• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.535-546
• /
• 2010

Recently, the probability of collision accident between vehicles or vessels and infrastructures are increasing at alarming rate. Particularly, collision impact load can be detrimental to sub-structures such as piers and columns. The damaged pier from an impact load of a vehicle or a vessel can lead to member damages, which make the member more vulnerable to impact load due to other accidents which. In extreme case, may cause structural collapse. Therefore, in this study, the vehicle impact load on concrete compression member was considered to assess the quantitative design resistance capacity to improve, the existing design method and to setup the new damage assessment method. The case study was carried out using the LS-DYNA, an explicit finite element analysis program. The parameters for the case study were cross-section variation of pier, impact load angle, permanent axial load and axial load ratio, concrete strength, longitudinal and lateral rebar ratios, and slenderness ratio. Using the analysis results, the performance based resistance capacity evaluation method for impact load using satisfaction curve was developed using Bayesian probabilistic method, which can be applied to reinforced concrete column design for impact loads.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.45-50
• /
• 2011

Due to advances in wireless communications and portable terminals, any-time, any-where, and any-device Internet access is possible. In particular, Internet access in moving vehicles is an emerging and challenging issue. Even though a variety studies have been conduced for vehicular networks, little attention is paid to vehicular Wi-Fi networks where a Wi-Fi access point (AP) is installed at the vehicle and the AP is connected to an external base station (BS). In this paper, we conduct a measurement study on the uplink and downlink throughput for Internet access in vehicular Wi-Fi networks. We consider diverse network environments: high-speed train, car, and subway. Measurement results demonstrate that current Internet access in vehicular Wi-Fi networks are not satisfactory for interactive multimedia applications. Therefore, in-depth study on resource management in vehicular Wi-Fi networks is strongly required.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.337-347
• /
• 1997

The dynamic responses of highway bridges are varying depending on the features of either traveling vehicles or bridges. In this study, the probabilistic characteristics of dynamic amplification factors of highway bridges due to traveling heavy vehicles have been examined through analytical simulation processes. The truck with tandem axle and tractor with semitrailer are selected as the representative heavy vehicles, which are modeled with three dimensional 7-DOF and 12-DOF models, respectively. The analytical results have been compared with the experimental results of dynamic loading tests and the validity of the analytical models has been examined. Parametric studies on the means and extreme values of amplification factors have been performed with various traffic conditions such as vehicle types, vehicle weights, surface profiles, number of loading vehicles, loading positions, etc.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.143-156
• /
• 2003

도시로의 집중현상에 따라 차량이 증가함으로 한정된 공간에서의 도시교통난이 계속 악화되고 있는 실정이다. 도로상의 불법 주ㆍ정차위반차량으로 인해 차량소통에 불편을 주고, 주거 및 교통환경을 저해하기 때문에 견인업무는 주차정책을 실현시키는 강력한 수단으로써 반드시 필요하지만, 우리나라에서 불법 주ㆍ정차 차량의 견인부분에 대한 연구 및 결과는 극히 미비한 실정이다. 이에 따라 본 연구에서는 우리나라 주요 도시를 대상으로 불법 주ㆍ정차 차량의 견인운행 실태 및 특징을 비교, 견인제도의 문제점을 분석하여 개선방안을 검토하고자 하였다. 이의 내용으로는 각 시에서 추진 및 계획중인 지능형 교통체계(ITS), 버스 정보시스템(BIS) 및 차량 위치 자동 표시기(AVM)를 연계시켜 공차거리를 줄이는 등의 첨단체계를 구축하여 견인차량에 대한 운영을 효율적으로 하여야 할 것이고, 요금의 구조도 서울을 제외한 기존의 3단계 톤급별 요금구조에서 장래 대형차의 견인을 감안한 4단계의 톤급별 요금구조로의 조정방안이 필요하다. 견인비용에 있어서도 대부분의 도시가 수년전의 여건을 근거로 산출한 결과를 기준으로 요금을 징수하고 있어 현실에 맞지 않는 요금체계를 적용시키고 있는 실정이다. 따라서, 견인비용부분에 대하여도 장래의 경제여건을 감안한 탄력적 요금체계를 설정하여 경영합리화를 유도함이 바람직하다. 부가하여, 견인원가에 대한 사례분석 결과는 부천시를 중심으로 하여 현실성 있는 견인비용을 제시코자 하였다.

• Composites Research
• /
• v.28 no.2
• /
• pp.65-69
• /
• 2015

This study dealt with dynamic characteristics by real car crash simulation of composite support structures for road facilities. The effects of different material properties of composites for various car crash speeds are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of steel support structures using the LS-DYNA program is further extended to study dynamic behaviors of the support structures made of various composite materials. Based on the passenger safety assessment, the numerical results for various parameters are verified by comparing different models with internal energy occurred in the support and car.

