• /
• v.4 no.4
• /
• pp.147-154
• /
• 2001

A high-speed rail system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, information, communication, civil technology etc. The Systems Engineering, as a methodology for engineering and management of today's ever-growing complex system, must be applied to development of such systems. This paper presents systems engineering framework model to have to be applied to the systems engineering technology development task for the korean next-generation high-speed railway systems in progress and demonstrates data models and schema for computer-aided systems engineering software, RDD-100, for use in its development and management.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1262-1270
• /
• 2010

The next generation domestic high speed railway system is a power dispersed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor driven system due to their advantages in efficiency, noise reduction and maintenance. In this paper, the maximum torque control approach is presented for the IPMSM drives with reluctance torque. The applied control method uses maximum torque control per ampere technique. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1079-1082
• /
• 2008

The HEMU-400X project starts last year. It is important first of all that describe correctly system requirement until configuration of system, design, manufacturing, installation and test verification so that the complicated high-speed electric multiple unit is to run safety and reliable and to achieve target performance and function properly. The system requirement assist the system designer to comprehensive the performance and function of system in basic design. This paper proposes the development methodology of system requirement for HEMU-400X.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1005-1009
• /
• 2005

The On Board Computer System (ORCS) used for rolling stocks is one of the core equipments in trains, which deals with collecting real-time data of a train to display and record the train's statuses, control the train, and support the driver and maintenance function. Resides, due to high reliability and high speed communication required lately for various electronics including signal1ing devices, train protection system, and multimedia, the necessity of a more robust train communication network is on the lise. This study aims at understanding the technological trend of the current train communication network in order to rapidly cope with the tendency above and providing fundamental data for designing a more advanced communication network for high-speed trains hereafter.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.547-556
• /
• 2009

In this paper, we tried to find the engineering feasibility of the component functions of the seven selected application technologies which are going to be installed on the next generation high speed train as the IT and smart sensor application technologies. The component functions of the seven applications, including the "Emergency or reminder notification", were identified and analyzed. In order to justify the feasibility of applications development, effect analysis and sufficiency analysis were performed. In effect analysis, how each function has an effect on safety, convenience, and efficiency of the passengers and attendants was evaluated. In sufficiency analysis, the importance and implementability of each function as a component was evaluated. The feasibility analysis was focused on the technical aspects of the functions. The following work will be the settlement of the final applications that are going to be designed and implemented. This will be done by studying the strategic feasibility in relation to the service or business of the high speed train.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.623-628
• /
• 2009

There is an increasing demand for efficient high power/weight auxiliary power supplies for use on high speed traction application. Many new conversion techniques have been proposed to reduce the voltage and current stress of switching components, and the switching losses in the traditional pulse width modulation(PWM) converter. Especially, the phase shift full bridge zero voltage switching PWM techniques are thought most desirable for many applications because this topology permits all switching devices to operate under zero voltage switching(ZVS) by using circuit parasitic components such as leakage inductance of high frequency transformer and power device junction capacitance. The proposed topology is found to have higher efficiency than conventional soft-switching converter. Also it is easily applicable to phase shift full bridge converter by applying an energy recovery snubber consisted of fast recovery diodes and capacitors.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.395-400
• /
• 2009

The HEMU-400X project starts at 2007. It is important first of all that describing correctly system requirement during configuration of system, design, manufacturing, installation and test verification so that the complicated high-speed electric multiple unit is to run safety and reliable and to achieve target performance and function properly. The system requirement assist the system designer to understand the performance and function of system in basic design. For this process, system engineer have to manage the system requirement. This paper proposes the management contents of system requirement such as change management, requirement traceability, etc, for HEMU-400X.