• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.949-958
• /
• 2018

A voice recognition control system is a system for controlling a peripheral device by recognizing a voice. Recently, a voice recognition control system have been applied not only to smart devices but also to various environments ranging from IoT(: Internet of Things), robots, and vehicles. In such a voice recognition control system, the recognition rate is lowered due to the ambient noise in addition to the voice of the user. In this paper, we propose a dual channel acoustic beamforming hardware architecture for MEMS(: Microelectromechanical Systems) microphones to eliminate ambient noise in addition to user's voice. And the proposed hardware architecture is designed as ASIC(: Application-Specific Integrated Circuit) using TowerJazz $0.18{\mu}m$ CMOS(: Complementary Metal-Oxide Semiconductor) technology. The designed dual channel acoustic beamforming ASIC has a die size of $48mm^2$, and the directivity index of the user's voice were measured to be 4.233㏈.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.313-320
• /
• 2018

The importance of sensors on a self-driving vehicle has rising since it act as eyes for the vehicle. Lidar sensors based on laser technology tend to yield better image quality with more laser channels, thus, it has higher detection accuracy for obstacles, pedistrians, terrain, and other vechicles. However, incorporating more laser channels results higher unit price more than ten times, and this is a major drawback for using high channel lidar sensors on a vehicle for actual consumer market. To come up with this drawback, we propose a method of integrating multiple low channel, low cost lidar sensors acting as one high channel sensor. The result uses four 16 channels lidar sensors with small form factor acting as one bulky 64 channels sensor, which in turn, improves vehicles cosmetic aspects and helps widespread of using the lidar technology for the market.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.359-370
• /
• 2007

Lane tracking and obstacle avoidance are considered two of the key technologies on an unmanned ground vehicle system. In this paper, we propose a method of lane tracking and obstacle avoidance, which can be expressed as vehicle control, modeling, and sensor experiments. First, obstacle avoidance consists of two parts: a longitudinal control system for acceleration and deceleration and a lateral control system for steering control. Each system is used for unmanned ground vehicle control, which notes the vehicle's location, recognizes obstacles surrounding it, and makes a decision how fast to proceed according to circumstances. During the operation, the control strategy of the vehicle can detect obstacle and perform obstacle avoidance on the road, which involves vehicle velocity. Second, we explain a method of lane tracking by means of a vision system, which consists of two parts: First, vehicle control is included in the road model through lateral and longitudinal control. Second, the image processing method deals with the lane tracking method, the image processing algorithm, and the filtering method. Finally, in this paper, we propose a method for vehicle control, modeling, lane tracking, and obstacle avoidance, which are confirmed through vehicles tests.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.65-74
• /
• 2024

In recent years, image processing technology has played a critical role in the field of autonomous driving. Among them, image recognition technology is essential for the safety and performance of autonomous vehicles. Therefore, this paper aims to develop a hybrid image recognition system to enhance the safety and performance of autonomous vehicles. In this paper, various image recognition technologies are utilized to construct a system that recognizes and tracks objects in the vehicle's surroundings. Machine learning and deep learning algorithms are employed for this purpose, and objects are identified and classified in real-time through image processing and analysis. Furthermore, this study aims to fuse image processing technology with vehicle control systems to improve the safety and performance of autonomous vehicles. To achieve this, the identified object's information is transmitted to the vehicle control system to enable appropriate autonomous driving responses. The developed hybrid image recognition system in this paper is expected to significantly improve the safety and performance of autonomous vehicles. This is expected to accelerate the commercialization of autonomous vehicles.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.430-443
• /
• 2013

The recognition of current position and road surrounding of car is very important to driver for safe driving. This paper presents the recognition technique of the road traveling environment using position information hiding and viewpoint transform that monitors the information of road furniture and signature and notifies them to driver. The proposed scheme generates the road images into which the position information are hided, from car camera and GPS module and provides the road information to driver through the viewpoint transformation and the road signature detection. The driving tests with camera and GPS module verified that the position information hiding takes about 66.5ms per frame, the detection rate of road signature is about 95.83%, and the road signature detection takes about 227.45ms per frame. Therefore, we know that the proposed scheme can recognize the road traveling environment on the road video with 15 frame rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1453-1461
• /
• 2022

The accuracy of peripheral object recognition algorithms using 3D data sensors such as LiDAR in autonomous vehicles has been increasing through many studies, but this requires high performance hardware and complex structures. This object recognition algorithm acts as a large load on the main processor of an autonomous vehicle that requires performing and managing many processors while driving. To reduce this load and simultaneously exploit the advantages of 3D sensor data, we propose 2D data-based recognition using the ROI generated by extracting physical properties from 3D sensor data. In the environment where the brightness value was reduced by 50% in the basic image, it showed 5.3% higher accuracy and 28.57% lower performance time than the existing 2D-based model. Instead of having a 2.46 percent lower accuracy than the 3D-based model in the base image, it has a 6.25 percent reduction in performance time.

• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.508-508
• /
• 1998

위험물 차량사고는 일반차량의 교통사고시 발생하는 인명피해, 재산피해, 교통지체 외에 부가적으로 환경적 영향에 의한 엄청난 인명 및 재산손실을 유발시킬 수 있다. 따라서 이러한 위험물차량사고를 예방하고 피해를 최소로 줄이기 위해서는 위험물수송경로의 신중하고 체계적인 결정이 필수적이라 할 수 있다. 외국의 경우, 위험물의 방출이 미치는 환경적 영향에 대한 인식이 확대되면서 위험물 수송시 응급처리에 관한 연구, 위험물 수송에 따른 위험도 평가에 관한 연구, 위험물 수송시 고려해야할 여러 조건에 관한 연구, 위험물 수송경로 설정에 관한 연구 등이 진행되고 있다. 반면에 우리 나라는 위험물차량관리와 사고처리에 대해 실시간적인 관리를 목표로 하는 국가차원의 계획을 수립하고는 있지만, 현재 이와 관련된 연구는 거의 없는 실정이다. 앞으로 산업발달에 따른 위험물수송량의 증가와 환경의식의 변화에 따라 위험물수송 및 사고처리 등에 관한 연구가 필요할 것이다. 따라서, 본 연구는 위험물차량의 운송경로를 결정할 때 고려해야 할 여러 가지의 기준 및 목표에 따라 위험물수송경로를 설정하는 모형을 제시함으로써 위험물수송에 수반되는 위험을 최소화하면서 위험물차량의 통행시간, 거리, 비용 등을 최적화하여 위험물수송의 안전 및 운영효율성을 향상시키고자 한다. 먼저, 위험물 수송경로의 기준지표로 사용될 위험도를 산정하기 위해 링크 주변노출인구, 밀도 등을 변수로 하는 모형식을 제안하고, 두 번째로 산정된 위험도를 기반으로 최적경로를 결정하는 알고리즘을 제안하였다. 마지막으로 가상 네트웍에 본 연구에서 제안된 모형을 적용하고 현재 일반적으로 사용되는 최단경로와 비교·분석하였다.것은 운송거리와 운송비용이 각각 주요한 변수라는 것이다. 모형의 타당성을 검증하기 위해서는 logilikelihood 값을 구하여 $\rho$^2분석을 시행하였다. 여기서는 각 품목별로 $\rho$^2값이 약 0.15~0.3의 비교적 높은 수치를 보여주고 있으므로 모형의 설명력이 어느 정도 있다는 것이 아울러 증명이 되었다. 상관관계에 대한 분석에서는 영업용 차량간의 상관관계가 높게 나타났으며, 이는 곧 영업용 화물차량을 적재중량별로 구분하는 것이 별 의미가 없음을 의미한다. 다시 말하면 자가용 차량을 보유하고 있지 않은 회사는 다른 운송전문업체에 화물운송을 의뢰하게 되므로 출하중량에 따라 화물차량을 구분하는 것에 대해서 그다지 큰 고려를 하지 않는 것으로 해석할 수가 있다.적합함을 재확인함. 6. 혼잡초기를 제외한 혼잡기간 중 대기행렬길이는 밀도데이터 없이도 혼잡 상류부의 도착교통량과 병목지점 본선통과교통량만을 이용하여 추정이 가능함. 7. 이상에 연구한 결과를 토대로, 고속도로 대기행렬길이를 산정할 수 있는 기초적인 도형을 제시함.벌레를 대상으로 처리한 Phenthoate EC가 96.38%의 방제가로 약효가 가장 우수하였고 3월중순 및 4월중순 월동후 암컷을 대상으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.392-397
• /
• 2014

Recently, there are many researches on active safety system of intelligent vehicle. To reduce the probability of collision caused by driver's inattention and mistakes, the active safety system gives warning or controls the vehicle toward avoiding collision. For the purpose, it is necessary to recognize and analyze circumstances around. In this paper, we will treat the problem about collision risk assessment. In general, it is difficult to calculate the collision risk before it happens. To consider the uncertainty of the situation, Monte Carlo simulation can be employed. However it takes long computation time and is not suitable for practice. In this paper, we apply neural networks to solve this problem. It efficiently computes the unseen data by training the results of Monte Carlo simulation. Furthermore, we propose the features affects the performance of the assessment. The proposed algorithm is verified by applications in various crash scenarios.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.175-181
• /
• 2009

Intelligent Transportation Systems(ITS) enables road users to enhance efficiency of their trips in a variety of traffic conditions. As a significant part of ITS, information communication technology among vehicles and between vehicles and infrastructure has been being developed to upgrade current traffic data collection technology through location-based traffic surveillance systems. A wider and detailed range of traffic data can be acquired with ease by the technology. However, its performance level falls with environmental impediments such as large vehicles, buildings, harsh weather, which often bring about wireless communication failure. For imputation of vehicle trajectory data discontinued by the failure, several potential existing methods were reviewed and a new method to complement them was devised. AIMSUN API(Application Programming Interface) software was utilized to simulate vehicle trajectories data and missing vehicle trajectories data was randomly generated for the verification of the method. The method was proven to yield more accurate and reliable traffic data than the existing ones.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1307-1312
• /
• 2023

In this paper, we propose a hybrid camera system that combines cameras with different focal lengths and LiDAR (Light Detection and Ranging) sensors to address the core components of autonomous driving perception technology, which include object recognition and distance measurement. We extract objects within the scene and generate precise location and distance information for these objects using the proposed hybrid camera system. Initially, we employ the YOLO7 algorithm, widely utilized in the field of autonomous driving due to its advantages of fast computation, high accuracy, and real-time processing, for object recognition within the scene. Subsequently, we use multi-focal cameras to create depth maps to generate object positions and distance information. To enhance distance accuracy, we integrate the 3D distance information obtained from LiDAR sensors with the generated depth maps. In this paper, we introduce not only an autonomous vehicle platform capable of more accurately perceiving its surroundings during operation based on the proposed hybrid camera system, but also provide precise 3D spatial location and distance information. We anticipate that this will improve the safety and efficiency of autonomous vehicles.