• Membrane Journal
• /
• v.20 no.4
• /
• pp.267-277
• /
• 2010

Gas separation membranes have been developed for decades in various areas to replace the conventional processes. Membrane processes for gas separation have many advantages of energy saving, compact size, and easy scale-up. Nowadays, gas separation processes is widely spreaded in nitrogen generating system, hydrogen generating system, membrane dryer, on board inert gas generating system, natural gas purification, biogas purification and fuel cells. Carbon dioxide separation process using membrane would be a strong candidate of carbon dioxide capturing process. In order to broaden the scope of application of gas separation membranes, development of new materials which can overcome the borderline of Robeson's plot should be necessary, so that many researchers and companies are trying to develop the new materials like polymers containing cardo and spiro group and PIMs (polymers for intrinsic microporosity).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.330-330
• /
• 2010

하나로 노심에서 발생하는 열중성자를 감속재인 액체수소층을 통과시켜 냉중성자를 생산 하는 설비인 냉중성자원 시설은 초경량 합금, 신소재 및 DNA 구조연구 등의 첨단기술연구에 유용한 도구로 활용될 계획이며, 현재 원자력연구원에서는 냉중성자원 시설을 개발하여 제작 설치하였고, 이 장치들에 대해 기능시험을 수행하였다. 냉중성자원 시설계통에서 가스블랭킷계통은 수소의 외부누출을 방지하고, 진공용기를 포함한 수조내기기 내부로 공기 및 경수가 유입되지 않도록 하여 냉중성자원을 보호하기 위한 역할을 수행한다. 또한 가스블랭킷계통의 구성은 가스공급장치($N_2$ 및 He 가스 실린더로부터 가스공급 기능), 질소충압탱크, 진공박스, 수소박스, 밸브박스 및 각 구역별 독립 배관 등으로 되어있다. 이동식 진공배기장치는 가스블랭킷계통에서 사용하기 위해 특수하게 제작된 장치로서 진공계통과 수소계통의 초기충진 시 또는 계통배기 시 잔류가스를 제거하거나, 블랭킷가스의 오염검사를 위한 시료채취 기능 등을 수행할 수 있도록 되어있다. 본 논문에서는 냉중성자원장치 내의 수소계통 및 진공계통의 배관과 기기를 외기와 경수로부터 안전하게 격리시키기 위해서 제작설치 적용된 가스블랭킷계통에서 이동식 진공배기장치를 이용하여 잔류가스 제거방법과 각 가스블랭킷 영역으로부터 시료를 채취하여 수행된 산소농도 분석에 대해 기술하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.42-49
• /
• 2007

In this study, we analyzed flow characteristics of micro-nozzles for basic research to develop micro propulsion system. Cold gas propulsion system was used, and micro-nozzles having nozzle throat diameters of 1.0, 0.5, 0.25 mm were fabricated with EDM method. Thrust was measured through the use of plate-spring and strain gage based thrust measurement system, and flow characteristics of micro-nozzles were analyzed under ambient condition and vacuum condition. We used argon and nitrogen gases as propellant, and compared experimental results with CFD analysis. From the result, we verified the flow losses of viscosity and back-pressure caused by minimization of nozzle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.142-142
• /
• 2013

DBD (Dielectric Barrier Discharge) 대기압 플라즈마를 이용한 a-Si 식각기술에 대한 연구결과를 논하고자 한다. 기술개발의 목적은 대면적 TFT-LCD 혹은 Flexible Display 공정에 적용가능한 대기압 플라즈마 식각장치의 개발 및 검증이다. 실험에서 식각 가스로는 SF6, NF3 등을 사용하였으며, 질소를 기본 가스로 사용하였다. 검증용으로 개발된 대기압 플라즈마 식각 장치는 대기압 플라즈마 장치를 연속적으로 통과하는 in-line system 형식으로 개발되었다. 검증에 사용된 대기압 플라즈마 장치는 300 mm의 방전 폭으로 1세대 LCD기판의 처리가 가능하다. 대기압 플라즈마 식각 기술 개발에서 식각율에 영향을 미치는 변수들은 기판의 온도, 식각가스의 농도, 기판의 이송속도, 기판과 플라즈마 발생장치 사이의 간격 그리고 플라즈마의 인가 전력 등으로 크게 구분지어 생각할 수 있다. 개발된 식각 장치는 SF6를 사용하는 경우 최대 환산 식각율은 500 nm/min 정도이다. 식각 기술에서 중요한 식각 Uniformity와 그와 연관된 a-Si/SiNx 식각 선택비는 사용하는 가스의 Recipe 개발에 중점을 두고 연구를 진행하였다. 식각 Uniformity는 약 7% 이내의 균일도를 갖고 a-Si/ SiNx의 선택비는 10이상의 결과를 얻었다. 또한 식각 가스는 식각 profile에 영향을 줄 수 있는데 대기압 환경에서 형성되는 collisional sheath에도 불구하고 비 등방성 식각이 가능하였다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.8-12
• /
• 2010

