• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.11a
• /
• pp.233-240
• /
• 2002

식물체내에 미량으로 생성되어 식물체내의 생리적인 작용을 크게 변화시켜 식물의 생장과 발육을 촉진 또는 억제하는 생장조절물질의 종류로는 Auxin, Cytokinin, Gibberellin, Abscisic acid, Ethylene, Brassinosteroids, Polyamine, Jasmonates 등이 있다(byun, 1982). Gibberellin은 포도의 경우 씨 없는 포도(무핵과)를 만드는 기술이 델라웨어 품종을 주축으로 실용화 되어있고(Weaver, 1972) 배의 행수와 신고 품종에서는 Gibberelli paste처리에 으해 5∼7일의 숙기 촉진과 함께 과중의 비대에 효과가 있으나 이러한 Gibberellin 계통의 식물생장조절제 사용으로 과실의 경도가 낮아지고 부패과, 밀병 및 분질화 등의 생리장해가 발생하고 보구력이 크게 떨어지는 단점이 있다. (중략)

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.150-162
• /
• 1988

The dynamic fracture toughness, $K_{Id}$,is measured in the heat-treated and ion-nitrided Cr-Mo, Ni-Cr-Mo steel using standard and Precracked Charpy specimens an imstrumented impact machine. The value of $K_{Id}$and both the energy of initiate fracture, and the total energy of fracture. Since the $K_{Id}$values of the precraked impact specimens are in accord with their theoretical ones, this testing method is sufficently practical. The effect of ion-nitriding are found to be larger than the heat-treaded specimen.

• Annual Conference of KIPS
• /
• 2014.11a
• /
• pp.650-653
• /
• 2014

기존의 소프트웨어 개발은 SW품질을 중요시 하지만, 고품질에 대한 문제가 아직도 존재한다. 또한 기존 레가시 시스템는 개발자나 설계의 부재 경우가 많고, 코드의 내부 복잡도와 모듈간의 결합도가 높을 가능성이 높다. 따라서 코드 가시화를 통한 복잡도 개선은 고품질화과 더불어 코드 모듈의 재사용과 유지보수등과 직접적 관련성이 있다. 본 논문은 기존 SW가시화용 자동 Tool Chain 기반에서 여러 리펙토링 방법 절차 적용으로 복잡도 개선을 제안 한다. 이런 코드 가시화가 결과적으로 타깃의 결합도를 줄일 수 있다. 기존의 레가시 코드에 자동 Tool chain적용은 고품질 적용이 충분히 예상된다.

• Korean journal of applied entomology
• /
• v.16 no.3 s.32
• /
• pp.149-154
• /
• 1977

Effect of Simazine(2-chloro-4,6-bis (ethylamino)-s-triazine), Nitrofen (2, 4-dichloro-4' -nitrodi­phenylether), Propanil (:3, 4-dichloropropionanilide), and Butachlor (2-chloro-2, 6-diethyl N-(buthoxy­menthyl) acetanilide on urea hydrolysis and subsequent nitrification was investigated in an upland soil incubated at $20\pm1^{\circ}C$. 1. All the herbicides tested had no effect on the hydrolysis of urea to ammonia at the recommended rates. Butachlor, at ten and fifty times the recommended rate, and Nitrofen, at fifty times the recommeded rate, depressed urea hydrolysis, resulting in reduction of ammonia. But the depressive effects were temporary, disappearing soon. Simazine and Propanil had no detrimental effect on urea decomposition at all the treated rates. 2. Also, all the chemicals tested had no effect on the nitrification process at the recommended rates. At higher concentrations of ten and fifty times the recommended rate Butachlor and Nitrofen inhibited the oxidation of nitrite, and propanil long inhibited the oxidation of ammonium to nitrite, but was inactive against nitrite oxidizer. These inhibitive effects of the chemicals, however, disappeared in the later period of incubation. Simazine had no effect on the nitrification process at all the treated rates. 3. The trend of change in soil pH of both the treated and untreated plots well reflected the change of soil nitrogen forms during incubation. No direct effect of the chemicals on soil pH was obserbed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.130.1-130.1
• /
• 2010

