• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.341-346
• /
• 2011

In the development of high-speed trains, ride comfort is an important factor that determines the quality of the train. In this study, the ride comforts of high-speed trains with rigid and flexible car bodies were evaluated. The rail irregularity is used as an exciting source of the car-body bounce motion. The complex extruded structures of the car-body are modeled as shell structures using the calculated equivalent stiffness of the flexible model. The numerical results show that the ride of the rigid-body model improves as the speed increases, which is unreasonable. In contrast, the relationship between ride comfort and speed in the case of flexible-body model is reasonable. Thus, it is confirmed that the flexibility of the car body needs to be taken into consideration while fabricating a high-speed train.

• Archives of design research
• /
• v.17 no.3
• /
• pp.123-132
• /
• 2004

This paper shows a study on the "Korean High Speed Train Design" method, its design process and the result in the form of aerodynamic optimal exterior design development of a prototype test train(HSR 350${\times}$). It was developed from 1996 until 2002, six years long in R '||'&'||' D project titled "Development of High Speed Railway Technology" The end result of the project is a prototype test train, which has two power cars, two motorized trailers and three trailers, had been tested successfully in the year 2003 to the highest speed limit 380km/h on high speed line. The improved conceptual design work of a new commercial train and next generation's train is also performed for future needs.uture needs.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.177-182
• /
• 2016

In order that the track vehicle utilized on the purpose of heavy industry and military affair may endure the vehicle body with heavy weight, the link surrounding the mobile wheel is affected with the great force by the load transferred at the vehicle body. This happened force gives rise to a decline in the durability throughout the track. In this paper, the models with the shapes of track pads in common use are designed and the model at which the wear of track pad and the damage of link can be decreased effectively is contrived. Also, by applying this study result to the design of track vehicle, it can contribute to the safe design for damage prevention and durability improvement. It is possible to be grafted onto the convergence technique at the designed factor of pad shape and show the esthetic sense.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.404-411
• /
• 2010

Authors conducted a deduction and characteristic calculation of the some parameters using a magnetic equivalent circuit method to verify a basic design result of a rotary-typed small-scaled linear induction motor for a railway transit. In a LIM, it is possible to express the parameters of the magnetic equivalent circuit into a function of the shape of the secondary aluminium plate and the airgap between the LIM primary core and the secondary aluminium plate. It means that the LIM properties can be changed considerably by the shape of the secondary aluminium plate and the airgap between the LIM primary core and the secondary aluminium plate. So, authors analyzed a tendency of changes of the magnetic equivalent circuit parameters and the LIM characteristics by changing of the airgap, the thickness of the secondary aluminium plate and the overhang length and shape of a rotary-typed small-scaled LIM, and accomplished a basic research to develop a real-scaled LIM for a railway transit.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.591-598
• /
• 2011

When a vehicle passes through a turnout, it is necessary for the changes in lateral force to be minimized to ensure the safe running of the vehicle. Therefore, the analysis of the interaction between the vehicle and the turnout is crucial for estimating the lateral force and the derailment coefficient on the turnout. In this paper, the effect of the variation of section shape on the running safety of a vehicle was investigated by changing the shape of the point part and the crossing part. The tongue rail length of the point part and nose rail height of the crossing part of an F10/F12 turnout were changed, and the running safety of the vehicle was analyzed.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.28-28
• /
• 2009

최근 전세계적으로 유가 상승 및 배기가스 배출 저감과 관련된 각종 환경규제에 대응하기 위하여 선진 자동차회사들은 $CO_2$ 배출 저감 기술과 기존 내연기관 차량의 연비향상을 위해 엔진성능 개선, 구동시스템의 최적화, 차량 경량화, 공기저항 감소 등에 초점을 맞춰 차량의 연비향상과 배기가스 규제에 대응하고 있다. 특히, 자동차 중량의 30%를 차지하는 차체의 경량화는 엔진효율을 높여 자동차의 성능향상을 극대화시키고, 그로 인해 연비향상을 도모할 수 있으므로 환경오염 방지와 연료절감에 가장 적합하고 효과적인 방법이다. 이에 기존의 강재에 비해 비중이 낮으면서 유사한 강도와 내식성이 뛰어난 알루미늄 합금의 차체 적용에 대한 연구가 진행되고 있다. 본 연구에서는 자동차 Door에 알루미늄 합금(Al 5052)의 적용 가능성을 판단하기 위해 반응표면분석법(Response surface methodology)을 이용하여 저입열 Pulse MIG 용접 공정변수를 최적화하였다. 첫째, 저입열 Pulse MIG 용접에서 용접 공정 변수(용접전압, 용접속도, Gap)의 변화가 비드 형상에 미치는 영향에 대해 평가하였다. 요인분석법을 이용하여 용접 공정 변수와 비드 형상 변수와의 주효과와 교호작용효과를 분석하였고, 이를 통해 비드 형상 변수에 영향을 크게 미치는 용접 공정변수를 선별하여 다중회귀분석을 통해 용접 공정 변수 변화에 따른 비드형상 예측 회귀모델을 제안하였다. 둘째, 자동차 Door 생산 현장에서 박판 알루미늄 합금 겹치기 용접 이음부의 0~1 mm 갭 발생에 대해 강건한 용접조건을 제시하기 위해 반응표면법(Response surface methodology)을 이용하여 저입열 Pulse MIG 용접 공정 변수를 최적화하였고, 그 적용 가능성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2938-2940
• /
• 1999

