• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.102.1-102.1
• /
• 2012

Ti 및 Ti 합금은 치과 및 정형외과 등의 분야에서 생체재료로써 다양한 용도로 적용되고 있으며, 보다 안전하고 우수한 특성의 Ti 합금 개발에 대한 관심이 높아지고 있다. 본 연구에서는 Ti-Nb-Ge 합금의 초탄성 특성에 미치는 집합조직의 영향에 대해 조사하였다. 집합조직 제어를 위해 등속 및 이주속 압연을 적용한 후 $850^{\circ}C$에서 30분~2시간까지 어닐링하였다. 광학현미경과 SEM-EBSD를 이용하여 미세조직 및 집합조직을 분석하고, 순환식 인장시험을 통해 시편의 초탄성 특성을 평가하였다. 등속압연 후 어닐링한 시료의 경우 alpha-fiber 집합조직이 발달하는 한편, 이속압연 후 어닐링한 시료는 {113}// 및 {331}의 집합조직이 발달하는 것으로 나타났다. 마르텐사이트 변태에 의한 변형회복능과 집합조직 성분별 강도의 관계를 비교한 결과, alpha-fiber 집합조직이 발달할수록 변형회복능이 증가하는 것으로 나타났다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.48.1-48.1
• /
• 2009

Ti합금은 생체적합성이 우수하여 생체재료로 널리 사용되어 왔으며, 특히 Nitinol로 알려진 Ti-Ni합금은 형상기억특성 및 초탄성특성을 지녀 치열교정용 와이어나 혈관확장용 스텐트 등으로 사용되어 왔다. 최근 Ni과 같은 세포독성 합금원소의 용출가능성이 문제가 되어 Ni을 함유하지 않는 Ti합금이 주목받고 있다. 본 연구에서는 Ti-Nb-Ge 합금의 집합조직과 초탄성 및 기계적 특성의 관계를 고찰함으로써, 사용목적이나 요구특성에 부합되는 가공열처리방법을 도출하고자 하였다. 비소모전극식 진공아크용해장치를 이용하여 Ti-Nb-Ge 합금 버튼을 만들고, 이를 $1000^{\circ}C$에서 30분간 유지 후 얼음물에 급랭처리하였다. 이후 집합조직 제어를 위해 등속압연 및 이속압연의 두가지 방법으로 냉간압연한 후, $850^{\circ}C$에서 30분~2시간까지 열처리하였다. 광학현미경과 투과전자현미경을 이용하여 미세조직을 관찰하고, X-선 회절분석법을 이용하여 집합조직을 분석하였다. 또한 순환식 인장시험을 통해 시편의 초탄성 특성 및 기계적 성질을 평가하였다. 등속압연재는 {001}<110>에서 {111}<110>에 이르는 $\alpha$-fiber가 발달하는 한편, 이속압연재는 {001} 및 {111}가 발달하는 것으로 나타났다. 또한 압연방향으로 <110>이 평행한 집합조직이 발달할수록 초탄성 특성이 높게 나타났다. 이는 응력유기 마르텐사이트 변태 시 $\beta$의 <110>방향이 $\alpha$" <010>방향으로 변할 때 길이가 증가하므로, 시편에 인장방향으로 <110>이 평행한 집합조직이 발달할수록 응력유기 마르텐사이트 변태가 용이해지기 때문인 것으로 사료된다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.201-206
• /
• 2001

The evolution of textures in Fe-Ni alloy thin films fabricated by PVD using a sputtering method was investigated with parameters such as deposition time and chemical composition. The textures of the as-deposited films were characterized by fibre-type. In Invar alloy(Fe-36.5 wt%Ni) thin film, the <110>//ND fibre texture as a starting component changed to the <210>//ND fibre texture with increasing deposition time. In Permalloy(Fe-81 wt%Ni) thin film, a mixture of the <221>//ND and <311>//ND fibres developed at the early stage of deposition, and then transformed to the <210>//ND fibre with increasing deposition time. These texture changes were discussed in terms of relationship with the microstructural evolution of the films.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.46-52
• /
• 2000