분리판(Bipolar plate)은 MEA 및 GDL의 구조적지지, 연료와 산화제를 공급해 주는 통로역할, 발생한 전류의 수집 및 전달, 그리고 반응 생성물의 수송 및 제거 등의 다양한 역할을 한다. PEMFC 및 DMFC의 분리판에 주로 사용되고 있는 재질은 Graphite 및 금속 물질이다. Graphite는 내부식성이 좋고 가벼워 현재 가장 많이 사용되고 있지만, 가공이 어렵고 깨질 위험이 있으며 두껍고 비교적 값이 비싸다. 금속은 가공성이 좋고 높은 전기 전도도를 가지며 가격이 저렴한 반면, 내부식성이 좋지 않은 단점이 있다. 연료전지를 실용화하는데 있어 중요한 문제 중 하나는 전지 성능의 수명과 경제성이며, 위와 같은 Graphite와 금속의 특성으로 인하여, Graphite 분리판을 금속 분리판으로 대체하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 원가절감을 위한 대량생산공정 중 하나인 염욕질화공정의 도입 및 적용을 위한 목적으로, 다양한 처리조건에 의해서 금속 표면을 처리하였으며, 표면처리된 금속은 부식특성, 접촉저항, 및 내구성 등을 평가하고 이를 통하여 금속계 분리판 적용성에 대해 알아보고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.176-176
• /
• 2010

전자기술이 발전함에 따라 전자부품 소자는 소형화, 다기능화, 고집적화, 대용량화 되고 있다. 그에 따른 부품들의 고밀도화는 높은 열을 발생시켜 각종 전자부품을 기판으로부터 단락 시키거나 기능을 상실하게 하는 문제점이 발생된다. 이와 같은 문제점을 해결하기 위해서는 발생된 열을 가능한 빠르게 방열 시켜주는 것이 대단히 중요하고 높은 방열 특성을 가지는 금속 PCB기판의 중요성이 높아지고 있다. 하지만 금속을 PCB에 적용하기 위해서는 금속기판과 회로전극사이에 절연층이 반드시 필요하다. 본 실험에서는 RF-Magnetron Sputtering 방법을 이용하여 AlN(질화알루미늄)을 절연물질로 사용, Aluminum기판위에 후막을 제작하여 열적 전기적 구조적 특성을 분석 하였다. 스퍼터링시 아르곤과 질소 분압비에 따른 특성과 후막의 두께에 따른 열적, 전기적, 구조적 특성을 측정 분석하였고, 후열처리를 통하여 AlN 후막의 특성 측정 결과 $200^{\circ}C$로 후열처리 했을 경우 절연파괴전압이 후열처리 전 0.56kV보다 1.125kV로 높아지고 SEM 이미지 상의 AlN 입자 밀도가 더욱 조밀해지는 것으로 확인 하였다. 결론적으로 AlN를 RF-Magnetron Sputtering 방법으로 증착 금속 PCB의 절연물질로 적용하기 위해서는 적정한 가스분압비와 후열처리가 필요하며 이를 통하여 금속 PCB의 절연층으로 응용 가능성이 높을 것으로 사료된다. 본 연구는 한국 산업기술 진흥원의 사업화 연계 연구개발(R&BD)사업의 연구비 지원에 의한 것입니다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.4
• /
• pp.292-296
• /
• 2000

