• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.427-430
• /
• 2024

교통체계서비스는 안전한 교통 환경을 구축하는 것을 목표로 하여 차량, 도로, 기반 시설의 정보를 수집 및 처리하여 안전 교통정보를 제공한다. 교통체계서비스가 수집하는 차량 운행정보는 교통 안전 정보 외에도 다른 분야에서도 활용될 수 있으며 특히 다른 데이터와 결합하는 것으로 다양한 결과를 도출할 수 있어 연구, 통계 작성 등에 필요한 자료이다. 그러나 차량의 운행정보는 운전자의 개인정보를 포함하고 있어 운행정보 활용 시 가명화 및 가명결합이 필수적이다. 본 논문에서는 가명화된 운행정보를 가명결합하는데 발생하는 문제점을 설명하고 이러한 문제를 해결한 가명결합 방안을 연구하였다. 그 결과 교통체계서비스가 수집한 운행정보를 다른 기관의 데이터와 결합하여 활용할 수 있게 하여 개인정보를 보호하면서 데이터의 유용성을 활용하는데 기여할 것으로 예상한다.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.116-128
• /
• 2017

Traffic accidents can be defined as a physical collision event of vehicles occurred instantaneously when drivers do not perceive the surrounding vehicles and roadway environments properly. Therefore, detecting the high potential events that cause traffic accidents with monitoring the interactions among the surroundings continuously by driver is the prerequisite for prevention the traffic accidents. For the analysis, basic data were collected to analyze interactions using a test vehicle which is equipped the GPS(Global Positioning System)-IMU(Inertial Measurement Unit), camera, radar and RiDAR. From the collected data, highway geometric information and the surrounding traffic situation were analyzed and then safety evaluation algorithm for driving vehicle was developed. In order to detect a dangerous event of interaction with surrounding vehicles, locations and speed data of surrounding vehicles acquired from the radar sensor were used. Using the collected data, the tangent and curve section were divided and the driving safety evaluation algorithm which is considered the highway geometric characteristic were developed. This study also proposed an algorithm that can assess the possibility of collision against surrounding vehicles considering the characteristics of geometric road structure. The methodology proposed in this study is expected to be utilized in the fields of autonomous vehicles in the future since this methodology can assess the driving safety using collectible data from vehicle's sensors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1044-1050
• /
• 2021

After the occurrence of several passenger ship accidents in Korea, various systems are being developed for passenger ship safety management. A total of 162 passenger ships operate along the coast of Korea, of which 105 (65 %) are car-ferries with open vehicle decks. The car-ferry has a navigation pattern that passes through 2 to 4 islands. Safety inspections at the departure point(home port) are carried out by the crew, the operation supervisor of the operation management office, and the maritime safety supervisor. In some cases, self-inspections are carried out for safety inspections at layovers. As with any system, there are institutional and practical limitations. To this end, this study was conducted to suggest a method of detecting a vehicle using image processing and linking it to the calculations for ship stability. For vehicle detection, a method using a difference image and one using machine learning were used. However, a limitation was observed in these methods that the vehicle could not be identified due to strong background lighting from the pier and the ship in the cases where the camera was backlit such as during sunset or at night. It appears necessary to secure sufficient image data and upgrade the program for stable image processing.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.540-545
• /
• 2010

As the urban railroad durability period law has revised on march 19, 2009, the life cycle of urban railroad cars has lengthened to 40 years for the longest period. It seems to be attributed to the development of railroad car making technique along with their durability being longer thanks to the quality improvement of their materials and parts. As the stability of urban railroad cars is directly linked to the safety of passengers, safety should be considered first, and more precise examination is necessary for endurance extension. Hereupon, the rolling stocks with their durability near expiration should get precise diagnosis following the revised "RDG for urban railroad cars" This study aims to suggest a diagnosis method for the institute and the urban railroad operating body which enforce the revised diagnosis, through the case of Busan transportation corporation which firstly started the revised diagnosis after the durability related law has been revised.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.133-141
• /
• 2014

Recently, various services are provided by using WAVE protocol for communication among neighboring vehicles. And in order to operate stable system, the gateway for interconnecting in and out vehicle networks is required. In this paper, we propose gateway interconnecting WAVE and CAN protocol. The proposed gateway based on OSEK OS consists of a communication layer, a message translator layer and a message management layer. In the communication layer, WAVE communication part and CAN communication part are designed to communicate with WAVE and CAN. And in the message management layer, message management layer functions to store the received messages and check errors with the message. Based on these functions, experiment was conducted to analyze performance of the gateway with two scenarios such as transmitting periodically BSM as a message structure for safety services in vehicle-to-vehicle communications and responding to road side equipments requiring in-vehicle information. As a result of test, we verify our gateway performance by analyzing measured time in test scenarios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.165-171
• /
• 2013

