• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.79-88
• /
• 2002

As a part of NERI:;, Truck Shipment Safety Information is divided into Optimal Route Guidance system and Emergency Response system. This study which is for developing of Truck Shipment Incident Emergency Response System intends to prevent or early response damage caused by incidents through realtime monitoring about the position and the state of Hazard material transport truck. For this, we divide it into three scenarios; realtime monitoring, management of incidents, information provision to related organizations and present functional requirements and architecture coming with each scenario. As a result of the first step among total three steps, it would able to not only realtime management of trucks but also guide for auto-enforcement or management about illegal act like dumping scrapped material. It is now under examination about position of detection and technology of communication to application. From now on, it is expect to test in the range of Metropolitan after selecting appropriate technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.962-970
• /
• 2021

The cause of the majority of vehicle accidents is a safety issue due to the driver's inattention, such as drowsy driving. A forward collision warning system (FCWS) can significantly reduce the number and severity of accidents by detecting the risk of collision with vehicles in front and providing an advanced warning signal to the driver. This paper describes a low power embedded system based FCWS for safety. The algorithm computes time to collision (TTC) through detection, tracking, distance calculation for the vehicle ahead and current vehicle speed information with a single camera. Additionally, in order to operate in real time even in a low-performance embedded system, an optimization technique in the program with high and low levels will be introduced. The system has been tested through the driving video of the vehicle in the embedded system. As a result of using the optimization technique, the execution time was about 170 times faster than that when using the previous non-optimized process.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.905-910
• /
• 2022

Drowsy driving requires a lot of social attention because it increases the incidence of traffic accidents and leads to fatal accidents. The number of accidents caused by drowsy driving is increasing every year. Therefore, in order to solve this problem all over the world, research for measuring various biosignals is being conducted. Among them, this paper focuses on non-contact biosignal analysis. Various noises such as engine, tire, and body vibrations are generated in a running vehicle. To measure the driver's heart rate and respiration rate in a driving vehicle with a piezoelectric sensor, a sensor plate that can cushion vehicle vibrations was designed and noise generated from the vehicle was reduced. In addition, we developed a system for classifying whether the driver is sleeping or not by extracting the model using the CNN-LSTM ensemble learning technique based on the signal of the piezoelectric sensor. In order to learn the sleep state, the subject's biosignals were acquired every 30 seconds, and 797 pieces of data were comparatively analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.120-122
• /
• 2021

Currently, as demand for cars at home and abroad increases, the number of vehicles is decreasing and the number of vehicles is increasing. This is the main cause of the traffic jam. To solve this problem, it operates a high-ocompancy vehicle (HOV) lane, a multi-passenger vehicle, but many people ignore the conditions of use and use it illegally. Since the police visually judge and crack down on such illegal activities, the accuracy of the crackdown is low and inefficient. In this paper, we propose a system design that enables more efficient detection using imaging techniques using computer vision to solve such problems. By improving the existing vehicle detection method that was studied, the trigger was set in the image so that the detection object can be selected and the image analysis can be conducted intensively on the target. Using the YOLO model, a deep learning object recognition model, we propose a method to utilize the shift amount of the center point rather than judging by the bounding box in the image to obtain real-time object detection and accurate signals.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.51-59
• /
• 2024

In this paper, we propose a novel traffic safety system designed to reduce pedestrian traffic accidents and enhance safety on university campuses. The system involves real-time detection of vehicle speeds in designated areas and the interaction between vehicles and pedestrians at crosswalks. Utilizing the YOLOv5s model and Deep SORT method, the system performs speed measurement and object tracking within specified zones. Second, a condition-based output system is developed for crosswalk areas using the YOLOv5s object detection model to differentiate between pedestrians and vehicles. The functionality of the system was validated in real-time operation. Our system is cost-effective, allowing installation using ordinary smartphones or surveillance cameras. It is anticipated that the system, applicable not only on university campuses but also in similar problem areas, will serve as a solution to enhance safety for both vehicles and pedestrians.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.34-41
• /
• 2009