Mechenochemical reaction by planetary type ball mill is applied to prepare $Sm_2$$Fe_{17}$$N_{x}$ permanent magnet powders. Starting from pure samarium and iron powders, the formation process of hard magnetic $Sm_2$$Fe_{17}$$N_{x}$ phase by ball milling and a subsequent solid state reaction were studied. At as-milled stage powders were found to consist of amorphous Sm-Fe and $\alpha$-Fe phases in all composition of $Sm_2$$Fe_{100-x}$(x = 11, 13, 15). The dependence of starting composition of elemental powder on the formation of Sm-Fe intermetallic compound was investigated by heat treatment of as-milled powders. When Sm concentration was 15 at%, heat-treated powder consists of mostly $Sm_2$$Fe_{17}$$N_{x}$single phase. For synthesizing of hard magnetic $Sm_2$$Fe_{17}$$N_{x}$ compound, additional nitriding treatment was carried out under $N_2$gas atmosphere at $450^{\circ}C$. The increase in the coercivity and remanence was parallel to the nitrogen content which increased drastically at first and then gradually as the nitriding time was extended. The ball-milled Sm-Fe-N powders were expected to be prospective materials for synthesizing of permanent magnet with high performance.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.690-695
• /
• 2018

Advanced oxidation processes (AOPs) composed of O3 and UV were applied to degrade penicillin (PEN). The degradation efficiency was evaluated in terms of changes in the absorbance (ABS) and total organic carbon (TOC). The combination of $O_3/H_2O_2/UV$ and $O_3/UV$ showed the best performance for the reduction of ABS (100% for 9 min) and TOC (70% for 60 min) values, although the mineralization was uncompleted under the experimental condition in this study. The change in biotoxicy was monitored with Escherichia coli susceptibility and Vibrio fischeri biofluorescence. The E. coli susceptibility was eliminated completely for 9 min by $O_3/UV$, and the toxicity to V. fischeri biofluorescence was 57% reduced by $O_3/H_2O_2/UV$. For the ultimate treatment of PEN, it is suggested that an AOP using $O_3/UV$ is followed by biological treatment, utilizing the enhanced biodegradability by the AOP. During 30 min of $O_3/UV$ treatment, the $BOD_5/COD$ ratio as an indication of biodegradability showed about 4-fold increment, compared to that of using a non-treated sample. TOC removal rate for AOP-pretreated PEN wastewater increased 55% compared to that of using the non-pretreated one through an aerobic biological treatment by Pseudomonas putida for artificial wastewater containing 20 mg/L of PEN. In conclusion, $O_3/UV$ process is recommended as a pretreatment step prior to an aerobic biological process to improve the ultimate degradation of penicillin.

• Environmental Mutagens and Carcinogens
• /
• v.10 no.2
• /
• pp.85-92
• /
• 1990

The effects of aphidicolin (APC), 2`,3`-dideoxythymidine 5`-triphosphate (ddTTP), and novobiocin (NOV) on the frequencies of chromosome aberrations induced by ethyl methanesulfonate (EMS) or bleomycin (BLM) were examined in synchronized Chinese hamster ovary (CHO)-K$_1$ cells. The cells were synchronized by the thymidine double block method. APC, ddTTP and NOV alone did not affect the frequencies of chromosome aberrations. The cells in late G$_1$ and early S phases were sensitive to the induction of chromosome aberrations by EMS, wherase cells in G$_2$ phase were most sensitive to chromosme aberration by BLM.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.600-607
• /
• 2011

Recently, high carbon steel has become essential not only for shipbuilding parts, but also mass production. Its surface has been treated by carburizing, nitriding and induction hardening, but these existing treatments cause considerable deformation and increase the expense of postprocessing after treatment; furthermore, these treatments cannot be easily applied to parts that requiring the hardening of only a certain section. This is because the treatment cannot heat the material homogeneously, nor can it heat all of it. Laser surface treatment was developed to overcome these disadvantages, and when the laser beam is irradiated on the surface and laser speed is appropriate, the laser focal position is rapidly heated and the thermal energy of surface penetrates the material after irradiation, finally imbuing it with a new mechanical characteristic by the process of self-quenching. This research estimates the material characteristic after efficient and functional surface treatment using HPDL, which is more efficient than the existing CW Nd:YAG laser heat source. To estimate, microstructural changes and hardness characteristics of two parts (the surface treatment part, and parental material) are observed with the change of laser beam speed and surface temperature.