• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.55-63
• /
• 2019

Proximity sensors and rearview cameras for automobile safety are common, but many accidents are still occurring. Using the All Around View and object recognition algorithm to show the front, back, left, right and bottom of the vehicle, the sensor detects the presence of a living body when the vehicle starts or parks, and displays the outside of the vehicle on the screen. In addition, the object recognition algorithm is used to visualize the object by expressing the position of the object. In this way, we propose a strong safety system that can prevent human accidents caused by the vehicle by sensing, screen, and expression.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.939-944
• /
• 2014

Traffic accidents caused by the attention dispersion are increasing and the behavior of the attention dispersion affects the front-observing rate, road keeping ability, and reaction time for a dangerous situation. Many drivers listen to a radio broadcast and they have to change the frequency for continuously listening a radio broadcast of the specific broadcasting station in case of crossing a boundary of the particular area. In this situation, the possibility of a car accident increases, because the attention dispersion of a driver might be occurred. Especially, the risk of a car accident caused by changing the frequency of a radio is more serious in the highway, due to the high speed of a vehicle. In order to reduce the risk of a car accident caused by handling a radio during driving car, in this paper, we propose an automatic frequency conversion algorithm for vehicle radio, which saves normal system frequencies of primary broadcasting stations in a database and determines new frequency of the changed area using the location information obtained from a navigation system in a boundary of the specific area. After determining new frequency, the proposed algorithm selects a frequency with better receiving rate comparing signal-to-noise ratios (SNRs) of two signals corresponding previous and new frequencies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.27-36
• /
• 2018

In this paper, we design and implement a real time IoT messaging system that can collect location information of moving vehicles and pedestrians in real time using MQTT protocol and provides location based information service in administrative area. We implemented MQTT based IoT device for vehicle location information collection and communication and MQTT based smartphone application for pedestrian location information service. IoT clients can send messages to the server in administrative units by using the MQTT Topic which is equal to administrative names. The SLIMS (Seoul Location based IoT Messaging System) implemented in this study is able to analyze the real time traffic volume of pedestrians and vehicles by tracking clients. It also can deliver messages to clients based on coordinate range. SLIMS can be used as a real-time location-based information service for large-scale IoT devices such as real-time flow population and vehicle traffic analysis and location-based message delivery.

• Electronics and Telecommunications Trends
• /
• v.26 no.6
• /
• pp.47-57
• /
• 2011

DARPA 무인차 대회 우승과 구글 자율주행 자동차로 유명한 세바스찬 스런 스탠포드대 교수는 18살이 되던 해에 가장 친한 친구를 교통사고로 잃었고, 그것을 계기로 계기로 무인차 개발에 나서게 되었다고 한다. 현재 대부분의 교통사고는 운전자의 과실로 발생하며, 기계의 보조나 자동제어가 있다면 대부분 예방할 수 있다. 또한 자동으로 차선을 유지하고 차간거리를 유지하게 해준다면 도로의 교통 수용량을 2배 내지 3배로 높일 수 있으며, 도로에서 보내는 시간과 연료를 절약할 수 있다. 현재 지능형 자동차 및 도로 인프라 기술은 이러한 운전자의 안전성, 편의성, 교통 효율성, 에너지 절약을 달성하기 위한 자동차와 인프라 간의 협력형 ITS(C-ITS: cooperative ITS) 방향으로 기술개발이 이루어지고 있으며, 본 고에서는 이와 관련된 차량 자동유도 요소 기술 및 동향에 대해서 살펴본다.

• TTA Journal
• /
• s.127
• /
• pp.28-29
• /
• 2010

2009년 우리나라의 자동차 등록 대수는 1,700만 대를 넘어섰고, 곧 2,000만 대를 넘어설 것이라고 한다. 1911년 고종황제의 어차로 국내에 겨우 2대의 차량이 도입 된지 100년 만에 실로 엄청나게 많은 자동차가 등장하게 된 것이다. 그뿐만 아니라 황제가 타던 차에서 이제는 출근이나 쇼핑은 물론이고, 가족과 함께 즐거운 여행을 떠나는 데도 없어서는 안 될 생활필수품이 되었다. 하지만 이렇게 편리함을 주는 자동차가 때론 운전 미숙으로 인해 가족들에게 씻을 수 없는 큰 상처를 남기기도 한다. 그렇다면 자동차 속에는 어떤 과학적인 원리가 숨어있는 것일까?