Purpose: In $^{18}F$-FDG automated synthesizer, deliver is done in automated mode after synthesis until the dispenser. After the delivery, the yield is calculated from the radioactivity which was read by the dose calibrator located in the dispenser. However, when the distance between the automated synthesizer and the dispenser is far, there are $^{18}F$-FDG residues, which results in loss of the amount of $^{18}F$-FDG. This study investigated the usefulness of a method that minimizes $^{18}F$-FDG residues. Materials and Methods: The structure of the tubing between the (TRACERlab Mx FDG; GE.) and the dispenser is that the distance is 8 m and the internal diameter is 1/16 inch. The synthesis process of The module goes through the synthesis process of trap, synthesis, delivery in the automated module. The time taken for synthesis is about 25 to 26 minutes, after which rinsing is done. However, after rinsing, as the distance of the tubing increased, there were 10~13% of $^{18}F$-FDG residues. Therefore, a method of using push syringe and $N_2$ gas in manual mode to minimize $^{18}F$-FDG residues is analyzed. Results: In manual mode, there were $^{18}F$-FDG residues of 4~5% for the push syringe, and there were $^{18}F$-FDG residues of less than 1% for the $N_2$ gas, which showed that the method using $N_2$ gas had superior usefulness. Also, there were no $^{18}F$-FDG residues in the cleaning the next day. Conclusion: The distance between the synthesizer and the dispenser needs to be reduced as much as possible, to reduce the rate of loss of $^{18}F$-FDG resulting from the distance of the tubing. However, in case the distance between the synthesizer and the dispenser has to be increased due to the system structure, using push syringe and $N_2$ gas simultaneously is a useful method for minimizing $^{18}F$-FDG residues.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

산업 현장에서 연소 과정중 발생되는 NOx를 제거하기 위한 방법으로 현재 연구 및 상업 화 대상에서 가장 널리 사용되고 있는 것이 SCR(Selective Catalytic Reduction)과 SNCR((Selective non-catalytic reduction)이다. 그러나, SCR의 경우 높은 장치비와 유지비 가 소요되어, 최근에는 로 내에 요소용액을 직접 분사하여 NOx를 질소와 수증기로 환원시켜 제거하는 방법인 SNCR에 대한 연구가 활발히 진행되고 있는 추세이다.(중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.95-101
• /
• 2002

There are many effective parameters to high concentration ozone generation. These parameters became very important elements should be considered before designing ozone generator. After designing, there are many peripheral parameters to greatly affect to high concentration ozone generation also. In this study, of many effective peripheral parameters on high concentration ozone generation, the effects of flow rate of inlet oxygen gas and some kinds of additional gases on ozone concentration were investigated As a result, when inlet oxygen gas was introduced at the range of 0.75［LPM］～2.00［LPM］ the highest ozone concentration of 71145［ppm］ was obtained at 1.25［LPM］. When the additional nitrogen gas was mixed to oxygen gas at the range of 0.0［vol%]～6.4［vol%］ the highest ozone concentration of 73135［ppm］ was obtained at 0.8［vol%］ of nitrogen gas. This showed 3［%］ increasing compared to the case of pure oxygen gas inlet. When the additional argon gas was mixed to oxygen gas at the range of 0.0［vol%］～6.4［vol%］ the highest concentration of 67288［ppm］was obtained at 0.8［vol%］of argon gas. This is decreased value compared to that of introducing the pure oxygen.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.77-83
• /
• 2002

We measured flame extinguishing concentration and flue gas composition in the n-heptane fuel cup-burner system using inert gas agents such as nitrogen, argon, carbon dioxide and their mixtures. The flame extinguishing concentration of binary gaseous mixture was well predicted by model which contains the flame extinguishing concentration and composition of pure components. The higher average specific gravity of the mixed inert gas agents, the more excellent flame extinguishing performance. And the structure of enclosed space also affects the fire extinguishing. The composition of carbon dioxide in the flue gas was decreased with increasing extinguishing agent used. Nitrogen monoxide production is not related with increasing nitrogen, but increased at rapid mass flow rate of air in the cup-burner.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.451-456
• /
• 2014

Lab scale experiment was carried out to study biological wastewater treatment technology developed for shipboard. RCM process using BM(Beneficial Microorganisms) was investigated for practical application on shipboard sewage treatment. RCM process is an environmental friendly treatment system, with minimum production of sludge. In the test, BOD5, CODcr, T-N and T-P were reduced a 96%, 97%, 78% and 81.68% respectively. From the result it was suggested that RCM process with BM might be a suitable process for shipboard sewage treatment, maintenance of useful microorganisms and creating special environment as the SDC tank is circulating in the non-biodegradable organics sludge generated during the wastewater treatment, thus reducing the amount of sludge generated. Therefore, the RCM process does not require additional equipment to strengthen it to meet the marine pollution standards.

• Journal of Convergence for Information Technology
• /
• v.11 no.1
• /
• pp.128-135
• /
• 2021

The possibility and effectiveness of cryopreservation was determined to assess survival rates and improve stock management of thawed embryos of Manila clam, Ruditapes philippinarum. The ideal freezing rates were designed and tested to allow cryoprotectants to equilibrate across the membrane during freezing. Survival rates ranging from 0 to 64.3% were obtained using a stepwise freezing protocol compared with 82.3% control rates. Embryos of Ruditapes philippinarum were equilibrated in 2 CPAs plus sea water for 10 min at 25℃ and then cooled at -1℃/min from 20℃ to -12℃. Straws containing more than 100 embryos were held at 12℃ for 5 min allowing equilibration after seeding and slowly cooled at 2℃/min. to -35℃ for 30 min for equilibration before quenching in liquid nitrogen. Dimethyl sulfoxide (DMSO) is the best cryoprotectant indicated for embryos of R. philippinarum with a survival rate of 64.3±3.28% in the presence of 2.0 M DMSO.