• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.705-707
• /
• 2014

The vehicle network such as CAN, MOST, Ethernet has different protocols. In the case of Ethernet data, when data is transmitted from Ethernet to MOST150, it cannot be treated by Ethernet channel of MOST150, leading to data loss and transmission delays. Thus, this thesis proposes vehicle integration GATEWAY, which can form a network by organically connecting the Ethernet and MOST150 networks and minimize the delay and data losses caused by the differences in bandwidth.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.103-110
• /
• 2012

In Vehicle Safety Communication (VSC), noted as a representative application of VANET technologies, emergency warning messages (EWM) are broadcast over vehicles in response to an emergency situation. However, as the number of vehicles increases, the so-called Broadcast Storm Problem often occurs due to a huge number of redundant EWM transmitted. Though many approaches in the literature have been proposed to solve the problem, most of them require the preliminary phase for setting up or refreshing neighbor relationship through exchanging beacon messages with nearby vehicles, thereby further increasing the traffic load. In this paper, we propose Longest Leaping Relay (LLR) scheme which can efficiently solve the Broadcast Storm Problem without any preliminary phase for setting up neighbor relationship. Through computer simulations, we compared the performance of the proposed scheme with competitive schemes and verified the proposed scheme outperforms the existing schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2234-2239
• /
• 2010

In this paper, the performance of ad-hoc wireless network protocols is analyzed under the vehicular communication environments. We estimate the throughput and delay of the protocols with packet sizes and various data traffics in expressways and metropolis by using QualNet simulator. It turns out that the performance of DSR protocol is better in expressways and the performance of AODV works well in metropolitan areas. Therefore, it is necessary that the proper protocols should be selected to provide the better performance according to the vehicular communication environments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.216-217
• /
• 2018

IEEE 1609.2 표준은 WAVE (Wireless Access in Vehicular Environment) 표준에서 차량간(V2V, Vehicle-to-Vehicle) 혹은 차량과 인프라간(V2I, Vehicle-to-Infrastructure)통신 상의 응용 메시지 보호를 위해 제정되었다. 이 표준은 메시지 이증 및 무결성 검증을 위하여 NIST p256 타원 곡선 커브 기반의 ECDSA 전자서명 기법을 사용한다. 매우 복잡한 도신 상의 출퇴근 환경에서는 수백대의 자동차가 전송하는 메시지를 정상적으로 처리하기 위하여, 차량의 OBU(On-Board Unit) 혹은 노상의 RSU(Road-Side Unit)에서 서명된 메시지의 검증 성능이 매우 중요한 이슈가 될 수 있다. 본 논문에서는 V2X 통신에서 효율적인 ECDSA 서명 검증을 위하여, OBU 혹은 RSU 환경에서 CPU 상의 병렬 처리 성능을 테스트 한 후 시사점을 살펴본다.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.173-182
• /
• 2007

An innovative feature of this study is to propose a methodology for evaluating safety performance in real time based on vehicle trajectory data extracted from video images. The essence of evaluating safety performance is to capture unsafe car-following events between individual vehicles traveling surveillance area. The proposed methodology applied two indices including real-time safety index (RSI) based on the concept of safe stopping distance and time-to-collision (TTC) to the evaluation of safety performance. It is believed that outcomes would be greatly utilized in developing a new generation of video images processing (VIP) based traffic detection systems capable of producing safety performance measurements. Relevant technical challenges for such detection systems are also discussed.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.51-62
• /
• 2008

An innovative feature of this study is to propose a methodology for evaluating safety performance in real time based on vehicle trajectory data extracted from video images. The essence of evaluating safety performance is to capture unsafe car-following and lane-changing events generated by individual vehicles traveling within video surveillance area. The proposed methodology derived three indices including real-time safety index(RSI) based on the concept of safe stopping distance, time-to-collision(TTC), and the collision energy based on the conservation of momentum. It is believed that outcomes would be greatly utilized in developing a new generation of video images processing(VIP) based traffic detection systems capable of producing safety performance measurements. Relevant technical challenges for such detection systems are also discussed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.17-22
• /
• 2015

In this paper, we propose a cooperative vehicle communication scheme for high transmission efficiency and coverage extension under multipath fading environment of moving vehicle networks. The proposed scheme uses a Network coding scheme for improvement of receiving performance by using virtual Multiple-Input Multiple-Output(MIMO) transmit diversity. Simulation results have shown that the proposed scheme also provides alleviated Inter Symbol Interference(ISI) and Inter Channel Interference(ICI) as well as Signal-to-Noise Ratio(SNR) improvement and improve 3dB compared to the conventional scheme, since it can utilize the good properties of spatial diversity and coding gain by using virtual MIMO configuration. In this paper, we propose simulations of Ultra-Wideband(UWB) communication system to show validity by using the MATLAB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.126-129
• /
• 2015

Device-to-device (D2D) communications, a subset of Proximity-based Services that enables direct communication between LTE network subscribers, is gaining popularity. It is well underway to be adopted in cellular communication systems for pedestrian and connected-vehicles alike. In this paper, we briefly present our model of an Evolved Packet Core Network-assisted device discovery simulator and show the applicability of Proximity-based Services for Vehicular Ad-hoc Networks. Through the performance evaluation based on the developed simulation environment, it is shown that in case when users gather in the same vicinity, as in public transportation, LTE network data can be efficiently offloaded and multicasted through Wi-Fi for e.g. delivering traffic-related information and for the benefit of infotainment service consumers.

• Journal of the Korea Convergence Society
• /
• v.2 no.4
• /
• pp.1-7
• /
• 2011

As the developing of the information technology, M2M market that is using communication between devices is growing rapidly and many companies are involved in M2M business. In this paper, the concept of telematics and vulnerabilities of vehicle network security are discussed. The convergence of vehicle and information technology, the development of mobile communication technology have improved quality of service that provided to user but as a result security threats has diverse. We proposed new business model that be occurred to the participation of mobile carriers in telematics business and we analyzed mobile radio communication network security vulnerabilities. We proposed smart phone and Vehicle authentication scheme with M2M device as a way to solve vulnerabilities.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.