The latest vehicle yields a superior safety and reduction of driving burden by monitoring the driving state of vehicle and its environment with various sensors. To detect other vehicles and objects of the rear left and right-side blind spot area of driver, provide the information about a existence of objects inside the blind spot, and give a signal to avoid collision, this study proposes the intelligent outside rear-view mirror system. This task has substantially complicated several factors. For example, the size, geometry and features of the various vehicles which might enter the monitored zone is varied widely and therefore present various reflective characteristics. This study proposes the optimal specification and configuration of optical system and IR array sensor of blind spot detection system, and shows the results of the performance evaluation of developed system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.5
• /
• pp.525-532
• /
• 2014

The sensing of a stack coolant deficiency is very important in that cooling performance of a fuel cell, overheating prevention of a stack or coolant heater. This paper explains the performance comparison between the coolant contact/noncontact level sensors and coolant deficiency sensing logic using the pressure sensor in a stagnant or circulating flow. Throughout the comparison, the pressure sensor is more suitable than the other sensors in terms of the precision, fast response, sensing frequency. After the experiment, the pressure sensor is equipped to an FCEV(Fuel Cell Electric Vehicle) to verify sensing definitely. There was no miss-sensing using pressure sensor while FCEV runs in the conditions of the paved road and cross country road.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.17-20
• /
• 2019

번호판 자동인식 (ALPR: Automatic License Plate Recognition)은 지능형 교통시스템 및 비디오 감시 시스템 등 많은 응용 분야에서 필요한 기술이다. 대부분의 연구는 자동차를 대상으로 번호판 감지 및 인식을 연구하였고, 오토바이를 대상으로 번호판 감지 및 인식은 매우 적은 편이다. 자동차의 경우 번호판이 차량의 전방 또는 후방 중앙에 위치하며 번호판의 뒷배경은 주로 단색으로 덜 복잡한 편이다. 그러나 오토바이의 경우 킥 스탠드를 이용하여 세우기 때문에 주차할 때 오토바이는 다양한 각도로 기울어져 있으므로 번호판의 글자 및 숫자 인식하는 과정이 훨씬 더 복잡하다. 본 논문에서는 다양한 각도로 주차된 오토바이 데이트세트에 대하여 번호판의 문자 인식 정확도를 높이기 위하여 2-스테이지 YOLOv2 알고리즘을 사용하여 오토바이 영역을 선 검출 후 번호판 영역을 검지한다. 인식률을 높이기 위해 앵커박스의 사이즈와 개수를 오토바이 특성에 맞추어 조절하였다. 그 후 기울어진 번호판을 검출한 후 영상 워핑(Image Warping) 알고리즘을 적용하였다. 모의실험 결과, 기존 방식의 인식률이 47,74%에 비해 제안된 방식은 80.23%의 번호판의 인식률을 얻었다. 제안된 방법은 전체적으로 오토바이 번호판 특성에 맞는 앵커박스와 이미지 워핑을 통해서 다양한 기울기의 오토바이 번호판 문자 인식을 높일 수 있었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.443-444
• /
• 2019

본 논문에서는 라즈베리파이(Raspberry Pi)와 실시간 객체 감지 기술인 YOLO를 이용한 전기차충전기앞불법주차 경고 영상인식 시스템을 제안한다. 최근 전기 자동차의 사용과 더불어 충전 인프라는 점점 늘어나는 중이지만, 여전히 전기차 충전기는 많지 않은 것이 현실이다. 전국 1,000여 곳이 넘는 전기차 충전소에 대해 법령으로 인한 규제를 시행 중임에도 불구하고 불법주차를 하는 일반차 오너들은 여전히 많다. 이로 인해 전기차 오너들은 충전에 많은 불편함이 있다. 이 시스템은 전기 자동차의 번호판을 인식하여 실시간 객체 감지 딥러닝 기법인 YOLO를 이용해 전기 자동차의 번호판에 특정 부분을 인식하고 특정 부분이 없는 일반 자동차가 전기차 충전기 앞 불법 주차를 하게 되면 부저와 LED경고를 통해 주차된 일반 차량에게 경고를 하여, 불법 주차자와 더불어 주변을 지나가는 행인들에게도 전기차 앞 불법 주차에 대해 각인을 시켜줄 수 있는 시스템이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1229-1236
• /
• 2022

In this paper, we studied accident-aware smart streetlights to prevent secondary accidents when driving on highways. It used Arduino and sensors to inform drivers of weather conditions, incorporated functions such as LED brightness control according to sunlight and night driving vehicles, and used Raspberry Pi camera OpenCV to learn various traffic accidents, natural disasters, and wildlife.