Aluminum can to can recycling was divided into two stpes. The first step was composed of the processes such as collection of used beverage cans (UBC), shredding, magnetic separation, De-laquiring, melting and casting. The second one was remelting and casting, heat treating, hot and cold rolling, annealing, and can making. In this study, the effect of alloying elements on the microstructure and texture of the secondary ingots made by Al UBC was investigated. In aluminum can to can recycling, the second phase particles appeared in the solidification stage must be controlled by heat treatment. The optimum heat treatment condition was $615^{\circ}C$ for 5hrs. the texture in hot rolled sheet was depressed with increasing Mn content, on the other hand, Si and Fe elements promoted the texture development. The textures of can-body sheet should be controlled in the hot rolling and annealing stage because can was formed from cold rolled sheet without heat treatment.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.629-635
• /
• 2000

The texture evolution during isothermal forging and subsequent heat treatment in Ti-48.5at%Al-0.6at%Mo alloy was investigated. Especially, in the present study, research interest was focused on the interrelation between lamellar volume fraction and textures varied with the change of heat-treated time and temperature. It was found that texture components having ND┴{302) and TD$\perp${100} with minor TD$\perp${111} were developed by isothermal forging. In addition, when the followed heat-treatment time and temperature increased from $1330^{\circ}C$/10h to $1350^{\circ}C$/20h respectively, both the lamellar volume fraction and the intensity of textures mentioned above also gradually increased. However, the tensile elongation at room temperature decreased oppositely, as the lamellar volume fraction increased. These results suggested that tensile properties of $\gamma$-TiAl with the nearly lamellar microstructure at room temperature were affected more strongly by the microstructural features such as lamellar volume fraction rather than by textures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.112-115
• /
• 1999

The effect of intermediate annealing on the texture evolution in I.f steel was investigated by using X-ray texture measurement. After The sample was cold rolled to 80% reduction intermediate annealing was introduced to preform ${\gamma}$-fiber orientation grains in deformed matrix. The annealing time was varied between 30 and 3600 sec, These samples were cold rolled to 90% reduction and full annealed. By intermediate annealing final full annealed samples had very homogeneous ${\gamma}$-fiber orientation resulting in good deep drawability.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.111-111
• /
• 1999

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.14-15
• /
• 2003

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.43-49
• /
• 1993

Excellent deep drawability and strain aging rsistance are obtained by the addition of alloying elements such as Ti and Nb which can form carbide and nitride easily into Al killed extra low carbon steel. Recrystallization textures and mechanical properties of the three different extra low carbon steels with B containing Nb only, Ti only, and both Nb and Ti, respectively, along with have been compared. Inverse pole figure shows that (100) and (111) texture intensities of Nb containing steel changed a lot during the annealing treatment and the degree of texture-structural change in the steel containing both Nb and Ti is about the same as that in the Ti-containing 5teel. After annealing the pole figure shows that the {Ill} < 110 > and {112} < 110> textures are the strongest in the cold rolled state and the annealed state, respectively. However, there is little difference in texture structure among the three kinds of steels. There is a tendency that the steel containing both Nb and Ti the grain size of which is the smallest is the highest in hardness. Nb-containing steel is the next and Ti -containing steel is the last in hardness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.57-66
• /
• 2006

AA5182-polypropylene sandwich sheet was manufactured, and the mechanical properties evaluation was executed in order to identify $L{\ddot{u}}ders$ band that causes fabrication process problem and especially surface roughness. To identify formability, deformation behavior, plastic strain ratio (R-value) and pole figure were measured, and texture analysis was performed. In the case of sandwich sheet, the unstable deformation behavior has decreased. As well, for sandwich sheet, A1 skin could manage the most of load, and the elongation has improved about 45% more than that of A1 skin. The plastic strain ratio of A1 skin and sandwich panel, which indicates serration behavior, was obtained from instantaneous plastic strain ratio evaluation. Also, the planar anisotropy of sandwich sheet has decreased more than that of A1 skin. According to these results, the sandwich sheet produced lightening effect and could control unstable deformation characteristic, that is, surface roughness caused by $L{\ddot{u}}ders$ band. Furthermore, it was proved that the texture control of the rolling attachment of A1 skin is necessary to improve the formability of the sandwich panel.