WAVE(Wireless Access in Vehicular Environments) is a representative V2V communication protocol and its standards of MAC and PHY parts except for security were published. In order to control traffic flow and ensure driver's safety using V2V communication, various projects are conducting. In particular, safety application has been researched. Therefore, in this paper, we designed the safety application algorithm, which informs a driver of the dangerous status when driver tries to turn left in an intersection and we also implemented the algorithm. Proposed algorithm configures a model for a host vehicle and a vehicle coming in opposite lane and in case that there is collision hazard it provides warning message to driver by using HMI. In order to evaluate the proposed algorithm's performance, we configured the test bed using test vehicles and we tested the algorithm on proving ground with the composed test scenarios. As test results, our system showed excellent performance. If the infrastructures for V2I communications are constructed, we will optimize our system more precisely and stably.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.287-292
• /
• 2000

최근에 각종 SOC사업이 본격화되면서 고속도로망 및 도시교통망 확충이 가속화되어 장대 터널이 급증하고 있을 뿐만 아니라 차량의 급속한 증가로 차량배기가스에 의한 터널내부 환경의 악화가 문제시되고 있다. 특히 도로터널은 반밀폐 공간으로 터널내에서의 사고는 인명피해와 막대한 재산 피해로 이어질 수 있으므로 안전운전을 위한 제반설비 및 대책이 필요하며 안전운행을 위한 가시거리 확보 및 쾌적한 환경에 대한 요구가 대두되고 있다. 따라서 터널에서 이와 같은 요구를 만족하기 위해서 기계환기설비가 투입되고 있으며 이에 대한 최적화 설계에 대한 필요성이 높아지고 있다.(중략)

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.163-164
• /
• 2020

교통 신호등 자동 제어시스템 기술은 교통 체증 현상을 방지하고 횡단 보도를 건너는 보행자들의 안전을 목적으로 시작되었다. 이는 1가구당 2차량에 가까운 보급률을 보이고 있는 현대 사회에 불가피하게 생기는 문제인데 본 연구에서는 이러한 문제로 인한 교통 신호등 자동 제어시스템 기술을 적용하고자 한다. 사거리에서 운전을 하다 보면 차량이 많이 지나가는 차선이 있는 반면 비교적 차량이 많이 지나가지 않는 차선들을 볼 수 있다. 이런 경우 차량이 많은 차선은 신호시간 내 차량이 모두 지나가지 못해서 교통체증이 발생하게 된다. 교통 체증을 최소화하기 위해서 압력 센서를 설치하여 차량이 많이 정체 되고 있는 차선에 신호의 시간을 증가시켜주고 차량이 많이 없는 차선은 기본 신호의 시간을 주어 차량이 많이 있는 차선의 차들의 교통 체증을 해소시켜 준다. 그리고 차량이 많이 지고 스마트폰의 보급이 많아지다 보니 횡단 보도에서 스마트폰을 보고있다 횡단 보도에서 사고를 당하는 경우 증가하고 있다. 이러한 보행자들을 위해 횡단 보도의 신호가 초록불이 되었을 때 간단한 음악이 나오고 발 밑에 횡단 보도 신호등과 같은 색깔이 나오게 하는 LED를 설치한다. 이렇게 하여 초록불이 들어왔다는 것을 보행자들에 인식시켜 보행자들의 안전을 지킬 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.624-629
• /
• 2016

A brake lever in a basic railway brake system is an important safety device that delivers braking force from the brake cylinder to the brake pad. The safety guidelines for designing rolling stock only qualitatively describe that the brake lever should have sufficient strength. Each train has a different type of brake lever. One brake lever that was designed with a factor of safety of 1.27 has failed, so the material was changed to increase the strength. Therefore, the stress distribution and weak points of the lever were identified by theoretical analysis. and structural analysis. Different brake lever designs were examined for KTX high-speed trains, which have a split-type structure, as well as for electric locomotives, which use an electric multiple unit (EMU) with a unity-type structure. A fracture test was also done to look at the relationship between the vertical stress and the bending stress during braking. The results were used to find a safety factor to apply to each train and suggest quantitative minimum guidelines. We also looked at changing the unity-type EMU brake lever to the split type under the same conditions and analyzed how much the design change affected the factor of safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7329-7334
• /
• 2015

This is to analyze of driver behavioral and the accident characteristics in rollover. The study period was January 2011 to May 2014 and the subject of study was 102 person who were drivers visited the emergency room. Research tool includes a damage information of the vehicle, accident mechanism, damage to the patient clinical information with the injury data from the ROAD Traffic Authority. For data analysis, SPSS 18.0 was used for t-test, ANOVA and Chi-square test. Injury Severity Score average score according to the vehicle type is 6.00 points in the smaller vehicle, at high vehicle 11.78 points, from the other vehicle that showed 14.70 points. Significant differences between the three groups did not show (P=.267). Men did not use a seat belt significantly compared to women(P=.007). Vehicle type and weather, this was no correlation with whether or not use the seat belt(P=.755, P=.793). But showed a tendency to smaller size vehicles drivers do not use a seat belt, the weather could see a little more inclined to use a seat belt rather than a sunny day. Finally, in rollover accidents as in other types of accident it was confirmed that the seat belt has a great influence on the damage.