도로 색과 대비를 이루는 계수선을 도로위에 그려놓고 영상을 이용하여 통과 차량을 계수 하는 영상기반 교통량 측정 기술을 제안하였다. 기존의 컴퓨터 영상을 이용한 차량 계수 장치들은 대부분 도로와 차량의 gray level차이를 이용하는 방식이기 때문에 도로와 차량간의 구분이 쉽지 않고 그림자와 차량의 식별도 어려우며 조명에 의해 착오를 일으키기 쉬운 문제를 안고 있었다. 제안한 계수방법은 도로 위에 도로 색과 뚜렷한 대비를 이루는 띠를 도로를 가로질러 그려 놓은 다음 이를 통과하는 차량에 의해 띠의 형상이 절단되는지의 여부를 판단하여 차량을 계수 하는 방법이다. 이를 위해서 계수선을 포함하는 영상의 창을 설치하고 수시로 에지를 추출한 후, 에지의 절단 여부를 검사한다. 이때 계수선의 색과 동일한 차량이 통과할 경우에는 계수선의 에지는 절단되어 도로방향으로 연장되게 되며 계수선의 색과 다른 차량인 경우에는 계수선의 에지가 계수선의 내부로 연장되게 된다. 계수선 상에 그림자가 있는 경우에도 도로와 계수선 간의 색상변화가 뚜렷하므로 계수선의 에지 검출에는 영향을 받지 않게 된다. 제안한 알고리즘을 실험실에 설치된 모형도로와 모형 차량들을 이용하여 실험하고 결과를 제시하였다.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.169-174
• /
• 2013

The effect of modifying the shape of a high-performance EMU train on the aerodynamic drag is studied here using Computational Fluid Dynamics(CFD) based on three dimensional Steady-state Navier-Stokes equation and two equation turbulence modeling. FLUENT 12 and Gambit 2.4.6 are employed for a numerical simulation of the aerodynamic drag of a streamlined-shape train as well as a proto type train. The characteristics of the aerodynamic drag of trains in tunnels are analyzed in a comparison with these characteristics in an open space. The contribution of the aerodynamic drag of each case is also investigated to establish principal pertaining to drag reduction for urban trains in tunnels. The aerodynamic drag of a streamlined train was reduced to 9.8% relative to a proto-type train with a blunt nose and a protruding roof facility and underbody shape: the running resistance is expected to be reduced by as much as 4% at a running speed of 80km/h.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.31-40
• /
• 2000

A robust scheme of locating and counting the number of vehicles m urban traffic scenes, a core component of vision-based traffic monitoring systems, is presented The method is based on the evidential reasoning, where vehicle evidences m the background subtraction Image are obtained by a new locally optimum thresholding, and the evidences are merged by three heuristic rules using the geometric constraints The locally optimum thresholding guarantees the separation of bright and dark evidences of vehicles even when the vehicles are overlapped or when the vehicles have similar color to the background Experimental results on diverse traffic scenes show that the detection performance is very robust to the operating conditions such as the camera location and the weather The method may be applied even when vehicle movement is not observed since a static Image IS processed without the use of frame difference.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.171-181
• /
• 2004

This paper developed the theoretical method to predict structural performances and weight reduction rates of a carbody when its materials should be substituted. For the material substitution design of the carbody, the bending, axial and twisting deformations are evaluated under the constant stiffness and strength conditions. For the design of the primary structures such as the center beams, the cross beams and the cantrails, the bending and axial deformations are investigated under the condition of the constant bending stiffness, the constant bending or buckling strength by considering both the material properties and the cross sectional shapes. The developed indices to measure the weight reduction by the material substitution give good informations on the weak and strong points of a carbody design.