• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.54-66
• /
• 2018

In this study, vehicle speeds at acceleration and deceleration lanes of rest areas for drowsy drivers were investigated to analyze effects of acceleration and deceleration lane lengths, grades and curve radius. In addition, we used VISSM to analyze proper lengths of rest area's acceleration and deceleration lanes. Several VISSIM scenarios with different lengths of acceleration and deceleration lane were constructed. Through VISSIM simulation, we collected individual vehicle speed data to analyze speed changes by different lengths of acceleration and deceleration lanes. As a result of the vehicle speed change investigation, grades and curve radii of the rest area affected the speed, most of all lengths of acceleration and deceleration lane showed a great effect on the vehicle speed. In the case of short lengths of acceleration and deceleration lane, speed variation among vehicles was significant. If the deceleration lane length is short, the vehicle enters a state in which the speed is not sufficiently reduced, and if the acceleration lane length is short, the vehicle enters a state in which the speed is not sufficiently accelerated showing high risks of conflicts and accidents. It is recommended that 245m length of deceleration lane and 370m length of acceleration lane should be installed at least to secure safety and manage conflicts relevantly.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.14-27
• /
• 2009

Collection of invaluable real-time traffic data becomes available under ubiquitous transportation sensor networks (UTSN). Various research efforts have been made to utilize such useful data for deriving more accurate and reliable traffic information. This study presented a novel concept of decentralized traffic information and method to process traffic data which are obtained from inter-vehicle communications under the UTSN. In addition, an experimental evaluation to investigate the feasibility of the proposed method using probe vehicle data. Predictive travel times were estimated and evaluated for the feasibility investigation. Technical issues were derived and discussed to fully implement the proposed system. The outcomes of this study would be used as a guideline in designing better next-generation traffic information systems.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.29-44
• /
• 2009

A variety of research efforts, using advanced wireless communication technologies, have been made to develop more reliable traffic information system. This study presents a novel decentralized traffic information system based on vehicle infrastructure integration (VII). A major objective of this study was also to devise a methodology for determining appropriate spacing of roadside equipment (RSE) to fully exploit the benefits of the proposed VII-based traffic information system. Evaluation of travel time estimation accuracy was conducted with various RSE spacings and the market penetration rates of equipped vehicle. A microscopic traffic simulator, VISSIM, was used to obtain individual vehicle travel information for the evaluation. In addition, the ANOVA tests were conducted to draw statistically significant results of simulation analyses in determining the RSE spacing. It is expected that the proposed methodology will be a valuable precursor to implementing capability-enhanced next generation traffic information systems under the forthcoming ubiquitous transportation environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.514-521
• /
• 2021

When calculating an intersection collision speed using a formula, it is very difficult to grasp the degree of deceleration of a vehicle after the collision unless there is road surface trace in the entire section where each vehicle moved from the point of collision to their final positions after the collision. A vehicle's motion trajectory shows an irregular curve after a collision due to the effects of inertia based on the driving characteristics of the vehicle, the eccentric force according to the collision site, and the collision speed. Therefore, it is very important to set the appropriate departure angle after a collision for accurate collision speed analysis. In this study, based on experimental collision data using a computer simulation (PC-Crash), the correlation between an appropriate vehicle departure angle and the post-collision speed was analyzed, and then, a regression analysis model was derived. Through this, we propose a method to calculate collision speed by applying only the vehicle departure angle in some types of collisions for traffic accidents at intersections.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.378-387
• /
• 2007

In this paper, Authors develop and verify the algorithm for enhancing the performance of Unmanned vehicle's Autonomous navigation, and also propose the method of establishing much more precise Navigation locus. Unmanned vehicle has a destination, however orientation is not notified, which make it find the future orientation itself. Extended Kalman Filter make it access to the desirable direction, which coupled with INS and GPS is proposed in this paper. Sliding mode control could overcome the side slip and lateral minor movement of the vehicle. The test result would shows the effectiveness of Extended kalman filter and Slide mode control for the navigation.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.207-214
• /
• 2009

