• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.156-161
• /
• 2004

This study was conducted to investigate the effects of soil amendment with different characteristics on plant growth, fruit yield and quality of oriental melon for continuous cropping under protected cultivation. Humus layers in arable soil was disturbed because soil amendment from hillside to oriental melon field was continued to resolve problems for continuous cropping. Water potential and hardness of soil was decreased in sandy loam with lower clay contents compared with loam and silty clay. Leaf length and area, fresh and dry weight of plant at earlier growing stage were higher, but chlorophyll contents of leaves were dropped in sandy loam compared with silty clay soil. Fruit size and weight was higher in sandy loam, but soluble solid and color of fruit were increased in silty clay. Marketable and unmarketable yield and quantity of fermented fruit were the highest in sandy loam. Hardness and weight of fruit were decreased by longer storage period and soluble solids of fruit was peaked at 5 day after storage, but decreased by prolonged continued storage. Because of these results, soil characteristics of amendment to oriental melon field should be considered as an important factor for quality and yield of oriental melon.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.33-56
• /
• 1998

This study examines the characteristics of service economies and their impacts on the spatial transformation of Korea during the last IS years. This study reviews the different perspectives for the tertiarization Process. It focuses on the spatial variation in the growth and location of Producer service industries. Based on the analyses of industrial and occupational compositions, services. particularly producer services, have played a major role in creating new job opportunities since the late 1980s. The ratio of services to merchandise trade is approximately 1:4, but service trades have increased since the early 1990s. Producer service activities have grown very rapidly, and the information processing service has been over-concentrated in Seoul. Further headquarters of bank and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have linkage Pattern on a nationwide scale. The pattern of employment growth in producer services shows a clear core-Periphery disparity. In the light of the observed pattern of regional differentiation in producer service employment, some wider implications of the distribution of producer service activities for regional economic Performance are considered.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.87-95
• /
• 2003

The fabrication process and the structure of PIN semiconductor detectors have been designed optimally by simulation for doping concentration and width of p+ layer, impurities re-contribution due to annealing and the current distribution due to guard ring at the sliced edges. The characteristics to radiation response has been also simulated in terms of Monte Carlo Method. The device has been fabricated on n type, $400\;{\Omega}cm$, orientation <100>, Floating-Zone silicon wafer using the simulation results. The leakage current density of $0.7nA/cm^2/100{\mu}m$ is achieved by this process. The good linearity of radiation response to Cs-137 was kept within the exposure ranges between 5 mR/h and 25 R/h. This proposed process could be applied for fabricating a PIN semiconductor detector for measuring individual dose.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1056-1061
• /
• 2018

In this study, we propose the structure of color glass for BIPV (Building Integrated Photovoltaic System) and develop process technology to realize it. It was verified through computer simulation based on wave optics that two different kinds of metal oxide thin films with different refractive indices could be integrated to realize different colors with good transmittance. To fabricate the structure, we used RF Magnetron deposition method to achieve the target thickness uniformly. The optical analysis of the samples was carried our by comparing with the results of computer simulations and it was found that this technique can be stably implemented on lab scale. The stability test over weeks was confirmed at room temperature. This method is expected to be very useful in BIPV buildings.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.261-273
• /
• 2022

This study aims to analyze whether facilities linked to the inside and outside of the station affect the revitalization of commercial spaces inside the station where individual rental stores are clustered. Rent, which can replace sales, was set as the determining factor for revitalization. In addition to the variables related to sales, culture, office work/residential, public institutions, and transportation facilities, the independent variables were the number of daily passengers, which is a location factor of the station, and the product sales business, which accounts for the largest number of industries in the commercial space inside the station. As a result of regression analysis, it was proved that rent has an effect on product sales business, linked sales facilities, transportation facilities, and the number of passengers on board. These results indicate that the formation of sales products that can increase purchasing power and the direction of facility linkage that can increase the inflow population into the station are needed to revitalize commercial spaces in the station. In this study, the establishment of a living-friendly SOC for residents' convenience daily life was suggested as a policy management plan for stations with a high vacancy rate due to reduced vitalization.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.50-60
• /
• 2023