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.266-271
• /
• 2007

In mobile channel environments, the effect of the multi-path fading reduces the performance of the mobile communication severely. Previous studies on the effect of the multi-path fading show that, only the channel between fixed base stations and mobile terminals are considered. However, the future mobile communication service such as telematics may use the communication between moving mobile terminals, so called mobile ad-hoc communication, the studies on the channel is required for such situations. In this paper we have measured the mobile channel and analyzed the fading characteristics when using the linear array antennas. In the data measurements, we sent the QPSK modulated signal with carrier frequency of 2GHz band and received the signal using the array antennas equipped on moving vehicles. We have analyzed the fading characteristics and the effects of the fading reduction using the CDF of fading depth using data collected from two moving vehicles. The simulation results show that the beamforming technique adds 6 or 7dB to the fading margin than that of the selection diversity depending on channel environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1449-1454
• /
• 2012

Received signal strength indicator (RSSI) represents the strength of the received signal at the front end of analog-to-digital convertor (ADC) input. RSSI value can be used for deciding the status of channel at the receiver. In this paper, the usage of RSSI in handover is studied using the practical measurement data. We first measure RSSI in 5.9GHz frequency band which is commonly used in wireless access in vehicular environments (WAVE) system. i.e., vehicular communications. Then, to implement a fast handover, the usability of RSSI data is analyzed based on the measured data. We also apply handover in practical highway environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.14-27
• /
• 2009

Collection of invaluable real-time traffic data becomes available under ubiquitous transportation sensor networks (UTSN). Various research efforts have been made to utilize such useful data for deriving more accurate and reliable traffic information. This study presented a novel concept of decentralized traffic information and method to process traffic data which are obtained from inter-vehicle communications under the UTSN. In addition, an experimental evaluation to investigate the feasibility of the proposed method using probe vehicle data. Predictive travel times were estimated and evaluated for the feasibility investigation. Technical issues were derived and discussed to fully implement the proposed system. The outcomes of this study would be used as a guideline in designing better next-generation traffic information systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.711-717
• /
• 2017

The railway is a public transportation system that provides large-scale passenger transportation and service, whose reliability and safety is the top priority. The wiring of railway vehicles is classified into train control lines (train lines) and communication lines. The train lines are used for input / output signals related to vehicle driving and safety functions, and the communication lines are used for the input / output signals for passenger services such as broadcasting. In order to measure the reliability of railway vehicles, a train line is applied to the input / output interface of the control signals between the electric control devices in the vehicle, and there are many electromechanical devices such as relays and contactors for the control logic. In fact, since the vehicle control circuit is composed of several thousand contacts, it is difficult to check for errors such as contact failure, and it is impossible to check the real-time status, so a lot of manpower and time is required for regular maintenance. Therefore, we analyze the current state of the train line design of the electric equipment used for driving and services in domestic railway cars and propose three wiring reduction methods to improve it. Based on the analysis of domestic electric vehicles, it was confirmed that the wiring reduction effect is 35% or more.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.435-442
• /
• 2015

In this paper, we propose a tracking and recognition of pedestrian/vehicle for intelligent multi-visual surveillance system. The intelligent multi-visual surveillance system consists of several fixed cameras and one calibrated PTZ camera, which automatically tracks and recognizes the detected moving objects. The fixed wide-angle cameras are used to monitor large open areas, but the moving objects on the images are too small to view in detail. But, the PTZ camera is capable of increasing the monitoring area and enhancing the image quality by tracking and zooming in on a target. The proposed system is able to determine whether the detected moving objects are pedestrian/vehicle or not using the SVM. In order to reduce the tracking error, an improved camera calibration algorithm between the fixed cameras and the PTZ camera is proposed. Various experimental results show the effectiveness of the proposed system.