This study proposed an advanced warning information system based on real-time traffic conflict analysis. An algorithm to detect and analyze unsafe traffic events associated with car-following and lane-changes using individual vehicle trajectories was developed. A positive guidance procedure was adopted to provide warning information to alert drivers to hazardous traffic conditions derived from the outcomes of the algorithm. In addition, autoregressive integrated moving average (ARIMA) analyses were conducted to investigate the predictability of warning information for the enhancement of information reliability.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.323-336
• /
• 2015

Estimating the risks on the roadway using surrogate safety measures (SSM) has an advantage in that it focuses on the vehicle trajectory directly involved in conflicts. On the other hand, there is a restriction on estimating the risks of continuous segments due to the limited data collected from a location. To overcome the restriction, this study presents the scheme of acquiring the vehicular trajectory using real time kinematics-differential global positioning system (RTK-DGPS) and develops a methodology which contains the considerations of the problems to calculate the SSM such as time-to-collision (TTC), deceleration rate to avoid collision (DRAC) and acceleration noise (AN). By using the methodology, this study shows a result from an experiment executed in a section where the variation of vehicular movement can be observed from several continuous flow roadway sections near Seoul and Gyeonggi Province in Korea. The result illustrated the risks on the roadway by the SSM metrics in certain situations like merging and diverging, stop-and-go, and weaving. This study would be applied to relate the dangers with characteristics of drivers and roadway sections, and prevenst accidents or conflicts by detecting dangerous roadway sections and drivers' behaviors. This study contributes to improving roadway safety and reducing car-accidents.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1359-1366
• /
• 2010

Recently, many electronic control techniques for vehicles have been developed and applied. One of the technologies can be X-by-wire such as throttle-by-wire, brake-by-wire, steer-by-wire, and etc, in which most of mechanical parts are replaced into electrical wire and actuators. In this study, the effect of throttle-by-wire and brake-by-wire control systems on vehicle velocity control, especially in a school zone, are taken into consideration. The number of accidents reported in school zones is higher than that in other places. The reason for this is that many vehicle drivers do not obey speed limit regulations. Moreover, some of the students are careless while crossing the streets. Therefore, in this study, we attempt to develop a method using throttle-by-wire and brake-by-wire control systems for automatically reducing the vehicle speed such that it will be within the speed limit. First, an engine model and a transmission system model are developed for a specific vehicle model. Second, speed reduction is carried out such that the reduction follows a pre-designed cubic spline trajectory; the trajectory is determined such that rapid deceleration, which causes discomfort to the driver and passengers, can be prevented, for which a fuzzy-PID control algorithm is applied for the trajectory following control. Finally, simulation results are presented to verify the performance of the proposed speed reduction control system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.14-26
• /
• 2009

This study presented a novel method to estimate travel times under incident conditions. Predictive travel time information was defined and evaluated with the proposed method. The proposed method utilized individual vehicle speeds obtained from global positioning systems (GPS) and inter-vehicle communications(IVC) for more reliable real-time travel times. Individual vehicle trajectory data were extracted from microscopic traffic simulations using AIMSUN. Market penetration rates (MPR) and IVC ranges were explored with the accuracy of travel times. Relationship among travel time accuracy, IVC ranges, and MPR were further identified using regression analyses. The outcomes of this study would be useful to derive functional requirements associated with traffic information systems under forthcoming ubiquitous transportation environment

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.63-74
• /
• 2009

One of the effective countermeasures for preventing traffic accidents is to provide traffic safety warning information to drivers. Provision of warning information would lead to safer driving to avoid accident occurrence. This study investigated the effects of in-vehicle warning information on driver's behavior. A variety of warning information contents using text, sound, and pictograms were prepared for the field experiments. Individual vehicle speed and acceleration data, which represent quantitative drivers' behavior in response to in-vehicle warning information, were collected using differential global positioning systems (DGPS). Statistical analyses including ANOVA and Tukey's pairwise comparison were conducted. It is expected that the results could be invaluable for designing more effective warning information.