Ball Grid Array (BGA) is a widely used package type due to its high pin density and good heat dissipation. In BGA, solder balls play an important role in electrically connecting the package to the PCB. Therefore, understanding the inelastic deformation of solder balls under various mechanical loads is essential for the robust design of semiconductor packages. In this study, the geometrical effect on the inelastic deformation and fracture of solder balls were analyzed by finite element analysis. The results showed that fracture occurred in both tilted and hourglass shapes under shear loading, and no fracture occurred in all cases under compressive loading. However, when bending was applied, only the tilted shape failed. When shear and bending loads were combined with compression, the stress triaxiality was maintained at a value less than zero and failure was suppressed. Furthermore, a comparison using the Lagrangian-Green strain tensor of the critical element showed that even under the same loading conditions, there was a significant difference in deformation depending on the shape of the solder ball.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.435-445
• /
• 2007

Snoop protocol is one of the efficient schemes to compensate TCP packet loss and enhance TCP throughput in wired-cum-wireless networks. However, Snoop protocol has a problem: it cannot perform local retransmission efficiently under the bursty-error prone wireless link. To solve this problem, SACK-Aware-Snoop and SNACK mechanism have been proposed. These approaches improve the performance by using SACK option field between base station and mobile host. However in the wireless channel with high packet loss rate, SACK-Aware-Snoop and SNACK mechanism do not work well because of two reason: (a) end-to-end performance is degraded because duplicate ACKs themself can be lost in the presence of bursty error, (b) energy of mobile device and bandwidth utilization in the wireless link are wasted unnecessarily because of SACK option field in the wireless link. In this paper, we propose a new local retransmission scheme based on Cross-layer approach, called Cross-layer Snoop(C-Snoop) protocol, to solve the limitation of previous localized link layer schemes. C-Snoop protocol includes caching lost TCP data and performing local retransmission based on a few policies dealing with MAC-layer's timeout and local retransmission timeout. From the simulation result, we could see more improved TCP throughput and energy efficiency than previous mechanisms.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.140-145
• /
• 1997

The change of physico-chemical properties of paddy soil was monitored under different tillage. This study was conducted on Jeonbug silty cly loam, in Honam Agricultural Experiment Station, for four years starting from 1992. Different tillage involved (1)Continued no tillage, (2)Rotavation only with tractor every year, (3)Spring plowing with power tiller plus rotavation with tractor every year. The result of this study can be summarized as: Non tillage, when continued for some years, tended to increase 1)the hardness of soil, 2)the root density in the top soil, 3)the occurrence of annual and perennial weeds, and tended to lower the yield of rice compared to normal tillage(tilling with ow tiller in the spring plus rotavation by tractor before planting.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.86-96
• /
• 2000

The representative area among the ones whose cost increases as the integration ratio increases is the test area. As the relative cost of hardware decreases, the BIST method has been focued on as the future-oriented test method. The biggest drawback of it is the increasing test time to obtain the acceptable fault coverage. This paper proposed a BIST implementation method to reduce the test times. This method uses an input grouping and test point insertion method, in which the definition of test point is different from the previous one. That is, the test points are defined on the basis of the internal nodes which are the reference points of the input grouping and are merging points of the grouped signals. The main algorithms in the proposed method were implemented with C-language, and various circuits were used to apply the proposed method for experiment. The results showed that the test time could be reduced to at most $1/2^{40}$ of the pseudo-random pattern case and the fault coverage were also increased compared with the conventional BIST method. The relative hardware overhead of the proposed method to the circuit under test decreases as th e size of the circuit to be tested increases, and the delay overhead by the BIST utility is negligible compared to that of the original circuit. That means, the proposed method can be applied efficiently to large VLSI circuits.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.137-145
• /
• 2022

A directional coupler device, one of the fundamental components of photonic integrated circuits, distributes optical power by evanescent field coupling between two adjacent optical waveguides. In this paper, the design process for manufacturing a directional coupler device is reviewed, and the accuracy of the design results, as seen from the characteristics of the actual fabricated device, is confirmed. When designing a directional coupler device through a two-dimensional (2D) beam-propagation-method (BPM) simulation, an optical structure is converted to a two-dimensional planar structure through the effective index method. After fabricating the directional coupler device array, the characteristics are measured. To supplement the 2D-BPM results that are different from the experimental results, a 3D-BPM simulation is performed. Although 3D-BPM simulation requires more computational resources, the simulation result is closer to the experimental results. Furthermore, the waveguide core refractive index used in 3D-BPM is adjusted to produce a simulation result consistent with the experimental results. The proposed design procedure enables accurate design of directional coupler devices, predicting the experimental results based on 3D-BPM.