• Review of KIISC
• /
• v.31 no.4
• /
• pp.17-21
• /
• 2021

최근 자율주행차량등의 활발한 기술 개발 및 상용화가 추진되고 있다. 차량통신기술은 자율주행차량이 주변 환경을 보다 정확하고 상세하게 인지하기 위하여 그 필요성이 강조되고 있는 실정이다. 이러한 차량통신기술의 활용성이 증대됨에 따라, 보안 위협에 대응하기 위한 보안 기술도 활발히 연구 개발 추진 중이며, 이와 연관된 국제표준화의 필요성도 부각되고 있다. IT 보안 국제표준화 기구인 ITU-T SG17에서는 최근 연구반 구조 조정을 진행했으며, ITS(Intelligent Transport System) 보안 연구반(Q13)은 지속적으로 차량통신표준화를 추진한다. 본 논문에서는 ITS 보안 연구반의 최근 활동 및 진행 계획을 소개한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.284-285
• /
• 1998

ISO TC108/SC2에서 취급하는 기계, 차량 및 구조물에 발생되는 기계진동과 충격의 측정 및 평가 기준에 대하여 살펴보았다. SC2내에는 현재 7개의 Working Group(WG)이 23개 기준에 대하여 보완 및 개정작업을 지속하고 있다. 이들 기준의 적용대상은 회전기계, 선박, 철도차량, 자동차 및 건물로서 본문에서는 기준 내용을 요약하고 개정과정도 일부 소개한다.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.323-328
• /
• 2012

The purpose of this study is to develop automated structural design and analysis aided-program of aluminum extrusion carbody structures for railway vehicle. This developed program is called "AUTO-RAP" and could perform simultaneously structural design and verification for railway carbody structures made of aluminum extrusion independent of expertise and experience of design engineers. Design engineers are able to conduct the knowledge-based design by providing database of existing aluminum extrusion or user-defined function. The design verification is automatically programmed to evaluate its structural integrity according to Korean Railway Safety Law or Urban Transit Safety Law. In addition, this program could automatically generate an executable file of various commercial finite element programs such as ANSYS and ABAQUS and CAD files such as .stp and .iges by GUI environment applications using MFC(Microsoft Foundation Classes). In conclusion, it is expected to contribute to reduce product design cost and time of carbody structures aluminum extrusions in railway industry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.951-960
• /
• 2006

Structural pavement analysis considering lateral loads of moving vehicle was carried out in order to simulate passing vehicle loads under various interface conditions. To verify of existing multi-layer elastic analysis of layer interface effect parameters, this study compared outputs by using ABAQUS, a three dimensional finite element program and KENLAYER, multi-layer elastic analysis as vertical load was applied to the surface of asphalt pavements. Pavement performance depending on interface conditions was quantitatively evaluated and fundamental study of layer interface effect parameters was performed in this study. As results of the study, if only vertical loads of moving vehicle is applied, subdivision of either fully bonded or fully unbonded is enough to indicate interface effect parameters. On the other hand, when lateral loads are applied with vertical loads, pavement behavior and performance are greatly changed with respect to layer interface conditions. The thinner thickness of the asphalt layer is and the smaller elastic moduli of the asphalt layer is, the more pavement behavior is influenced by interface conditions. In addition, regression analysis equation analytically computing tensile strain which was considered thicknesses and elastic moduli of the asphalt layer and layer interface effect parameters at the bottom of the asphalt layer was presented using database from numerical analyses on national pavement model sections.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.485-488
• /
• 2011

본 연구에서는 경부고속철도의 콘크리트궤도에서 열차주행안전측면에서 관리해야할 레일패드강성의 상한값을 차량 및 궤도의 동특성과 운영환경을 고려하여 결정하는 방법을 제시하였다. 차량과궤도의 상호작용의 해석의 중요 입력파라메타인 궤도틀림과 관련하여 프랑스 및 독일에서 제시한 궤도틀림 PSD(Power Spectral Density)와 경부 1단계구간 콘크리트궤도에서 계측한 궤도틀림 자료를 통하여 얻은 PSD를 기초로 하여 넓은 범위의 주파수영역에서 적용할 수 있는 콘크리트궤도의 궤도틀림 PSD를 제시하였다. 제시된 PSD 기준모델을 사용하여 시간영역에서의 궤도틀림 입력을 Random Generation을 통하여 구한 후 개발된 차량-궤도 상호작용해석 기법을 사용하여 레일패드에 따른 윤중감소율을 산정하였다. 산정된 윤중감소율에 대하여 국내 철도차량 안전기준에 관한 규칙의 탈선계수 규정을 적용하여 주행안전측면에서 허용할 수 있는 레일패드강성의 상한값을 제시하였다.